- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type A with thread internal BSP with seal flat, universal, A nut knurled. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNPH HEAVY DUTY terminated thread external tapered BSPT of steel AISI 304 with "tail" for hose o elevated strength. Intended for hoses rubber and plastic hoses industrial. assembly using special sheet-metal ferrule clamping type CNFH. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNPH HEAVY DUTY terminated thread external tapered BSPT of galvanized steel with "tail" for hose o elevated strength. Intended for hoses rubber and plastic hoses industrial. assembly using special sheet-metal ferrule clamping type CNFH. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type SA with thread external metric, sealing 24° cone, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type SA with thread external metric, sealing 60° cone, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNP terminated thread external tapered NPT of galvanized steel with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNP terminated thread external tapered NPT of galvanized steel with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting AK with thread external BSP of spring anti-kink o length 200 mm. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, bending of the hose is required. spring constitutes additional protection hose. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread external UNF, with socket, for hose for air conditioning type 3356 and 3090. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with a nut swivel with thread internal BSP. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting 45° with thread internal and a nut, type FAG, for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting 45° with thread external and a nut, type MAG, for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped BANJO fitting 90° for hoses brake PTFE. Material: aluminum anodized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped BANJO fitting 90° for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting for welding-in for hoses brake PTFE. Material: steel carbon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting with thread internal and a nut, type FAGP, for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting with thread external and thread internal, type MFALP, for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting with thread external and a nut, type MAGP, for hoses brake PTFE. Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrimped fitting with thread external, type MALP, for hoses brake PTFE (sealing cone external). Material: carbon steel, chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting crimping with "tail" for hose o diameter 6 mm, equipped in special clamp, which stays fitting we proper position. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug (cap) with thread external BSP (sealing on cone external 120°) intended for installation UHP (blocks connection). Material: steel galvanized on black. Working pressure: 3000 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with thread internal BSP, series 3F type EM. found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. supplied is without the gasket. Material: polypropylene, polyfluoride vinylidene. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with a thread external trapezoidal compliant with the DIN EN 12713 standard, Cover in 100% with threads in containers IBC various manufacturers. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug DIN 2353 Eaton Walterscheid™, type ROV: socket 24° DIN 2353 with thread external metric. occurs as: L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug DIN 2353 Eaton Walterscheid™, type VSTI-BE under wrench Allen: thread external BSP (sealing DIN 3852 type E – gasket elastomer o cross-section rectangular). Safety factor 4:1. occurs as: L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug DIN 2353 Eaton Walterscheid™, type VSTI-ME under wrench Allen: thread external metric (sealing DIN 3852 type E – gasket elastomer o cross-section rectangular). Safety factor 4:1. occurs as: L (series light), S (series heavy). Material: steel carbon, with coating galvanic Guardian Seal™.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete plug inlet mounted in upper parts bowl. intended for pouring oil at use gun filling. chamber made of steel mesh prevents penetration contamination for bowl during filling. W nut found space venting with filter, prevents penetration contaminants with air for the system during suction oil hydraulic. performed in two versions: C – version of steel, TPA – version with polyamide. Material a nut: steel chrome-plated (type C), polyamide (type TPA). Material flange fixing: steel chrome-plated (type C); polyamide (type TPA). Material chamber filling: steel galvanised. Material washer: plug (type C), rubber (type TPA). screws assembly: M5.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with socket hexagonal under wrench Allen of steel stainless type 62315 with thread external BSP or metric, O-ring. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug with socket hexagonal with thread external UNF with gasket, type 107HOB, for connector threaded intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316. gasket: O-ring FKM 90.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody Tee coupling BANJO of couplings socket type D6, intended for hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. body Tee coupling BANJO allows setting coupling in desired position. screws through-flow for body: D7, D8, D9, D10. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody tee BANJO, type R14, for bolts series D, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody tee BANJO, type R29, for bolts series D, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody plug quick coupling Hansen Beveragez thread internal UNF. coupling available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - Tee type "Y" BURGACLIP for hose type 3090 for air conditioning. Material: steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector "U" intended for connecting products Line On Line. Do fittings 6 mm and 8 mm. Material: polyamide.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cross for connecting hoses type NA. intended for use in systems control, in installations for transport gases and liquids, in installations vacuum, etc. Working pressure: up to 10 bar. Material: copolymer acetal (POM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector 45° lever coupling LAUX 42 socket-plug with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector 90° for hoses rubber and plastic soft (e.g. hoses TYGON®, hoses silicone), with wide application in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, polyfluoride vinylidene, teflon. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector for hose 90° type EM, found wide use in in laboratories, medicine, industry pharmaceutical, chemical and food. The design allows multiple assembly without the need use tools. intended is for flexible smooth unreinforced hoses, PVC, PA, PUR, PTFE, PFA, FEP, FKM, silicone and hoses TYGON ®. Material: polypropylene, PVDF. Working pressure: 16 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector 90° for hoses plastic metric series 1C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting. locking occurs using ring cutting, made with PEEK and a nut knurled. sealing ensures ring sealing made with PTFE. intended is for smooth unreinforced hoses and tubes with harder plastics e.g. with PTFE, PFA, FEP, PA, PE. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.


















































