Strong industrial hose delivery for water and for compressed air, intended for use in heavy conditions in industry, construction ways, a even in quarries. Layer inner resistant to mist oil. resistant to abrasion and conditions atmospheric. commonly used and proven in various use industrial. hose Available in colour black and yellow. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.

Widely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric and abrasion. Not is resistant to oil, not recommended also for air with mist oil. W comparison with a hose "Tubes 2116" has thicker wall. Inner layer: white EPDM rubber. Reinforcement: a polyester braid. Outer layer: red or blue EPDM rubber micro-perforated. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.

Strong hose delivery intended for conveying water or compressed air in systems irrigation, agriculture, mines, on squares construction etc. Layer inner smooth, co ensures minimal losses flow. Layer outer lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant to abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. Not requires washing and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). use for air should be always preceded analysis risk in case accidental disconnection or bursting hose. Hose material: black blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: from 10 bar to 25 bar (water), from 7 bar to 18 bar (air) - depending on the diameter hose. temperature use for water: od -20°C up to +80°C, momentarily up to +100°C.

Hose delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 10 bar. Operating temperature: od -40°C up to +120°C, outer up to +530°C.

Very light economical hose, flat at rest, intended for conveying water. economical solution for low pressures working and not requiring conditions use. used in agriculture e.g. for irrigation crops, construction and in other fields industry. Hose material: blue PVC. Reinforcement: spacer polyester. Working pressure: 3 bar. Operating temperature: od -5°C up to +60°C.

Hose delivery intended for conveying compressed air, for compressors, hammers, drills and other tools pneumatic. thanks to low weight, flexibility, strong construction and high pressure working accepted and with success used od many lat in construction (in particular in companies occupying demolition), industry and mining. extremely strength and durable thanks to high quality materials and the structure. Reinforcement with circumferentially woven braid polyester completely bonded and surrounded rubber in original process production extrusion blend rubber on hot through braid. resistant to radiation UV. Layer inner smooth, co ensures minimal losses flow. yellow, grooved surface outer is resistant abrasion, oils and ozone and perfectly visible on square construction. flat at rest, co facilitates operation and storage. resistant to loads longitudinal. used most often of couplings claw for air (spacing 42 or 41 mm) mounted clamps cast iron (ordered separately). Available also in color black. use for air under high pressure should be always preceded analysis risk in situation accidental disconnection or bursting hose and possible use protections. maximum pressure working fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. length standard roll: 200 m. Hose material: yellow blend NBR/PVC with barrier resistant on UV, pressed in a polyester braid in process extrusion hose. Working pressure: from 12.5 bar to 25 bar - depending on the diameter hose and temperatures. Operating temperature: od -30°C up to +75°C (momentarily up to +80°C).

Light, resistant to abrasion hose delivery designed for conveying water potable in large quantities under high pressure working. flat at rest, co facilitates operation and storage. O minimum elongation under pressure and without tendency for coiling and screwing. Reinforcement with circumferentially woven braid polyester, completely bonded and surrounded thermoplastic polyurethane in original process production extrusion polyurethane on hot through braid. Meets the requirements of for conveying cold water potable: PZH (nr B.BK.60110.0171.2022, valid for 01.04.2025 r.), KTW-DVGW, WRAS(BS6920) and NSF61. intended for solid, temporary and emergency installation supply in water potable. used for supply water on vessels, in field installations military, actions humanitarian, service events mass, festivals etc. On special order Available also in other diameters for 305 mm. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting and given force breaking.. length standard roll: 200 m. Hose material: blue polyurethane - polyether (PU) pressed in braid (spacer textile) in process extrusion hose. Working pressure: from 18 bar to 25 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +75°C (for Clean water).

