- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting mining STECKO Intended for crimping in hoses hydraulic type 2SN, supplied in set with a clamping ferrule. Material: steel free-cutting, galvanized. sealing: NBR (O-ring), teflon (ring thrust).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting bulkhead BURGACLIP with socket, for hose for air conditioning type 3090. allows on connection lines rubber with element the system air conditioning. clips and clamps available as separate assortment. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male UNF thread, sealing on a 74° cone (AGJ). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external tapered NPT, sealing on the thread (AGN), possible sealing on a 60° cone. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP thread, sealing flat - requires use additional the gasket flat (AGR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP threadT, sealing on the thread using tape PTFE or sealant in flows; possible sealing on a 60° cone (AGR-K). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic screw, type S, BANJO under bolt with a thread metric (RNM). Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z – of standard „tail” hydraulic for hose), BANJO under bolt with a thread metric (RNM). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread external metric, sealing on a 24° cone (CEL), series light. Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external metric, sealing on a 60° cone (CEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread external metric, sealing on a 24° cone (CES), series heavy. Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external metric, sealing on a 60° cone (CES), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external metric, sealing on a 60° cone (CES), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing on a 74° cone (DKJ), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread internal UNF, sealing on a 74° cone (DKJ). Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread, sealing on a 74° cone (DKJ). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing butt (DKL-FL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 45°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose (use ferrules marked additional letters "-PH" on the end index). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, sealing flat - requires use additional the gasket flat (DKR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, sealing metal - metal, cone A universal 24°/60° (DKS), angled 45°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread external BSPT, sealing on the thread using tape PTFE or sealant in flows. Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a thread external tapered NPT, swivel, sealing on the thread (AGN), possible sealing on a 60° cone. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female UNF thread with a nut, sealing flat (ORFS), angled 45°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic screw, type S, with a female BSP thread with a nut, cone sealing 60° (DKR), angled 45°. Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic screw, type S, with a female UNF thread, sealing on a 74° cone (DKJ). Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic screw, type S, with a male BSP threadT, cone sealing 60° / on the thread (AGR-K). Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread internal NPT, fixed, sealing on the thread using tape PTFE or sealant in flows. Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting angled 90° with a ferrule for hose thermoplastic FR 5 DN2 (1/12"), with thread internal UNF, type SAE, 45° cone. Material fittings: brass. Material ferrule: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting angled 90° with a ferrule for hose thermoplastic FR 5 DN4 (5/32"), with thread internal UNF, type SAE, 45° cone. Material fittings: steel carbon, galvanized. Material ferrule: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 45° INTERLOCK SAE 3000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 45° NON SKIVE SAE 6000 (SFS 45), series heavy, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.


















































