- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based, gasoline, oil drive, oil heating, fuel aviation JET A1, kerosene. marked on bellows single yellow stripe and white letters LT. Inner layer: NBR rubber (NBR). Reinforcement: cord nylon. Outer layer: rubber CR (chloroprene). Flanges: galvanized carbon steel. Operating temperature: od -40°C up to +90°C (momentarily +100°C depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsIntended for work in installations in which the medium consists of products petroleum-based and fuels o content compounds aromatic up to 50%, water cooling with oil agents anti-corrosion, oil lubricating and hydraulic, water sea. Marked on bellows yellow-blue-yellow stripe. Inner layer: rubber HNBR (NBR). Reinforcement: cord steel. Outer layer: rubber CR (chloroprene). Flanges: galvanized carbon steel. Operating temperature: od -35°C up to +100°C (momentarily +120°C depending on medium).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet rings metric (front + rear) for use in connectors type LET-LOK®. amount: 10 pcs. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet quick coupling without valve - socket and plug with fitting for hose intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection. available are also versions with valve and in color black. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: acetal. sealing: O-ring NBR. Working pressure: for 6.9 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet quick coupling without valve - socket and plug with fitting for hose intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: polycarbonate. sealing: O-ring NBR. Working pressure: for 6.9 bar. Operating temperature: od -40°C up to +121°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA complete ANFOR lever coupling with a weld-in connection for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel black. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete Tee plug-in BANJO, type R55, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting "T" for hose, type NA with thread external BSPT and metric. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° BURGACLIP for compressor, with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° BURGACLIP with thread internal UNF ORFS - sealing flat, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° BURGACLIP with thread internal UNF SAE - sealing on a 45° cone, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° BURGACLIP with thread external UNF, with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° bulkhead BURGACLIP with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° JIC INTERLOCK with a female UNF thread, 74° cone with an O-ring, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° NON SKIVE with a female UNF thread, with seal on cone 74° (DKJ), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° NON SKIVE with a female metric thread, with seal on cone 24°, O-ring (DKOS 45), series heavy, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular without a nut for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular BURGACLIP without a nut for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular BURGACLIP with thread internal UNF for compressor, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular BURGACLIP with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular BURGACLIP with thread external UNF, with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular BURGACLIP with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular with thread internal UNF, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular with thread internal UNF, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° tubular with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° with thread internal UNF SAE, 45° cone, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 45° with thread external UNF with socket, for hose for air conditioning type 3055. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° BURGACLIP for compressor, with valve R134 HP (16 mm) or LP (13 mm) with thread internal UNF, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° BURGACLIP with thread internal UNF ORFS - sealing flat, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° BURGACLIP with thread external UNF, with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° with thread internal for washers high-pressure. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a female BSP thread series 1B type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting, a locking occurs using a nut knurled, which clamps flexible hose on ferrule connecting. possible multiple assembly. Intended is for flexible hoses with plastic (PVC, silicone ) reinforced a braid o specified wall thickness wall. A fitting withstands short strokes pressure up to 30 bar at temperature +20°C. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a female BSP thread series 1C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting. locking occurs using ring cutting, made with PEEK and a nut knurled. sealing ensures ring sealing made with PTFE. Intended is for smooth unreinforced hoses and tubes with harder plastics e.g. with PTFE, PFA, FEP, PA, PE. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a female BSP thread series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass, metal, polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in the tip occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a female BSP thread type EM, found wide use in laboratories, medicine (e.g. devices for dialysis), industry pharmaceutical, chemical and food. has integrated ferrule, co facilitates assembly, a locking hose occurs using ring clamping, is found inside knurled a nut. thanks to its flexibility ring clamping It can be used several times in this same coupling. Intended is for flexible, smooth, unreinforced hoses, PVC, PA, PUR, PTFE, FKM, silicone and hoses TYGON ®. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose, type NA with thread external BSPT and metric. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: polyamide (PA6).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a male BSP thread series 1C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting. locking occurs using ring cutting, made with PEEK and a nut knurled. sealing ensures ring sealing made with PTFE. Intended is for smooth unreinforced hoses and tubes with harder plastics e.g. with PTFE, PFA, FEP, PA, PE. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a male BSP thread series 1D type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for flexible hoses with PFA, which for mounting should ends expand thermally (tzw. flared connection). such solution guarantees no deposition particles, accumulation bacteria and elimination leakage medium. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a male BSP thread series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass, metal, polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in the tip occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° for hose with a male BSP thread, type EM, found wide use in in laboratories, medicine, industry pharmaceutical, chemical and food. The design allows multiple assembly without the need use tools. Intended is for flexible smooth unreinforced hoses, PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone and hoses TYGON ®. Material: polypropylene, PVDF. Working pressure: 16 bar.



















































