- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule Z2T (PH) for hoses hydraulic rubber type 2SN (R2AT) or 3TE. assembly - without skiving. use for ends hydraulic (PH). Diameter D1 - Diameter outer. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule ZF2 (PH) for hoses hydraulic rubber type 2ST (R2A) or 4SP. assembly - skiving external. use for ends hydraulic (PH). Diameter D1 - Diameter outer. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule ONE SKIVE for hoses hydraulic rubber with a braid spiral type 4SP, 4SH, R12, R13 and R15. Use only with appropriate fitting hydraulic NON SKIVE od this the same supplier. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule ONE SKIVE for hoses hydraulic rubber with a braid spiral type 4SP, R13 and R15. Use only with appropriate fitting hydraulic NON SKIVE od this the same supplier. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule IL13 for hoses hydraulic rubber with a braid spiral type R13 and R15. Use only with fitting hydraulic INTERLOCK od this the same supplier. assembly - skiving external and internal. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule AF-T for hoses PTFE type SMOOTHBORE and HYPERLINE V. Material: steel AISI 304 or 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BPMTK for hoses thermoplastic type MTK. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BP7 for hoses thermoplastic type R7 (SAE100R7). assembly - without skiving. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule MC-BP7 for hoses thermoplastic type R7 (SAE100R7). assembly - without skiving. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrule BX8 for hoses thermoplastic type R8 (SAE100R8). assembly - without skiving. Diameter D1 - Diameter outer. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrules type LDR, LD, LR intended are for crimping ends stainless hygienic (with serrated tail) type NH-xxK-xxx and ends with tail for hose under a clamp shell RS, e.g. TW-KRS-xxx, NH-xxR-xxx in hoses industrial (rubber and plastic of reinforcement textile, optionally of spiral reinforcing - hoses suction - delivery). ferrule should select taking under attention diameter inner Dw and external Dz hose. length ferrule L can be slightly (several mm) greater od length tail fittings Lk. ferrules LR - only for ends under a clamp shell, LD - only for ends with tail serrated, LDR - ferrules for obu types ends. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle for gun for water AKBO with thread internal BSP in rubber cover with EPDM. Material: steel stainless. Operating temperature: up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle knife for tools EST-L intended for skiving outer layer rubber hoses hydraulic demanding larger length skiving. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA handle measuring for switching at low pressure. has Connection for pressure gauge, quick coupling with a shut-off valve, air vent (for TA-M-101-21A - valve).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, exceptionally soft and flexible, A universal hose laboratory free of phthalates (DEHP). excellent solution for complex installation equipment laboratory demanding small radii bends and repeated bends. Ten ultra soft hose is resistant to twisting and creasing and remains flexible in low temperatures (for -55°C). thanks to its softness not requires large forces for compression consists ofc ideal solution for pumps peristaltic o low moment swivel or powered battery. is characterized greater service life in use in pump peristaltic od typical hoses silicone, having simultaneously good resistance chemical on range corrosion media (acids, bases, salts, alcohols). compliant with requirements FDA for contact with food and REACH. sterilization only oxide ethylene. length full roll hose 15 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special, without DEHP). Maximum Operating temperature: +52°C. temperature brittleness: -55°C. Hardness: 40° Shore (A). Density: 1.1 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, ergonomic, light Water gun with adjustable nozzle outlet, smooth regulation flow and a lock trigger. housing: Material composite. nozzle: brass chrome-plated. Working pressure: up to 12 bar. Operating temperature: up to +80°C. Flow rate: 50 l/min (5 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible rubber hose delivery, intended for air, cold and hot water and light chemicals (with the exception acids). resistant to acetates and ketones. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (e.g. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. hose o strong the structure and small elongation under pressure. is suitable for use on drums. Layer inner electrically conductive (R 6 Ω, EN ISO 8031), Layer outer resistant to ozone and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid (PVA - alcohol polyvinyl). Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: od -40°C up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery for demanding, versatile applications in industry food. excellent for conveying many types products food such as: olive oil, wine, beer, juices fruit, milk, fats and alcohols o a concentration up to 96%. The inner layer is free of phthalates, plasticisers and components of animal origin. Contains no phthalates or bisphenol A and no polycyclic aromatic hydrocarbons (PAH Free), in accordance with ZEK 01.4-08 Cat.1. Tested for the presence of heavy metals. Layer outer resistant to conditions atmospheric and ozone. standards and requirements : industry food, contact with food 1935/2004/EC and EC 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat. 2, D.M. 21/03/73, 3-A Sanitary Standard 18-03 class II. Inner layer: white, smooth synthetic rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: blue synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, strong and flexible hose reinforced a braid, intended for higher pressures. made with polyether - polyurethane, free of plasticisers, exceptionally resistant to abrasion and tearing, is characterized small radius bending and flexibility even in low temperatures. withstands cyclic changes temperatures. resistant to oils, greases and fuels and range chemicals. found use in many branches industry: conveying products abrasive and viscous, sludge and pastes, conveying granulates and powders, lubrication and degreasing, for liquids cooling in automotive, for air in pneumatics and automation industrial. used in industry food and cosmetic - Meets the requirements of FDA 21 CFR 177.1680 and FDA 21 CFR 177.2600 for contact with food and NSF-61 for use for water potable (with limitation length hose depending od diameter). length full roll hose 30 m (od diameter internal 31.8 mm - 15 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: tygothane® - polyurethane - polyether (PU). Operating temperature: od -73°C up to +82°C. temperature brittleness: -73°C. Hardness: 85° Shore (A). Density: 1.12 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, two-piece, full-bore ball valve shut-off production European, made with casting, with a flange for direct mounting the actuator compliant with with the standard ISO 5211, intended for installation industrial. It can be used for air, gases neutral, water, chemicals, products petrochemical, etc., free od contaminants solid, compliant with resistance chemical materials valve. has protection stem against blow-out. meets requirements the directive pressure PED 2014/68/UE: a) for sizes for DN25 (1”) inclusive in the scope sound practice engineering (SEP), in accordance with art. 4 ust. 3 (without markings CE); b) for sizes od DN32 (1.1/4”) for liquids group 1 and 2 and for gases group 2 (other than hazardous) – marking CE, category I. compliant with the directive material RoHS 2011/65/UE and the regulation REACH 1907/2006. the given minimum temperature use refers to valve emptied with liquids freezing. Body material: brass nickel-plated. Material the ball: brass chrome-plated. sealing the ball: PTFE. sealing stem: 2 x O-ring FKM (Viton). Connection: thread BSP (ISO 228-1). Operating temperature: od -20°C up to +95°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal ball valve shut-off draw-off (tap) production European, made with casting, with a lever straight aluminum, with spigot under hose and an aerator, intended for installation industrial and water-supply. It can be used for water, chemicals, products petrochemical, etc., free od contaminants solid, compliant with resistance chemical materials valve. has protection stem against blow-out. meets requirements the directive pressure PED 2014/68/UE, in the scope sound practice engineering (SEP), in accordance with art. 4 ust. 3 (without markings CE). compliant with the directive material RoHS 2011/65/UE and the regulation REACH 1907/2006. pressure working dependent is od temperatures use. the given minimum temperature use refers to valve emptied with liquids freezing. Note: W case use on outside, necessary is emptying valve with water at negative temperature ambient! Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. Material aerator: polyamide (PA). sealing the ball: PTFE. sealing stem: 2 x O-ring NBR. Connection: thread BSP (ISO 228-1). Operating temperature: od -20°C up to +110°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight device for cleaning hoses and pipes compressed air. has two nozzles with plastic, one for hoses 3/16" ÷ 1" and the other for hoses 1" ÷ 2". pressing hose for nozzle opens valve air enabling cleaning hose. pressure air: min. 6 bar. Connection installation pneumatic: 1/2" BSP female.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for filling oil and suction and filtering oil of tanks presses, machine and systems hydraulic. parameters: drive electric 0.55kW, 400V; Pump 39 l/min; Filter 25 µm (available also 10 and 20 µm); Filter suction 125 µm. weight: 60 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for filling oil and suction and filtering oil of tanks presses, machine and systems hydraulic. parameters: drive electric 400V, 0.55kW; Pump 39 l/min; Filter 25 µm (available also 10 and 20 µm); Filter suction 125 µm; electronic counter flow oil; electronic indicator replacement filter. weight: 87 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for a nut railway compatible only with nut ends type KGW. Material: PTFE. Operating temperature: od -70°C up to +220°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for seal fittings for plug quick coupling Hansen Beverage 2-HG and 2-HL. temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for seal fittings for quick coupling Hansen Beverage 2-KG-F and 2-KL-F. temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for plug quick coupling Hansen Beverage 2-KG-F and 2-KL-F ensuring tightness quick coupling. temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket the connection with thread internal quick coupling NiTO. Material: NBR. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket metal-rubber for use in installations high-pressure (for quick couplings, adapters with thread external). version high strength. Working pressure: up to 1500 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat FF for flange 4" TTMA. The permissible pressure working, at which can be used a given gasket depends od temperatures and kinds medium (selection should agree with TUBES INTERNATIONAL®). Material: EPDM, SPETOGRAF GUS31, PTFE, Viton. Working pressure: up to 60 bar (EPDM), up to 100 bar (SPETOGRAF GUS31), up to 300 bar (PTFE). Operating temperature: od -30°C up to +120°C (EPDM), od -200°C up to +650°C (SPETOGRAF GUS31), od -200°C up to +220°C (PTFE), od -20°C up to +200°C (Viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat Intended for fittings with thread internal. Do applications food. no resistance to greases and oils. Material: silicone. Operating temperature: od -60°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket for couplings CAMLOCK AU and DU intended for sealing connection thread internal with parallel a thread external. Material: polyurethane. Operating temperature: from -20°C to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA flat IBC gasket for a flange PN made acc. to standards PN-EN 1514-1. The permissible pressure working, at which can be used a given gasket depends od temperatures and kinds medium (selection should agree with TUBES INTERNATIONAL®). at selecting the gasket should pay attention on dimension diameter outer, appropriate for class flange. For example: a gasket DN 10 PN40 is suitable for class PN10, PN16 and PN25. Material: SPETOGRAF GUS31. Working pressure: up to 100 bar. Operating temperature: od -200°C up to +650°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: rubber ethylene-propylene-diene (EPDM). range temperatures (approximate): od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA cover gasket MB (for tankwagen couplings) type TWF (for a 4" coupling, an O-ring gasket type TWO is used). Material: polyurethane (PUR). range temperatures (approximate): od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket KKG Intended for socket lever coupling LAUX 42. good resistance to ozone and conditions atmospheric. is suitable for water and air. Material: EPDM. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket KKG Intended for socket lever coupling LAUX 42. resistant to oils mineral, gasoline and most chemicals. Not is suitable for solvents containing ketones. Material: Viton. Operating temperature: od -30°C up to +250°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for fittings symmetrical standard GOST nr. 28352-89, 2217-66 (Russia). Material: NBR rubber. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat for coupling Guillemin. Material: EPDM.

















































