- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrength hose delivery intended for conveying water industrial, sewage, sludge, etc. Inner layer: black smooth rubber SBR. Reinforcement: cord synthetic o high strength. Outer layer: black rubber SBR. Working pressure: 10 bar. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible, having resistance to creasing hose intended for discharge air, fumes, dusts fibres, dust and other light substances. used in vacuum cleaners industrial. made with conductive polyethylene (PE) and elastomer, o low resistance material, excellent for applications in which required is avoiding accumulation charges electric (should then effectively earth hose). shaped in profile hose outer spiral reinforcing, left-handed, allows screwing on appropriate ends for vacuum cleaners with thread left e.g. ends plastic for hose EVA: DN32, 38 and 50 or appropriate ends conductive. Assembly of the hose with clamps on suitable ends, pipe spigots etc. is also possible. hose o diameter DN38 and DN50 has declaration conformity with requirements ATEX and standards TRGS 727 and It can be used in zones hazard explosion, under a condition effective earthing hose and carrying out through user analysis risk. Hose material: black special polyethylene (PE) and elastomer. Reinforcement: spiral reinforcing shaped in material hose. Operating temperature: od -20°C up to +60°C (podworking pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery, o thick wall, intended for conveying substances food demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. hose specially designed for conveying oils and fats. Widely used in industry oil and fat. Layer outer in fully resistant to fat and aging. standards and requirements : industry food, contact with food 1935/2004/EC and 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73. Inner layer: white NBR rubber/PVC. Reinforcement: two layer cord synthetic. Outer layer: blue rubber CR. Working pressure: 10 bar. Operating temperature: -15°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose non-conductive charges electric - leakage in conditions testing acc. to standards SAE 100 R8 smaller od 50 µA for voltage 246 kV/m through 5 min., used in the vicinity installation electric. Inner layer: polyester. Reinforcement: two aramid braids. Outer layer: orange polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8 (except DN8). Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWEICON paste assembly Anti-Seize HIGH-TECH, type pen 30 g
All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings0 €Paste assembly Weicon Anti-Seize High Tech ensures protection against corrosion, seizing and „cold welding”, especially on steel stainless. recommended especially for use in extreme conditions e.g.: at high temp., agents aggressive, high pressures, as well as for lubrication loaded bearings and surfaces sliding (only in engines low-speed). eliminates squeals and squeaking, has good properties sealing, allows easy assembly and disassembly components. economical in use and free od metals toxic, consistency NLGI - Class 1. Operating temperature: od -40°C up to +1400°C. conducts heat. resistant to changes temperatures and loads pressure (230N/mm 2 ). Packaging - pen type 30 g.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: rubber. Operating temperature: od -40°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate plug quick coupling without valve with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality plug water quick coupling NiTO 1" with thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCap SAFLOK® DC is a variant of the CAMLOCK coupling with protection against accidental opening of the coupling. The protection consists of resilient latches placed in the levers of the socket. When the lever is closed, the latches lock automatically. Unlocking during opening requires pulling back the latches. cap SAFLOK® DC is compatible with other CAMLOCK couplings made in accordance with the MIL-C-27487 standard. Spare parts are available: levers with latches and pins. Material: steel AISI 316. Sealing: NBR. Working pressure: 20 bar (3/4" ÷ 2"), 10 bar (2.1/2" ÷ 4"). Operating temperature: from -40°C to +93°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 5311, configuration L, intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female. Operating temperature: od -10°C up to +110°C
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve butterfly, wafer-type, centric, type WAFER, intended for installation industrial. used m.in. for cold or hot water, water potable, water sea and demineralised, alcohols, milk limestone, hydroxide sodium and other media, taking into account resistance chemical material valve and seal. can be closed and opened manually, or using actuator pneumatic. handle sets valve in 10 positions: „open”, „closed” and in positions intermediate. Dla sizes od DN200 occurs lever with regulation stepless. meets requirements the directive PED 2014/68/UE. has certificate PZH and certificate Lloyd’s Register. Material body: cast iron gray EN-GJL-250, coated epoxy 80 µm. Material disc: cast steel stainless CF8M. Material stem: steel stainless AISI 416. Material lever: aluminum. sealing disc and stem: EPDM. Connection: flange PN6 for DN40 ÷ DN150 and DN300, PN10/PN16 for DN32 ÷ DN300, ASA150 for DN40 ÷ DN300, JIS 10K for DN40 ÷ DN300. Operating temperature: od -15°C up to +110°C (momentarily up to +130°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever 90°, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Size: 1/8", 1/4" or 1/2". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve check type 2281 intended for installation industrial, It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve. valve can be mounted in any position, in accordance with direction flow the medium indicated on body. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material spring: steel AISI 302. butterfly valve: brass. sealing butterfly valve: FKM. Connection: BSP female. Operating temperature: od -10°C up to +90°C. minimal pressure opening: 0.02 bar for 3/8" ÷ 2.1/2"; 0.1 bar for 3" ÷ 4".
