0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fairly Light, flexible and pliable, resistant to temperature two-layer hose suction intended for discharge vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer impregnated fabric glass with fibres of steel stainless, grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +650°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, fuels, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyester. Reinforcement: a steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 325 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose delivery for hot air SAHARA® BD

          Air and water hoses | All products
          0 €
          Thick, strong, flexible, resistant to kinking hose delivery designed for conveying hot, dry air of compressor for installation bowl tankers. used in tankers road for transport bulk materials: cement trucks, feed trucks etc. and in other installations industrial. Layer outer resistant to ozone and conditions atmospheric. length standard: 60 m or 120 m. Inner layer: white rubber EPR. Reinforcement: cord synthetic. Outer layer: blue EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +200°C (momentarily up to +240°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimper hand TNT250/B

          All products | Hoses and fittings for air conditioning
          0 €
          Crimper hand TNT250/B (clamp six-jaw) for air conditioning. head crimpers allows gear ratio jej through hose, co is important at crimping ends angled. W set is found : 6 sets jaws for hoses standard and o reduced diameter outer, grease, plastic caliper, Case.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cap coupling fire STORZ with a chain, aluminum

          All products | Symmetrical claw couplings
          0 €
          Cap STORZ, fitted with a chain protecting against loss, Intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Available in version forged o pressure working up to 16 bar and in version cast, characterized by significantly smaller strength o pressure working up to 6 bar. Material: aluminum. Working pressure: 16 bar (coupling forged), 6 bar (coupling cast). gasket: white NBR rubber (coupling forged), black NBR rubber (coupling cast).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF HTC series HIGH-FLOW for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. recommended for applications demanding high value flow both during filling as and venting. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Straight connector KN, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Straight connector KN intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A107K with A nut, with threads external BSP (sealing 60° cone). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Block pressure-gauge three-way, steel galvanized on black

          All products | UHP adapters and accessories
          0 €
          Block pressure-gauge three-way enabling connection many hoses high-pressure for one pump, as well as connection pressure gauge. made of steel zinc-plated on black. Diameter bore 5 mm (3/16"). Connections: 2 x 1/4" BSP, 1 x 1/2" BSP (O-ring NBR). sealing Connections: cone internal 120°. Working pressure: 2000 bar (maximum pressure working in case use the gasket metal-rubber to 1000 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses thermoplastic and hydraulic rubber for gases high-pressure with thread internal Whitworth W21.8 x 1/14" L (thread left), Connection acc. to PN-81/M-69229 (DIN477-1 nr 1). purpose - m.in.: hydrogen, methane, other gases flammable. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Crimped fitting with thread internal, type FALP, for hoses brake PTFE. Material: carbon steel, chrome-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cutter for hoses plastic TC15

          All products | Pneumatic hoses
          0 €
          Cutter for hoses plastic o diameters in the scope 3 ÷ 15 mm. color: black. Material blade: steel stainless.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A clamp protecting coupling STORZ against disconnection. consists with bent clamps steel galvanized and rubber flange. a clamp should select for specific size DN coupling. Material clamps: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LET-LOK® straight fitting with thread internal BSP for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer for water MRA, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Regulator MRA series BIT. A version used for regulating pressure in water installations, without secondary venting. Pressure gauge connection: 1/8" BSP female. Output pressure range: 0 ÷ 2 bar, 0 ÷ 4 bar or 0 ÷ 12 bar. Supply pressure: up to 13 bar. Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tool case BURGACLIP

          All products | Hoses and fittings for air conditioning
          0 €
          Tool case with aluminum contains complete set tools necessary for fast mounting lines for air conditioning using system BURGACLIP. set consists of special pliers for mounting straps fittings for air conditioning BURGACLIP, which equipped are in mechanism rack-and-ratchet for easier use; with manual cutter for hoses intended for air conditioning type BU-3090 in sizes DN 8, 10, 13, 16 and with dual-range devices for manual cutting hoses with rubber and plastics o diameter outer for 42 mm, with the possibility preliminary settings blade cutting for given diameter hose 6 mm and 26 mm. shape blade allows efficient cutting at minimum effort. ideal solution for workshops automotive, which provide services in the scope repairs lines for air conditioning automotive.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible hose for compressed air, o sound resistance to oils mineral. very resistant to abrasion. yellow color ensures excellent visibility hose. hose has thickened layer external co 20 m, marked on hose („TAGLIO / CUT”) and in these places recommended is cutting hose and assembly fittings. then space mounting fittings is reinforced and more resistant to bending. Z roll 60 m can make 3 lines o length 20 m with fittings. possible is however use hose with fittings mounted in places non-thickened. hose used for hammers and drills pneumatic. Inner layer: black blend PVC/NBR. Reinforcement: double polyester braid. Outer layer: black or yellow blend PVC/PU. Working pressure: 20 bar - dependent od temperatures. Operating temperature: od -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive). very good resistance chemical on aggressive chemicals thanks to internal layer film PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard PETEF, black conductive foil PTFE PTFE - version antistatic PETEF EL. Material hose Outer layer: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: polyurethane. Working pressure: from 210 bar to 250 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose plastering NIAGARA®

