- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a male BSP thread, type EM, found wide use in in laboratories, medicine, industry pharmaceutical, chemical and food. The design allows multiple assembly without the need use tools. series 1W+ not requires smoothing barbs on ends hoses. Intended is for flexible, corrugated with smooth surface inner and unreinforced hoses PTFE (PTFE). Material: PVDF. Working pressure: 4 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° bulkhead BURGACLIP with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° JIC INTERLOCK with a female UNF thread, 74° cone with an O-ring, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° NON SKIVE with a female UNF thread, with seal flat (DKO 90), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° NON SKIVE with a female BSP thread, with seal on cone 60° with an O-ring (DKOR 90), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° rotational for hose with a male BSP thread type EM, found wide use in laboratories, medicine (e.g. devices for dialysis), industry pharmaceutical, chemical and food. has integrated ferrule, co facilitates assembly, a locking hose occurs using ring clamping, is found inside knurled a nut. thanks to its flexibility ring clamping It can be used several times in this same coupling. Intended is for flexible, smooth, unreinforced hoses, PVC, PA, PUR, PTFE, FKM, silicone and hoses TYGON ®. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. sealing: O-ring FKM. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular without a nut for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP without a nut for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with thread internal UNF for compressor, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with thread external UNF, with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with valve side R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with valve upper R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular BURGACLIP with valve R134 HP (16 mm) or LP (13 mm) with thread external UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular with thread internal UNF, version compact, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular with thread internal UNF, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular with thread external UNF, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° tubular with thread external UNF, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° with thread internal UNF SAE, 45° cone, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° with thread external UNF, with socket, for hose for air conditioning type 3356 and 3090. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° with thread external UNF with socket, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° with thread external UNF, with socket, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BURGACLIP for soldering, for hose for air conditioning type 3090. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BURGACLIP for compressor, with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BURGACLIP with thread internal UNF ORFS - sealing flat, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting BURGACLIP with thread external UNF for quick coupling, for hose for air conditioning type 3090. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for soldering for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal for washers high-pressure. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for a nut railway under a clamp RS, without the gasket. Material: aluminum. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose straight with a male BSP thread, type EM, found wide use in in laboratories, medicine, industry pharmaceutical, chemical and food. The design allows multiple assembly without the need use tools. Intended is for flexible hoses reinforced a braid synthetic (PVC, silicone). Material: polypropylene, PVDF. Working pressure: 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose straight with a male BSP thread, type EM, found wide use in in laboratories, medicine, industry pharmaceutical, chemical and food. The design allows multiple assembly without the need use tools. series 1W+ not requires smoothing barbs on ends hoses. Intended is for flexible, corrugated with smooth surface inner and unreinforced hoses PTFE (PTFE). Material: polypropylene, PVDF. Working pressure: 4 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread internal NPT for hose, type 130HF, Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting terminated thread external BSPT with serrated "tail" for hose, type 62340. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose with ending tube metric and inch, Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type B with thread external BSP. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hoses teflon HPG-HI for gases high-pressure with thread internal Whitworth W21.8 x 1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 6). purpose - mi.in.: ammonia, argon, dioxide carbon, hel. Material: Material: steel AISI 304 - A fitting, brass - A nut.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hoses PTFE for gases high-pressure with thread internal Whitworth W24.32x1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 10). purpose - nitrogen. Material: Material: steel AISI 304 - A fitting, brass - A nut.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hoses thermoplastic and hydraulic rubber for gases high-pressure with thread internal Whitworth W24.32x1/14", Connection acc. to PN-81/M-69229 (DIN477-1 nr 10). purpose - nitrogen. Material: Material: steel AISI 304 - A fitting, brass - A nut.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting lever with "tail" for hose o diameter 6 mm, equipped in special catch, which stays fitting we proper position and pin releasing valve valve. has rubber a gasket and metal cap. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting socket SKV with "tail" type INTERLOCK Intended for hoses hydraulic type 4SH, R13, R15 (in size 2"). Material: steel galvanized.



















