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for cleaning pipes. Material: steel stainless. Working pressure: up to 250 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle spray 1/4" o simple concentrated jet FULL JET with thread external BSPT for mounting e.g. with lance (connection using sockets). Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal Filter intended for installation water-supply, sanitary, heating, irrigation, industrial etc. Filter must be mounted in accordance with direction flow the medium marked on body. pressure working dependent is od temperatures use. Filtration grade: 500 µm (od 1/2" for 2"), 600 µm (od 2.1/2" for 4"). Body material: brass. sealing: NBR. insert filter: steel stainless AISI 304. Connections: BSP female. Operating temperature: od -10°C up to +90°C. Working pressure: 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose delivery flat-folding for water for hydrants and pumps fire-protection, without couplings. hose hydrant compliant with the standard EN 14540 used is in hydrants internal acc. to EN-671-2. hose for pumps used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used in industry, construction, agriculture and mining. can serve for conveying water, water sea, water industrial, solutions some substances chemical. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, resistant to conditions atmospheric and abrasion. Available also in version yellow luminescent (DN52, DN75, 20m, for pumps). certificates (Poland): hoses compliant with conditions technical regulation MSWiA with 27.04.2010. Inner layer: insert PVC (PU for DN110). Reinforcement: a polyester braid. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting push-in swivel with an O-ring for gun high-pressure. prevents breaking line. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBar directional multi-outlet with outlets 1/4" for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBellows rubber for compensator Intended for work in installations in which the medium consists of oils mineral, fats vegetable and animal, oils in aerosol, water with addition substances anti-corrosion. Inner layer: NBR rubber. Reinforcement: cord nylon. Outer layer: rubber CR. Operating temperature: od -30°C up to +90°C (depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge left-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp left-handed OML Intended is for mounting hoses type CLIP (hoses this type made are with impregnated fabric, a spiral coiled in left made is with sheet and wire steel) np: KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 430 (bolt of galvanized steel).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn AKBO HEAVY DUTY water gun BIG FLOW, o increased flow. Made of stainless steel, insulated trigger, EPDM rubber guards, Viton seals. It has an adjustable outlet nozzle, smooth flow regulation and a trigger lock. Connection: 1/2" BSP female. maximum Working pressure: 24 bar. Maximum Operating temperature: +95°C. Flow rate: 48 l/min (5 bar), 120 l/min (24 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC 37° with thread external BSP (gasket elastomer o cross-section rectangular). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape for system Band-It® Junior, to system clamping using band in ready sections formed in clamps o double loop with built-in a buckle. tape o smooth surface and jej correct assembly on non-serrated hose creates tight fixing fittings preventing leaks for the inside crimp. assembly using tool BD-C00189 with an adapter pre forming clamps BD-J00199. Material: steel AISI 201.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule screw for hoses hydraulic rubber non-skive type 1SN(R1AT). Use only with fitting screw-together od this the same supplier (TI-S...). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle assembly sensor proximity for actuators ISO 15552, in version with sleeve cylindrical. Material: aluminum. Diameter: 160 ÷ 200.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPractical A handle magnetic for guns for air CEJN series 208 and 210, which facilitates daily operation the operator. has strong magnet, which allows mounting on metal surface. A handle is easy in mounting, both po right as and po left side gun.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket envelope-type for part female (socket) coupling CAMLOCK. Material: PTFE/NBR. Operating temperature: from -40°C to +93°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA seal with a circular cross-section (O-ring) for general use (range 18x1.5 ÷ 35x4). Material: NBR, hardness 70 acc. to Shore'a.