          All products | Bulk material transfer hoses
          0 €
          Hose delivery for plastering. Layer inner with rubber o sound resistance to abrasion (70±5 mm 3 acc. to ISO 4649 / DIN 53516). The antistatic inner and outer layer prevents the accumulation of electric charges. multiple Reinforcement cord synthetic ensures high strength pressure. Layer outer resistant abrasion, conditions atmospheric and ozone. used for spraying wet mortar: cement, plaster and gypsum in works construction. commonly used for units plastering. Mounted with special plastering ends. hose NIAGARA LIGHT to version economical o slightly thinner wall (marked letter "L" on the end index). length standard: 60 m and 40 m version LIGHT (or 120 m - contact with Tubes International). Inner layer: black rubber SBR/NR. Reinforcement: cord synthetic. Outer layer: black rubber SBR/NR. Working pressure: 40 bar. Operating temperature: od -40°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug coupling CAMLOCK ER with a serrated hose fitting, aluminum

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Plug coupling CAMLOCK ER (reducing) with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a roller of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Symmetrical reducing straight connector KRS intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled 90° with long spigot, type R47, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure 90° adapter type A116N with thread external BSP (sealing ISO-1179 type G: O-ring with a retaining ring) adjustable and with thread external BSP (sealing 60° cone). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 45° KSBB 45, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Elbow 45° (R = 1.5 x d) KSBB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hoses thermoplastic and hydraulic rubber for gases high-pressure with thread internal Whitworth W21.8 x 1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 6). purpose - mi.in.: ammonia, argon, dioxide carbon, hel. Material: Material: steel AISI 304 - A fitting, brass - A nut.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimped BANJO fitting 15°, steel carbon

          All products | Brake hoses and fittings
          0 €
          Crimped BANJO fitting 15° for hoses brake PTFE. Material: carbon steel, chrome-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Bar for parallel mounting lines o various diameters. Material: resin acetal. color black. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nipple reducing with thread external enabling connection quick couplings and hoses UHP of each other, a also connection for blocks connection UHP. Working pressure: from 2000 bar to 3000 bar (depending on size thread). Material: steel carbon, galvanized on black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LET-LOK® straight fitting with thread external NPT for a metric tube Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Grease nipple compressed air LUB, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Grease nipple (lubricator) series NEW DEAL with connection BSP female, ensures correctness lubrication mist oil equipment in installations pneumatic and is characterized high stability dosing. Supply pressure: up to 18 bar. Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Pin for coupling CAMLOCK, steel AISI 304, type P

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Pin for coupling CAMLOCK, type P. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Pliers assembly BC for air conditioning

          All products | Hoses and fittings for air conditioning
          0 €
          Special hand pliers made with strong material intended for fast and simple mounting straps fittings for air conditioning system BURGACLIP. equipped in mechanism rack-and-ratchet for easier use. functional tool, which works also in hard reachable places, such as chamber engine car passenger. pliers ensure tightness and strength connections. ideal solution for workshops automotive, which provide services in the scope repairs lines for air conditioning automotive.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule AF-TH for hoses PTFE type HYPERLINE SB, FX, V. Diameter D1 - Diameter outer. Diameter D2 - Diameter lock. Diameter D3 - Diameter inner. Material: steel carbon.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner with white, smooth, resistant to abrasion rubber (80 mm 3 acc. to ISO 4649, formerly DIN 53516), compliant with requirements FDA 21 CFR 177.2600 for contact with food. Two built-in copper wires which, after earthing (or connection to an earthed end), discharge electric charges. Layer outer resistant to conditions atmospheric and ozone. A hose intended for conveying dry food substances: grain, sugar, powders, feed, granulates, etc. and other abrasive substances, e.g. PVC granulate, for which a white, non-staining inner layer is required. It is not intended for work in ATEX explosion-hazard zones. Standards and requirements: Food industry, food contact: 1935/2004/EC, 2023/2006/EC (GMP), BfR XXI kat.4. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: white rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 6 bar to 8 bar, depending on the diameter hose. Vacuum: 0.9 bar. Operating temperature: -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve throttle pneumatic aluminum RFL B

          All products | Pneumatic valves
          0 €
          Valve throttle series RFL type B, regulating value flow air in obu directions. serves for regulation speed working equipment actuating in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Material body: aluminum. Material housing: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set for connections flange (EN 1092), type SZ1. W set: screws DIN931 - 4 pcsi, a nut DIN934 - 4 pcsi and washer DIN125A - 4 pcsi. Class properties mechanical: 5.6 - screws; 8 - a nut; 140HV - washer. Selection of bolts and nuts for flanges according to the table in the attachment. Material: steel carbon, galvanized galvanically.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter STORZ with thread internal BSP intended for installation transfer for liquid and bulk substances. used in firefighting, systems irrigation, industry chemical, food, agriculture etc. characterized by high, unobstructed diameter bore. O symmetrical construction parts connection, thanks to this in straight way combines je of each other. connect can element o the same spacing lugs. Material: steel stainless. Working pressure: 16 bar. Gasket: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling angled 90° JIC 37° with thread external UNF (sealing on cone external 37°). Material: steel AISI 316.
        Go to Top