0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic high-pressure adapter, type A101, with threads external BSP (sealing 60° cone). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nozzle spray 1/4″ o flat jet, BSPT male, steel stainless

          All products | Foam- washing- and dosing devices
          0 €
          Nozzle spray 1/4" o flat angled jet with thread external BSPT for mounting e.g. with lance (connection using sockets). Material: steel stainless.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 32 ÷ 63.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lance extension ventilated with insulation thermal, intended for a high-pressure washer. length: 400 mm. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" BSP male. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Clamp worm-drive bridge left-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp left-handed OML Intended is for mounting hoses type CLIP (hoses this type made are with impregnated fabric, a spiral coiled in left made is with sheet and wire steel) np: KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          An AKBO hot-water gun BIG FLOW, o increased flow. Made of stainless steel, insulated trigger, EPDM rubber guards, Viton seals. Use for hot water requires particular caution. It is not intended for steam! Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 120 l/min. Operating temperature: up to +95°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom multiple for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom multiple for welding for mounting clamps DIN 3015 standard type 100/101. Dla group dimension 0 ÷ 3 number clamps: 10. Dla group dimension 4 ÷ 5 number clamps: 5. Dla group dimension 0 occurs one hole under bolt. Dla group dimension 1 ÷ 6 available two holes under bolt. Material: steel carbon or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Counter-flange SAE 6000 with socket for welding-in for connections with a flange connection, without bolts mounting and seal. Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Spring protecting on hose, type SK

          All products | Fittings for hoses for pressure washers
          0 €
          Spiral with wire steel protecting the fitting against damage mechanical with outside, co extends service life line.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ferrule pressure of steel stainless, type FM

          All products | Tube fittings for hydraulic pipes
          0 €
          Ferrule pressure, type FM, placed in nut, allows appropriate pressing tubes metric for fitting (fittings). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule screw for hoses thermoplastic type SAE100R7, MT1, MTH1, OL7M or VE7M. Use only with fitting screw-together od this the same supplier (TI-S...). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Gasket profiled acc. to DIN3869, Viton

          All products | General purpose seals
          0 €
          Gasket profiled acc. to DIN3869 for fittings high-pressure with thread metric and/or inch acc. to DIN 3852-11E. Material: Viton, hardness 80 acc. to Shore'a.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose medium wall thickness intended for extraction and conveying powders, grains, light granulates and other bulk materials. intended for use in industry food and pharmaceutical. used m.in. for milk in powder, grain, rice, coffee, tea, flour (version PAS). pliable, fairly compressible, almost smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P7 OL PU FOOD – spiral with wire steel (copper-plated); P7 L PU PAS FOOD – spiral of steel stainless, Material hose permanently antistatic (R ≤10 8 Ω, in accordance with TRGS 727). hoses P7 OL PU FOOD and P7 L PU PAS FOOD are compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. are suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: spiral with wire steel (P7 OL PU FOOD), spiral with wire of steel stainless AISI 301 (P7 L PU PAS FOOD). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strength, light and very flexible (also in low temperatures) hose suction-delivery designed specially for industry wine for heavier conditions use. strong than hose SPIRABEL ® SNTS, o thicker wall. hose for demanding applications, intended for conveying water, beer, good win and alcohols o a concentration up to 50% and temperature up to +40°C, juices, drinks and other products food. Not contains phthalates, co allows use go also for milk and its dairy products. not recommended for oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures very good strength on vacuum and kinking hose. transparent wall allows on easy control visual movement substances. smooth surface inner reduces losses flow and ensures ease cleaning. ease cleaning, ensures also smooth surface outer, which occurs in hoses for diameter 63 mm. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. as hose reinforced spiral with hardened PVC (without braid) is characterized a certain elongation under pressure, co should take into account in use, especially in temperatures above +40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: spiral with hardened PVC. Working pressure: from 5 bar to 7 bar, depending on the diameter hose. Operating temperature: -25°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality plug water quick coupling NiTO 3/4" with thread external, for gun NiTO I. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Buckles for the system band Band-It® Standard. Buckles with so-called "noses" secure the end of the band after bending. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 4354 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSP female/BSPT male. Operating temperature: od -20°C up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve butterfly for gas, o drive manual type 1141H

