- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector 90° for hose series 1D type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. intended is for flexible hoses with PFA, which for mounting should ends expand thermally (tzw. flared connection). such solution guarantees no deposition particles, accumulation bacteria and elimination leakage medium. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector 90° for hose series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass and metal, for tubes polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in connector occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector 90° lever coupling LAUX 42 socket-plug with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector ANFOR 90° socket with "tail" for hose for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector ANFOR socket - plug for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector ANFOR plug with "tail" for hose for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing allows connection two coupling or fitting with fitting. Do connections required is on one side A nut, without rings (sealing occurs on cone), on the other side required is set - A nut and rings. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector socket SKV for use in systems hydraulic. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector angled "L" type cube with thread internal enabling connection quick couplings and hoses UHP of each other. Material: steel carbon, galvanized on black. Working pressure: 700 bar (at factor safety 4), 1000 bar (at factor safety 2.8).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector angled "L" type cube with thread internal enabling connection quick couplings and hoses UHP of each other. Working pressure: from 2000 bar to 3000 bar (depending on size thread). Material: steel carbon, galvanized on black.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector angled 90° BURGACLIP for hose type 3090 for air conditioning. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector flange SAE 3000 intended for connections of each other two flanges with grooves and rings O-ring. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with thread internal enabling connection quick couplings and hoses UHP of each other. Working pressure: from 2000 bar to 3000 bar (depending on size thread). Material: steel carbon, galvanized on black.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose series 1B type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting, a locking occurs using a nut knurled, which clamps flexible hose on ferrule connecting. possible multiple assembly. intended is for flexible hoses with plastic (PVC, silicone ) reinforced a braid o specified wall thickness wall. A fitting withstands short strokes pressure up to 30 bar at temperature +20°C. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose series 1D type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. intended is for flexible hoses with PFA, which for mounting should ends expand thermally (tzw. flared connection). such solution guarantees no deposition particles, accumulation bacteria and elimination leakage medium. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector for hoses thick-walled for air conditioning type 3055 and 3056. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight reducing connector for hose, type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing lever coupling LAUX 42 socket-plug with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing lever coupling LAUX 42 socket-plug with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector Tee for hose series 1B type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting, a locking occurs using a nut knurled, which clamps flexible hose on ferrule connecting. possible multiple assembly. intended is for flexible hoses with plastic (PVC, silicone ) reinforced a braid o specified wall thickness wall. A fitting withstands short strokes pressure up to 30 bar at temperature +20°C. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector lever coupling LAUX 42 socket-socket with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector lever coupling LAUX 42 plug-plug with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSerrated connector STORZ for hoses. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance for washing chassis. thanks to its length and bent the tip ideal is suitable for washing chassis as and other hard reachable places. part outlet lance terminated is thread internal 1/4" NPT. Working pressure: up to 280 bar. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) M22x1.5 female / (outlet) M18x1.5 male. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT3, intended for a high-pressure washer. Connection: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with thermal insulation, type MT1, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA lance with a handle, type MT6, intended for a high-pressure washer. Connection: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance for foam on both sides terminated thread internal BSP, without nozzle, for mounting e.g. with gun for water (with thread external on outlet). Connection: (inlet) 1/2" BSP female / (outlet) 1/2" BSP female. available length: 22 cm and 50 cm. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance double straight with handle for holding, intended for a high-pressure washer. Available o diameter 1/8" and 1/4". Connections: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance double straight with handle for holding, intended for a high-pressure washer. Available o diameter 1/8" and 1/4". Connections: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance double bent with knob intended for a high-pressure washer. Connections: (inlet) M22x1.5 male / (outlet) 1/4" NPT female. Available o diameter 1/8" and 1/4". Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance extension with insulation thermal, intended for a high-pressure washer. length: 325 mm. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" BSP male. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance extension with insulation thermal, intended for a high-pressure washer. length: 325 mm. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" BSP male. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance extension with insulation thermal, intended for a high-pressure washer. length: 375 mm. Connections: (inlet) 1/4" BSP male / (outlet) M22x1.5 female. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance extension ventilated with cover nozzle, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 250 bar. pressure The permissible: 280 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance bent of standard nozzle with nylon for foam with socket quick coupling with brass chrome-plated for connection for gun multifunction. available length: 30 cm, 60 cm and 90 cm. Material: steel stainless (lance).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance with nozzle in cover for spraying with quick coupling for connection for multifunction gun AKBO. available length: 30 cm, 60 cm, 90 cm and 200 cm. lance 200 cm telescopic. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLance bent type ST-85 intended for a high-pressure washer. Smooth regulation angle bend lance od 20° for 140° allows washing surface hard reachable e.g. chassis and roofs vehicles, tanks etc. Connections: (inlet) 1/4" BSP female / (outlet) 1/4" NPT female. Working pressure: up to 210 bar. Operating temperature: up to +150°C. Material: steel stainless.



















































