- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for bending pipes hydraulic in the scope diameters external 6 ÷ 42 mm (Wall thickness for 4 mm) with manual two-stage pump hydraulic. has metal base with container on tools. Compatible with tools bending (ordered separately). weight: 48 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose smooth with PTFE o properties antistatic and excellent resistance chemical. properties conducting and dissipation charges electric obtained are through additive for 2.5% carbon - carbon black (carbon black) – PTFE AS. allows to on reduction resistance material hose and meeting requirements standards EN12115 demanding resistance between ends hose smaller od 10 6 Ω/m. hose intended is in particular for aggressive chemical substances non-conductive e.g. solvents organic, which Flow rate in standard hose PTFE can cause accumulation charges electric and related with this hazard. high cleanliness and distribution additives carbon in PTFE ensures compliance with FDA 21 CFR 178.3297 in the scope materials approved for time contact with food. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: antistatic PTFE (teflon), black. hardness Shore (D): 60. Working pressure: od 5.5 up to 12 bar. Operating temperature: od -200°C up to +260°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead HYPERJET PLUS for lances. Material: brass, steel stainless and plastic plastic. Working pressure: up to 250 bar. Operating temperature: up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead rotary. Material: brass, steel stainless and plastic plastic. Working pressure: up to 255 bar. Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHead rotary MH o the highest resistance, Intended for lances type MT1, MT2, MT3 and MT6. Material: steel stainless. Working pressure: up to 500 bar. Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° DN 6 quick coupling with thread external BSP and metric (sealing on a 60° cone), with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 6 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° DN 9 quick coupling with thread external BSP and metric (sealing on a 60° cone), with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° quick coupling measurement SNAP-CHECK production Swedish intended for measuring pressure in systems hydraulics power. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug possible is under pressure up to 300 bar. pressure working for disconnected with socket plug is 600 bar, a minimal pressure bursting 2400 bar. pressure working for connected socket and plug is also 600 bar, whereas minimal pressure bursting to 1300 bar. precision made quick couplings, ensures tightness and reliability points measurement the system hydraulic. range connections for plugs measurement allows easy configuration connections. socket quick couplings, supplied are standard in set with red caps with plastic. Working pressure: 600 bar. pressure switching: up to 300 bar. Material body: steel galvanized. sealing: NBR. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket DN13 quick coupling with thread internal BSP and metric, with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 13 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket DN 9 quick coupling with fitting for hose, with valve or without valve. used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 15 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bulkhead quick coupling for hose with a nut and valve intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. characteristic The design (not contain balls and ferrule protective) allows on easier, secure connection and disconnection one hand. An audible click signals a successful connection. length L - length total. Material: polypropylene. sealing: EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bulkhead quick coupling with fitting for hose, without valve intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. The design ich allows on easy operation one hand, a characteristic click allows have certainty effective connections. available are also versions with valve and in color black. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: acetal. Working pressure: for 6.9 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bulkhead quick coupling with fitting for hose, without valve intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. The design ich allows on easy operation one hand, a characteristic click allows have certainty effective connections. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: polypropylene. Working pressure: for 6.9 bar. Operating temperature: od 0°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate socket bulkhead quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. characteristic The design (not contains balls and ferrule protective) allows on easier, secure connection and disconnection one hand. An audible click signals a successful connection. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bulkhead quick coupling with valve for hose intended is for detection gases, equipment medical, analyzers chemical, printing inkjet, as equipment equipment optical, etc. characteristic The design (not contain balls and ferrule protective) allows on easier, secure connection and disconnection one hand. An audible click signals a successful connection. length L - length total. Material: polypropylene. sealing: EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsISO-A hydraulic bulkhead quick-coupling socket with a shut-off valve and thread external metric (DIN 2353). Application: hydraulics power (oil hydraulic). quick coupling used mainly in machines agricultural. Commonly called "euro couplings". interchangeable with quick coupling ISO-A other manufacturers. Material: steel galvanized. sealing socket: NBR. Operating temperature: od -20°C up to +100°C. Working pressure: up to 250 bar. Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA QC6 quick coupling socket compliant with the Standard Instrumentation standards with valve, with connection LET-LOK®, for mounting bulkhead (panel). QC6 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested at a pressure of 68 bar in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. Material: steel AISI 316. Working pressure: 103 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket NiTO quick coupling high-pressure for water with thread external metric. Available version with thread long. Material: brass chrome-plated. Working pressure: 180 bar. Operating temperature: +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket measurement intended for connecting with a plug TEMA 100. W version with thread external and internal (with an adapter). Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 40 with thread external and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 90 with thread external and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 30 with fitting for hose and valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 40 with fitting for hose and valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 6 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 80 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 45° DYROS series 90 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° quick coupling Hansen Beverage with thread external UNF 7/16″-20 of a cone 90°. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° quick coupling Hansen Beverage with fitting for hose. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 6 with thread external and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 80 with thread external and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 40 with fitting for hose without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 6 with fitting for hose without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 30 with fitting for hose and valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 40 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. Material seal Connections: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 6 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket swivel with a shut-off valve quick coupling EWO series EW-411 SAFETY DN7.4 with thread external or internal BSP. quick coupling for air disconnected without pressure, equipped in push-button mechanism locking. compliance with standards ISO 4414 and EN983. version rotational sockets allows po screwing for installation set easily button in convenient position. disconnection occurs in two stages: first pressing button vents quick coupling at secured plug. second pressing releases plug, which can be safe removed. plug o profile compliant with with popular the standard EURO DN7.2. recommended plugs of steel (not with brass). Material: -body socket: outlet - steel galvanized, part central - anodized aluminum, part inlet - brass nickel-plated; -spring and balls of steel stainless. flow capacity: 1800 l/min (Pe = 6 bar,Δp = 1 bar, air). Working pressure: 12 bar. Operating temperature: od -10°C up to +90°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket swivel with a shut-off valve quick coupling EWO series EW-411 SAFETY DN 7.4 with thread external or internal BSP. single shut-off quick coupling for air disconnected without pressure, equipped in push-button mechanism locking. venting quick coupling against disconnection allows avoid effect recoil, when plug is detachable. ensures to safety use the operator in accordance with ISO 4414 and EN983. action quick coupling is straight: first pressing button vents quick coupling at secured plug. second pressing releases plug, which can be safe removed. possibility turn socket allows po screwing for installation set easily button in convenient position, also under pressure. Do socket recommended are plugs o profile compliant with with popular the standard EURO DN7.2 of steel (not with brass). on request socket can be made in other color: black, red, grey, yellow, green, or entirely made of steel stainless. Material: - body socket: outlet - steel galvanized, part central - anodized aluminum, part inlet - brass nickel-plated; - spring and balls of steel stainless. flow capacity: 1960 l/min (Pe = 6 bar,Δp = 1 bar, air). Working pressure: 16 bar (minimum 1 bar). Operating temperature: od -20°C up to +100°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling swivel with a shut-off valve, EWO series EW-411, SAFETY, DN 7.4 with fitting for hose. single shut-off quick coupling for air disconnected without pressure, equipped in push-button mechanism locking. venting quick coupling against disconnection allows avoid effect recoil, when plug is detachable. ensures to safety use the operator in accordance with ISO 4414 and EN983. action quick coupling is straight: first pressing button vents quick coupling at secured plug. second pressing releases plug, which can be safe removed. possibility turn socket allows po screwing for installation set easily button in convenient position, also under pressure. Do socket recommended are plugs o profile compliant with with popular the standard EURO DN7.2 of steel (not with brass). on request socket can be made in other color: black, red, grey, yellow, green, or entirely made of steel stainless. Material: - body socket: outlet - steel galvanized, part central - anodized aluminum, part inlet - brass nickel-plated; - spring and balls of steel stainless. flow capacity: 1960 l/min (Pe = 6 bar,Δp = 1 bar, air). Working pressure: 16 bar (minimum 1 bar). Operating temperature: od -20°C up to +100°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a shut-off valve quick coupling EWO series EW-411 SAFETY, DN7.4, with thread external or fitting for hose. quick coupling for air disconnected without pressure, equipped in push-button mechanism locking. compliance with standards ISO 4414 and EN983. disconnection occurs in two stages: first pressing button vents quick coupling at secured plug. second pressing releases plug, which can be safe removed. recommended plugs of steel (not with brass), o profile compliant with with popular the standard EURO DN7.2. Material: - body socket: outlet - steel galvanized, part central - anodized aluminum, part inlet - brass nickel-plated; - spring and balls of steel stainless. flow capacity: 1800 l/min (Pe = 6 bar,Δp = 1 bar, air). Working pressure: 12 bar. Operating temperature: od -10°C up to +90°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with a shut-off valve Gromelle type MLDB with thread internal type "flat-face" made of steel o the highest purity (melting vacuum VIM- VAR). used m.in. in installations industrial, in which required is retention ideal purity (industry nuclear, food, pharmaceutical, production semiconductors, perfumes). has stem securing against accidental disconnection. Not It is intended for connecting - disconnecting under pressure. Working pressure: 25 bar (Safety factor 4:1). Operating temperature: od -20°C for + 200°C (Viton), od -40°C for + 150°C (EPDM). Material: steel AISI 316L.



















































