0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic AGR, type ZBZ110, steel carbon, Y

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP thread, cone sealing 60° (AGR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling push-in Nitto Kohki series PCV PIPE CUPLA with thread external BSPT, intended for connecting tubes copper with other element installation. connection takes place po insertion tubes for coupling and pressing clamps, double sealing ensures tight connection. used for media gas (air, nitrogen, agents refrigerant - freon R12, R22, R134a together with with oil compressor). depending on medium should select type seal. use include testing tightness tanks, emptying and filling installation in air conditioners, refrigerators, etc.. Material: brass. Working pressure: 45 bar (vacuum for 0.13 Pa). Operating temperature: od -20°C up to +80°C (chloroprene), od -20°C up to +180°C (Viton), od -20°C up to +120°C (HNBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling with thread internal BSP or NPT (3/16" ÷ 1"), with valve, ideal is suitable sie for media gas. Z success can use also in hydraulics power for oil hydraulic, as and in industry for water, steam, fuels, oils czy chemicals. interchangeable with quick coupling ISO-B other manufacturers. Working pressure: up to 345 bar (depending on size quick coupling), (Safety factor 4:1). Material: steel carbon, galvanized. sealing: NBR. Operating temperature: od -40°C up to +121°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Standard socket quick coupling DIN with thread internal BSP. used mainly in machines agricultural. differing dimensions both od ISO-A, as and od ISO-B. standard: standard the manufacturer. use: hydraulics power (oil hydraulic). Working pressure: up to 400 bar (depending on size quick coupling). Material: steel galvanized. sealing: NBR (od -25°C up to +100°C). Flow rate has been stated at Δp = 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 6 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 45°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          ISO-A hydraulic bulkhead quick-coupling socket with a shut-off valve and thread external metric. version "push-pull" - Automatic disconnection at accidental tensioning line. Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR (temperature use od -25°C up to +100°C). Working pressure: 250 bar. Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket with a shut-off valve Nitto Kohki series SP CUPLA type A with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. Material: steel AISI 304. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR), od -20°C up to +180°C (Viton).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule BX7 for hoses thermoplastic type R6, R7 or R8. assembly - without skiving. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling EATON series J70000 with fitting for hose without valve. intended for cooling and temperature control moulds injection, for water and oil. Material: brass nickel-plated. sealing: Viton. Working pressure: 15 bar. Operating temperature: -15°C up to +200°C (in case use rings identifying socket temperature use up to +110°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, O-ring sealing on a 60° cone (DKOR), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DYROS series 40 with thread external without valve. Available with thread metric BSPT or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 45°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DYROS series 6 with tube o diameter 10 mm without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling plug cap DIN, PVC, type V, DNP

          All products | Hydraulic quick couplings
          0 €
          Cap protecting plug quick coupling DIN, prevents penetration for coupling and the system, contamination which result can damage element the system hydraulic. Material: PVC. color: red.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR 45°, type ZBW310, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DYROS series 6 with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling plug cap ISO-A, type SPAV, plastic

          All products | Hydraulic quick couplings
          0 €
          Quick-coupling socket cap ISO-A protecting coupling against contamination, which can result damage element and getting contaminants for the system. available in color: red, yellow, green, blue or black. Material: PE or PVC.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 6 with thread internal without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling with thread internal BSP or NPT (3/16" ÷ 1"), with valve. ideal is suitable sie for media gas, because has two o-rings and ring thrust, with success can use also in hydraulics power for oil hydraulic, as and in industry for water, steam, fuels, oils czy chemicals. interchangeable with quick coupling ISO-B other manufacturers. Working pressure: up to 345 bar (depending on size quick coupling), (Safety factor 4:1). Material: steel carbon, galvanized. sealing: NBR. Operating temperature: od -40°C up to +121°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR-F, type ZBW140, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket quick coupling NON DRIP with a female BSP thread, with valve, brass