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery intended for conveying water potable cold (+23°C) and hot (+60°C). its white, mirror surface inner prevents formation biofilm on walls and is easy in maintaining purity. Not affects negatively on properties health, free of is phthalates, ADI (contaminants origin animal) and other substances hazardous subject restrictions in accordance with REACH. Not causes changes properties organoleptic water even in elevated temperatures. Layer outer resistant to abrasion, ozone and conditions atmospheric. cleaning: steam water o temp. +120°C through maximum 30 min. (in system open), other (CIP) in consultation with Tubes International. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) approval for water potable: PZH B.BK.60110.0823.2022 (valid for 10.08.2025 r.), UBA-Leitlinie, KTW, DVGW W270, D.M.174. 3) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP); EC 10/2011 (Layer inner). Inner layer: smooth o mirror surface technopolymer. Reinforcement: a synthetic braid. Outer layer: blue technopolymer. Working pressure: from 10 bar to 20 bar, depending on the diameter hose. Operating temperature: od -30°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, very flexible and pliable hose intended for discharge aggressive vapours chemical and gases, ventilation and air conditioning. good resistance chemical on solvents and other aggressive vapours. Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. used mainly in industry chemical. on request available diameter in the scope 40 ÷ 610 mm. hose occurs in two versions: P2PE - standard and P2PE EL - conductive electrically o resistance R ≤10 4 Ω, compliant with the directive ATEX 2014/34/EU and the standard TRGS 727, made with black polyethylene. Hose material: polyethylene (PE), transparent - version standard P2PE, black - version conductive electrically P2PEEL. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: aluminum. Operating temperature: up to +350°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug water quick coupling NiTO CLICK 1/2" with thread external. quick coupling NiTO CLICK to water quick coupling made according to profile very popular plastic quick couplings garden and compatible with them. sealing using an O-ring placed externally on plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. intended for water, water of agents cleaning for use in industry, services, horticulture, agriculture etc. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: od -30°C up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OMC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve type 4170 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: NBR. Connection: BSP female. Operating temperature: od -20°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve butterfly, wafer-type, centric, type WAFER, intended for installation industrial. used m.in. for cold or hot water, water potable and other media, taking into account resistance chemical material valve and seal. can be closed and opened manually, or using actuator pneumatic. handle sets valve in 10 positions: „open”, „closed” and in positions intermediate. Dla sizes od DN200 occurs lever with regulation stepless. meets requirements the directive PED 2014/68/UE. has certificate PZH and certificate Lloyd’s Register. Material body: cast iron gray EN-GJL-250. Material disc: cast iron spheroidal nickel-plated EN-GJS-400-15. Material stem: steel stainless AISI 416. Material lever: aluminum. sealing disc and stem: EPDM. Connection: flange PN6 for DN40 ÷ DN150 and DN300, PN10/PN16 for DN32 ÷ DN300, ASA150 for DN40 ÷ DN300, JIS 10K for DN40 ÷ DN300. Operating temperature: od -15°C up to +110°C (momentarily up to +130°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSwivel coupling straight GGIL with bearing ball intended for oil hydraulic. used in systems demanding connections swivel in order to eliminating stresses hoses. coupling intended for performing revolutions at small moment swivel. Not is designed for use with large speeds swivel. Material: steel galvanized. sealing: NBR. Connection: male / BSP female. Operating temperature: od -40°C up to +106°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight with thread external tapered, type R1C, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.


















































