- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat for coupling Guillemin. Material: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for fittings symmetrical standard NOR. Material: NBR. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for fittings symmetrical standard ROTTA ROTH (Russia). Material: NBR. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket for fittings symmetrical standard SMS (Sweden). Material: NBR rubber. Operating temperature: od -10°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket connections TRI-CLAMP series 3C type EM. Material: EPDM, FKM, Gylon® and PTFE.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA profile gasket for a TW (tankwagen) coupling, type GSD (for a 4" coupling, an O-ring gasket type TWO is used). Material: polyurethane (PUR). range temperatures (approximate): od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA gasket for a hygienic coupling RJT acc. to BS 4825-5. Operating temperature: od -50°C up to +200°C. Material: silicone.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing bolts against loosening. is characterized medium viscosity and medium strength. has certificate KTW - approval for installation water potable. possible disassembly at use standard tools. maximum size thread: M 36. Operating temperature: -60°C up to +150°C. Packaging of the "pen" type with a capacity of: 20 and 50 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing bolts against loosening and for locking pins. is characterized medium viscosity and very high strength. hard removable. maximum size thread: M20. Operating temperature: -60°C up to +150°C. Packaging of the "tube" type with a capacity of: 50 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn anaerobic thread sealant, for materials passive without activator. Sealing of hydraulic and pneumatic systems. elevated viscosity, high strength – disassembly possible. Gap maximum 0.20 mm. color: green. Operating temperature: od -60°C up to +180°C. Packaging of the "pen" type with a capacity of: 20 and 50 ml.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsResistant thermally sealant in the molds semi-liquid paste binding for state non-sticky within 10 ÷ 15 minutes, a completely within 18 hours. supplied in tubes 310 ml for a dispenser. should go Use in well ventilated rooms and avoid contact with gasoline czy oil drive. Material: blend amorphous silica, polydimethylsiloxane (type silicone), oxide iron and catalyst. Operating temperature: od -59°C up to +287°C (momentarily up to +538°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for pressure washing hot water. Layer outer resistant to abrasion, oils and fats animal. large flexibility facilitates operation operator. Inner layer: black NBR rubber. Reinforcement: a single textile braid, a single steel braid or a double steel braid. Outer layer: yellow blend Carbryn®/NBR. Working pressure: 103 bar (for hose o nominal diameter internal DN12 - 83 bar), 206 bar or 310 bar, depending on type hose. Operating temperature: od -30°C up to +93°C (for hose with one a braid textile), od -30°C up to +120°C, other.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning dry ice – granulate solidified dioxide carbon. cleaning dry ice used is for removing coatings, adhesives, deposits etc. in many fields industry. advantage process is no damage cleaned surface, no aggressive substances chemical, no water in process (in comparison for cleaning high-pressure water), no residue abrasive (in comparison with sandblasting). dry ice (solidified dioxide carbon) has temperature for -78.5°C (temperature melting), moulds granulate and in during process sublimates for the molds gas. hose DRY ICE designed is specially for conveying dry ice. Layer inner smooth, with antistatic rubber synthetic resistant to abrasion and low temperature. Layer outer antistatic, resistant to abrasion, conditions atmospheric and ozone. mounted with use quick couplings of specialist guns for cleaning dry ice. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -55°C up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for pressure cleaning water sewers. standard length: 80, 100, 120, 150, 180, 200, 250 m. Inner layer: thermoplastic polyester. Reinforcement: double polyester braid. Outer layer: orange for JC 7 and red for JC 8 polyurethane, resistant to abrasion. Working pressure: from 200 bar to 345 bar (depending on the diameter and kinds hose). Operating temperature: od -40°C up to +55°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for high-pressure washing and flushing systems sewer. Layer outer resistant to abrasion, mist oil and conditions atmospheric. produced in accordance with the standard EN ISO 1307. Inner layer: black, smooth synthetic rubber. Reinforcement: double textile braid. Outer layer: black, smooth synthetic rubber. Working pressure: 250 bar. Operating temperature: od -40°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery o smaller diameters intended for conveying wine, juices fruit, beer, water. It can be used for hose reels drum. completely free of components origin animal, phthalates, plasticisers and nitrosamines. highly resistant to processes cleaning and disinfection used in industry food. Layer inner free of taste and odour. Layer outer resistant to abrasion and aging. