Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNP terminated thread external tapered BSPT of galvanized steel with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel carbon, galvanized.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight with thread external BSPT type AI 13480 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve sheet-metal type H used for crimping hoses on ends not having lock connecting sleeve with fitting. can be also used on ends NiTO and on ends quick couplings. Do crimp ferrules sheet-metal can be used hoses low-pressure for ok. 30 bar (depending on the diameter), made with various materials, under a condition, that Material hose is sufficiently soft for this kinds crimp. primarily hoses rubber of reinforcement textile and hoses, PVC. exists also possibility crimping hoses with a steel braid (e.g. hose type PZ). diameter inner sleeve should select appropriate for diameter outer hose, returning simultaneously attention, to Diameter hole in front parts ferrule fit for used fittings. Diameter D2 - Diameter inner. Diameter D3 - Diameter hole. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type B with thread external BSPT. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector CND Serrated intended for hoses rubber and plastic hoses industrial of galvanized steel. intended for mounting using bands or straps. Do repeated mounting and removal. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass connector angled type AI 13260 intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve sheet-metal type H used for crimping hoses on ends not having lock connecting sleeve with fitting. can be also used on ends NiTO and on ends quick couplings. Do crimp ferrules sheet-metal can be used hoses low-pressure (for ok. 30 bar depending on the diameter), made with various materials, under a condition, that Material hose is sufficiently soft for this kinds crimp. primarily hoses rubber of reinforcement textile and hoses, PVC. exists also possibility crimping hoses with a steel braid (e.g. hose type PZ). diameter inner sleeve should select appropriate for diameter outer hose, returning simultaneously attention, to Diameter hole in front parts ferrule fit for used fittings. Diameter D2 - Diameter inner. Diameter D3 - Diameter hole. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type A with thread internal BSP with seal flat, A nut hexagonal. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNP terminated thread external tapered BSPT of steel AISI 304 with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve sheet-metal type H used for crimping hoses on ends not having lock connecting sleeve with fitting. can be also used on ends NiTO and on ends quick couplings. Do crimp ferrules sheet-metal can be used hoses low-pressure for ok. 30 bar (depending on the diameter), made with various materials, under a condition, that Material hose is sufficiently soft for this kinds crimp. primarily hoses rubber of reinforcement textile and hoses, PVC. exists also possibility crimping hoses with a steel braid (e.g. hose type PZ). diameter inner sleeve should select appropriate for diameter outer hose, returning simultaneously attention, to Diameter hole in front parts ferrule fit for used fittings. Diameter D2 - Diameter inner. Diameter D3 - Diameter hole. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling Tee "T" type AI 13200 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with A nut constant with thread internal BSP. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector CND Serrated intended for hoses rubber and plastic hoses industrial of steel AISI 304. intended for mounting using bands or straps. Do repeated mounting and removal. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass Straight connector type AI 13460 intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple for soldering type LN, ball, sealing 60° cone, similar for DIN 7608. use a nut type UM (EC- 105…). Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BANJO straight type RS, close for DIN 7642, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNW for welding-in of carbon steel with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type A with thread internal BSP with seal flat, A nut knurled. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass insert reinforcing used for hoses flexible for connector type AI 13000. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNW for welding-in of steel AISI 304 with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread external BSP, cone internal 45°. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut type UM with thread metric or BSP, close for DIN 3870, for spigot type S and SF. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled with thread external BSPT type AI 13280 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose with thread external BSP for use in installations industrial, e.g. for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type SA with thread external BSP, sealing 60° cone, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNP terminated thread external tapered BSPT of steel AISI 316 with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel AISI 316.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting - Tee "T" with thread internal BSPT type AI 13240 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 18 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange fixed PN16 type CNWF of steel AISI 304 with "tail" for hose. intended for hoses rubber and plastic hoses industrial. assembly using bands or straps clamping. Material: steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting ball - insert for a nut. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCutting ring for a nut with thread metric type AI 13740 with brass. range diameters external joined pipes od 4 for 22 mm. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBolt for BANJO type HS with thread metric or BSP, close for DIN 7643. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting angled 90° type RBU with a nut, ball, sealing 60° cone, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut hexagonal for fittings ball - insert for a nut. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight with thread internal BSP type AI 13500 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BANJO type RL for soldering, close for DIN 7642. Material: steel carbon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting ball for hose - insert for a nut - for use in installations industrial, e.g. for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA nut brass AI 13680. range diameters external joined pipes od 4 for 22 mm (Diameter D). standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type A with thread external BSP with seal flat. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type S of a cone sealing 60°, ball, close for DIN 7608, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. use a nut type UM (EC- 105…). Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled with thread internal BSP type AI 13290 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 18 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