          All products | General-purpose low-pressure quick couplings
          0 €
          Socket quick coupling CEJN NON DRIP (Leak-free) with valve, intended for conveying liquids (water, oil, chemicals etc.). flat surfaces contact minimize any leakage liquids and prevents inclusion air enabling simultaneously easy maintaining quick coupling in purity. socket and plugs in versions with a shut-off valve or without, with the possibility ich alternating connecting allow on achieving three configuration quick coupling: of a free bore, single shut-off (socket must have valve) and double shut-off (Leak-free). available are caps protecting quick coupling against contaminants, when is ono disconnected. in order to ensuring additional safety, when unacceptable is exchange in connection socket-plug possible is coding quick coupling color: green (standard) and optionally black, blue, red, white and yellow or tzw. coding a wrench, where socket and plug have additional grooves and lugs, enabling only properly matched connections quick coupling. Material: brass nickel-plated. sealing: NBR, Viton, EPDM. Working pressure: 20 bar. Operating temperature: od -15°C up to +205°C, depending on kinds seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic AGR-K, type ZBZ130, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP threadT, sealing on the thread using tape PTFE or sealant in flows; possible sealing on a 60° cone (AGR-K). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug DN 6 quick coupling with thread external BSP and metric, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 6 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body plug, valve), steel stainless (spring).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling socket cap ISO-F, PVC, type IF

          All products | Hydraulic quick couplings
          0 €
          Quick-coupling socket cap Leak-free ISO-F, protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color: red
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling 90° DYROS series 80 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKJ 90°, type ZJW210, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard „tail” hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug quick coupling NON DRIP with a female BSP thread, with valve, brass

          All products | General-purpose low-pressure quick couplings
          0 €
          Plug quick coupling CEJN NON DRIP (Leak-free) with valve, intended for conveying liquids (water, oil, chemicals etc.). flat surfaces contact minimize any leakage liquids and prevents inclusion air enabling simultaneously easy maintaining quick coupling in purity. socket and plugs in versions with a shut-off valve or without, with the possibility ich alternating connecting allow on achieving three configuration quick coupling: of a free bore, single shut-off (socket must have valve) and double shut-off (Leak-free). available are caps protecting quick coupling against contaminants, when is ono disconnected. in order to ensuring additional safety, when unacceptable is exchange in connection socket-plug possible is coding quick coupling color: green (standard) and optionally black, blue, red, white and yellow or tzw. coding a wrench, where socket and plug have additional grooves and lugs, enabling only properly matched connections quick coupling. Material: brass nickel-plated. sealing: NBR, Viton, EPDM. Working pressure: 20 bar. Operating temperature: od -15°C up to +205°C, depending on kinds seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling socket cap ISO-F, PVC, type SPLT

          All products | Hydraulic quick couplings
          0 €
          Quick-coupling socket cap Leak-free ISO-F protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color: red
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug DN 9 quick coupling with fitting for hose, without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Material: brass (body plug).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling 90° DYROS series 90 with fitting for hose without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling with thread internal BSP or NPT (3/16" ÷ 1"), with valve, for media gas. has two o-rings and ring thrust. interchangeable with quick coupling ISO-B other manufacturers. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases, chemicals). Working pressure: up to 200 bar (depending on size quick coupling), factor safety: 4:1. Material: brass. sealing: NBR (od -40°C up to +121°C), Viton (od -29°C up to +204°C), EPDM (od -54°C up to +149°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR 90°, type ZBW210, steel AISI 316 (PH)

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKM, type ZMW160, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal on cone 60°, (DKM). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling screw-together type TC intended for use in installations hydraulic cars trucks - tippers. socket equipped is in a nut locking, co allows on assembly in version bulkhead. allowed is twisting quick coupling under pressure residual max. 50 bar (pressure static, which remained in system po switching off the actuator). Application: hydraulics power (oil hydraulic). Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +106°C. Working pressure: up to 350 bar (depending on size). Safety factor 3:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling socket cap for moulds injection, DYROS

          All products | Quick couplings for injection molds
          0 €
          Socket cap body molds for quick couplings DYROS. Available with thread metric or BSPT. Material: brass. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DYROS series 90 o length 100 mm with thread external without valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Quick-coupling plug cap CEJN 525 and 526, PVC, black

          All products | Hydraulic quick couplings
          0 €
          Quick-coupling plug cap CEJN series 525 and 526 (NORDIC RANGE) protecting coupling against contamination, which can result damage element and getting contaminants for the system. Material: PVC. color: black.
        Go to Top