          All products | Butterfly valves (dampers)
          0 €
          Valve butterfly, wafer-type, centric, type WAFER, intended for gas installation industrial, in class pressure MOP5. can be closed and opened manually or using actuator pneumatic. handle sets valve in 9 positions: „open”, „closed” and in positions intermediate. meets requirements the directive PED 2014/68/UE. has certificate NF ROBGAZ on compliance with standards EN 13774 and EN 549. Material body: cast iron spheroidal EN-GJS-500-7, coated epoxy 250 ÷ 300 µm. Material disc: cast steel stainless CF8M (for DN100), cast iron spheroidal EN-GJS-500-7 (od DN125). Material stem: steel stainless AISI 420. Material lever: aluminum. sealing disc and stem: NBR. Connection: flange PN10/PN16 for DN32 ÷ DN200, ASA150 for DN40 ÷ DN200. Operating temperature: od -20°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve with connection NAMUR adjustable electrically, serves for control drives pneumatic. Ich Connection allows on mounting valves directly on body actuators. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - Hostaform®. Working pressure: 2.5 ÷ 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 1100 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve check type 2280 intended for installation industrial, It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve. valve can be mounted in any position, in accordance with direction flow the medium indicated on body. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material spring: steel AISI 302. butterfly valve: POM. sealing butterfly valve: NBR. Connection: BSP female. Operating temperature: od -10°C up to +90°C. minimal pressure opening: 0.02 bar for 3/8" ÷ 2.1/2"; 0.1 bar for 3" ÷ 4".
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Swivel coupling angled 90° GG90 with bearing ball intended for oil hydraulic. used in systems demanding connections swivel in order to eliminating stresses hoses. coupling intended for performing revolutions at small moment swivel. Not is designed for use with large speeds swivel. Material: steel galvanized. sealing: NBR. Connection: male / BSP female or NPT. Operating temperature: od -40°C up to +106°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Swivel coupling with three independent ways, brass

          Accessories for pneumatic fittings | All products
          0 €
          Swivel coupling with three independent ways on inlet threads internal BSP, at the outlet threads internal BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting push-in straight with thread external NPT, series S, type PCC. economical solution for connecting flexible hoses pneumatic o inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter two-piece long for high-pressure equipment washing, brass

          All products | Fittings for hoses for pressure washers
          0 €
          Adapter two-piece long for high-pressure equipment washing with connection metric M22x1.5. Z an O-ring po obu sides the connection. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A101 with threads external BSP (sealing 60° cone). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Very light, ecological hose ducting ECO 0.4

          All products | Ducting and ventilation hoses
          0 €
          Very light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Block branching with fittings Ø 4-6-8 mm, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional with with fittings Ø 4-6-8 mm for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle extended bent o diameter hole 2.3 mm for guns for air, terminated thread metric M12x1.25. Material: steel nickel-plated. maximum pressure: 10 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket coupling CAMLOCK B with a thread external, polypropylene

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket coupling CAMLOCK B with a BSPT male thread made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 7 bar, depending on the coupling size. Material: polypropylene glass-fiber-reinforced. Levers: steel AISI 304. Sealing: EPDM.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 20, 25.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic screw DKM, type SMW160, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic screw, type S, with a female metric thread with a nut, sealing metal - metal on cone 60°, (DKM). Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Lance for foam, BSP female / plug DN11.8, steel stainless

          All products | Foam- washing- and dosing devices
          0 €
          Lance for foam assembled with a plug quick coupling DN 11.8, without nozzle. Connection: (inlet) plug DN11.8 / (outlet) 1/2" BSP female. available length: 22 cm, 50 cm and 60 cm. Material: steel stainless.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, rubber, type 100

          All products | Clamps for hydraulic pipes
          0 €
          A clamp DIN 3015 standard type 100 (without plate upper) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Dla group dimension 0 occurs one bolt with an Allen head, for group dimension 1 ÷ 6 available two screws with an Allen head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: rubber. Material bolts: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure Water gun SG35 with lance MT8 for applications industrial. Suitable for warm and cold water. The lever mechanism does not require the operator to use much force, which translates into comfortable and pleasant work. part outlet lance terminated thread internal metric M22x1.5. lance made of steel stainless or galvanized. Gun Available is also with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. pressure The permissible: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Pliers hand for straps CAW

          All products | Clamps for mounting ends
          0 €
          Strength pliers hand intended for mounting straps clamping type CAW or similar (with 1 or 2 "ears"). profile jaws allows easy and reliable clamp face and side.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tape o double loop with built-in a buckle system Band-It® Ultra-Lok® made of steel AISI 201 Intended for most demanding applications. double loop increases strength clamps. tape o smooth surface and jej correct assembly on non-serrated hose creates tight fixing fittings preventing leaks for the inside crimp. assembly using tools electric BD-UL9010 or BD-UL4000B. Do mounting straps 1/2" for devices mounting should use washer adjustment BD-M09387. Material: steel AISI 201.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols o a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. thanks to external corrugation hose is exceptionally pliable and flexible. recommended way mounting with fitting are special clamp shell EASY SHELL, o shape adapted for serrated hose. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, spirals steel. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.6 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Sealant for pipes and flanges AN30-572, pen

          All products | Seals and thread sealants
          0 €
          Anaerobic sealant for pipes and flanges (with PTFE). is characterized high viscosity and medium strength. has certificate DVGW - approval for installation gas and hot water. has certificate KTW - approval for installation water potable. possible disassembly at use standard tools. maximum size thread: M 80. Operating temperature: -60°C up to +150°C. Packaging of the "pen" type with a capacity of: 50 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        Go to Top