Very light and flexible hose delivery flat-folding for water for hydrants and pumps fire-protection, without couplings. hose hydrant compliant with the standard EN 14540 used is in hydrants internal acc. to EN-671-2. hose for pumps used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used in industry, construction, agriculture and mining. can serve for conveying water, water sea, water industrial, solutions some substances chemical. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, resistant to conditions atmospheric and abrasion. Available also in version yellow luminescent (DN52, DN75, 20m, for pumps). certificates (Poland): hoses compliant with conditions technical regulation MSWiA with 27.04.2010. Inner layer: insert PVC (PU for DN110). Reinforcement: a polyester braid. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +60°C.

Very light, flat (at rest) industrial hose delivery, PVC. thanks to appropriate matched reinforcement textile spacer polyester has good resistance to elongation. intended for pressure conveying water and other liquids. Widely used in agriculture, construction, industry marine, mining, etc. length standard roll: 50 m or 100 m. Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: blue PVC. Working pressure: from 2.5 bar to 8.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -5°C up to +60°C.

High-pressure, very durable hose for conveying compressed air. designed for use in heavy conditions squares construction, mines etc. for supply equipment o high wear compressed air. extremely strength and durable thanks to high quality materials and double-jacket the structure – double reinforcement with circumferentially woven braid polyester high strength, completely coated and lined thermoplastic polyurethane (PU). hose o very sound resistance to abrasion, resistant to puncture, abrasion and oil. hose not extends under pressure and is resistant to loads longitudinal. flat at rest, co facilitates operation and storage. Available in the molds ready lines o length 20 or 40 m, with factory mounted fitting. use for air under high pressure should be always preceded analysis risk in case accidental disconnection or bursting hose and possible use protections. maximum pressure working hose fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. Hose material: polyurethane (PU). Reinforcement: double polyester braid. Outer layer: orange polyurethane PU). Working pressure: from 30 bar to 43.75 bar - depending on the diameter hose. Operating temperature: od -50°C up to +110°C.

Strong, flexible rubber hose fire-protection, adapted for use on drums. hose ANKARA EN made is according to standards EN 694 consists ofcej European standard for hoses for solid installation fire-protection and used commonly on drums in solid hydrants in buildings, installations industrial, centres commercial etc. Layer inner with rubber EPDM, resistant to light chemicals and fire-protection agents foam-forming. Layer outer with rubber EPDM resistant to abrasion and conditions atmospheric. perfectly works mounted on drums, ensuring Flow rate water at incomplete unrolling hose. presented hose ANKARA made is acc. to requirements older standards DIN 14817: 1991 intended for powder and foam agents firefighting, with layer inner with conductive rubber NR/SBR and o pressure working up to 20 bar, also adapted for use on drums. Inner layer: EPDM rubber (ANKARA EN), conductive rubber NR/SBR (ANKARA). Reinforcement: cord synthetic. Outer layer: EPDM rubber (ANKARA EN), rubber SBR (ANKARA). Working pressure: from 7 bar to 20 bar - depending on size and kinds hose. Operating temperature: od -20°C up to +60°C (ANKARA EN), od -40°C up to +70°C (ANKARA).

Extremely Light, flexible hose delivery for water intended for internal protection fire-protection buildings. Layer inner with high quality rubber synthetic. layer external constitutes strong, dense a polyester braid with stiffening thin and densely arranged spiral plastic PET. hose is used in cabinets hydrants internal with section 20 m for 30 m hose wound on A reel (reel) with mounted on the end hose nozzle. compliant with the standard EN 694 for hoses firefighting ( type B class 5 ). W the scope protection fire-protection (Poland) has certificate conformity CNBOP-PIB. can be also used in industry - for water sea, water industrial and some light diluted chemicals and for air, dusts and light particles solid. Not is intended for use in heavy conditions external. Assembly with clamps or ferrules clamping on ends with smooth, free of sharp barbs spigots, in order to avoiding cutting layer internal. Inner layer: smooth synthetic rubber. Reinforcement: a polyester braid with stiffening spiral (cord) PET. Working pressure: from 7 bar to 12 bar - depending on the diameter hose. Operating temperature: od -20°C up to +60°C.