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA, D.M. 21/03/73, BfR II. Inner layer: white smooth technopolymer. Reinforcement: a synthetic braid. Outer layer: blue smooth technopolymer. Working pressure: 10 bar. Operating temperature: -20°C up to +80°C (momentarily up to +90°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-staining, resistant to abrasion, oils and fats, high quality hose FORTRESS®. thanks to outer, antibacterial coating Microban® and high flexibility, found wide use in equipment washing in industry cosmetic, food, pharmaceutical, etc. Inner layer: black NBR rubber. Reinforcement: a single textile braid or a single steel braid. Outer layer: yellow rubber Carbryn® secured coating Microban®. Working pressure: 69 bar or 207, depending on type hose. Operating temperature: od -30°C up to +93°C or od -30°C up to +120°C, depending on type hose.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 78 bar to 400 bar depending on the diameter hose. Operating temperature: od -50°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 856 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 280 bar to 450 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose intended for most demanding applications. excellent resistance to pressure pulsating. thanks to special blend rubber Layer outer antistatic, highly flame-retardant, highly resistant to ozone, conditions weather, abrasion and radiation UV. standards: EN 856 4SH, ISO 3862-4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R13, ISO 3862-1 R13, SAE 100R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 350 bar. Operating temperature: od -40°C up to +120°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose o enlarged diameter outer for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 853-2ST. Assembly: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 350 bar to 420 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 2SC, SAE 100R16, SAE 100R2AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 1SC, SAE 100R1 AT. Inner layer: black synthetic rubber. Reinforcement: a single steel braid. Outer layer: black synthetic rubber. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque, the highest quality flexible hose with rubber fluorine, resistant to solvents, fuels, oils, aggressive chemicals, also in conditions elevated temperatures. used for solvents cleaning (laundries chemical, systems recovery solvents), aggressive chemicals, acids and bases, hot oils and fuels. is suitable for pumps peristaltic. resistant to ozone, light solar and conditions atmospheric. opaque black wall hose secures completely substances sensitive on light. process production hose with annealing po vulcanisation removes all residue and ensures minimal degassing, required in use vacuum and space. length full roll hose 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: fluoroelastomer (FKM). Maximum Operating temperature: +204°C. temperature brittleness: -51°C. Hardness: 60° Shore (A). Density: 1.90 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge and conveying most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical, petrochemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard HYTEF, black conductive foil PTFE PTFE - version antistatic HYTEF EL. Material hose Outer layer: black fabric polyethylene coated rubber CSM. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant chemical hose intended for extraction and conveying aggressive chemical vapours solvents, paints, hydrocarbons, chemicals etc. thanks to conductive rubber FKM has properties anti-electrostatic (resistance surface R 6 Ω. very good resistance to oil, substances aromatic, most acids and chemicals. excellent resistance to elevated temperature. resistant to radiation UV and ozone. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. used in industry paint, chemical and paper. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for FKM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyester coated FKM, antistatic, externally black. Reinforcement: outer spiral with sheet and wire steel. Operating temperature: od -25°C up to +210°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and o excellent flexibility hose intended for discharge vapours oils, dusts, light bulk materials. resistant to microorganisms and hydrolysis. meeting requirements FDA and directives European. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled A guard insulating Intended for cooling lines electric in systems automatic welding. resistance electrical 1x10 8 Ω/m. Material layer internal: black rubber SBR/NR. Material layer outer: black rubber SBR/NR. Reinforcement: textile braid. Working pressure: 10 bar. Operating temperature: od -30°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, soft hose fuel of special rubber NBR resistant to ester methyl acids fatty oil rapeseed (RME). Reinforcement synthetic a braid textile. Layer outer with rubber chloroprene CR, antistatic, self-extinguishing, resistant to abrasion, temperature and aging. especially recommended for biofuels, based on esters methyl acids fatty (FAME) e.g. biodiesel B10, B20, B100. resistant to ester methyl acids fatty oil rapeseed (RME). It can be used also for ordinary oil drive. Inner layer: special NBR rubber. Reinforcement: textile braid synthetic. Outer layer: rubber CR. Working pressure: 15 bar. Operating temperature: od -30°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth hose with natural (non-regenerated) polymer fluorine PFA (perfluoroalkoxy), material o properties close for PTFE. hose is characterized excellent resistance chemical, stability temperature dimensions and shape, very smooth, free of micro-pores surface inner and external, high strength pressure and resistance on rupture caused excessive stresses. good transparency hose allows on easy observation level or flow. resistant to radiation UV. intended for low-pressure installation aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Due to excellent properties insulating (strength dielectric 3 ÷ 4 times greater od PTFE) used in industry electronic and semiconductors. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: PFA. hardness Shore (D) 60. Operating temperature: od -200°C up to +260°C. Working pressure: from 7 bar to 19.5 bar - depending on the diameter and wall thickness wall hose.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible, resistant to kinking hose intended for oil hydraulic, liquids based on water and other media. used in systems measurement, control, hydraulic systems brake in bicycles and micro-hydraulics (systems opening roofs automotive). Layer outer with resistant to abrasion polyurethane or with polyamide and micro-perforated, co allows use hose for media gas. hose has resistance to vacuum for 0.93 bar. temperature above 80°C can reduce service life hose. hose DN2 with polyamide (ZC-TEST8-5021PA) passed positively tests pulse 1 million cycles. Inner layer: polyester or polyamide. Reinforcement: single an aramid braid. Outer layer: black polyurethane or polyamide. Working pressure: from 412 bar to 500 bar, depending on the diameter and type hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. sterilization steam (max. +135°C under pressure 3.5 bar through 30 min.). Layer inner Meets the requirements of FDA, USP kl.VI, D.M. 21/03/73 and regulation WE nr 10/2011. Layer outer meets requirements USP kl. VI, FDA and European Pharmacopoeia. hose compliant with EC 1935/2004 and 2023/2006/EC (GMP). free of substances origin animal, phthalates, adipates and materials subject restrictions the directive EC 1907/2006 (REACH). Safety factor 3:1. stated radius bends: refers to pressure static. pressure working (20°C): from 4 bar to 10 bar, depending on the diameter hose. Inner layer: white smooth fluoropolymer PFA. dynamic. Reinforcement: braids polyester, spiral of steel AISI 302. Outer layer: transparent silicone. Operating temperature: od -30°C up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, reinforced a braid polyester hose free of odour and taste, non-toxic, not containing phthalates and BPA (bisphenol A). intended for conveying and dispensing products food under higher pressure. smooth, non-porous surface inner hose eliminates problem settling particles product and growth bacteria. resistant to action alkaline agents cleaning. Meets the requirements of hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, NSF-61, 3-A, Japanese #370/1959 and MHLW370(3-D). compliant with REACH and California Proposition 65 - not contains substances hazardous and banned. possible sterilization oxide ethylene. Po mounting ends o appropriate hygienic the structure possible is cleaning method CIP. length full roll hose 15 m (od diameter internal 38.1 mm - 6 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: PVC (special). Maximum Operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery intended for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic and spiral steel. It has copper wires ensuring electrical continuity between the hose ends – under a condition correct connection for ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North, with success used in use onshore. On special order available also versions o higher pressure working (20 / 27 / 30 / 35 bar), with specified force breaking at tension (maximum for 2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and with approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: from 17 bar to 20 bar - depending on the diameter hose. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for conveying fuels aviation (kerosene aviation, kerosene, e.g. Jet A1) and products industry petrochemical containing up to 50% compounds aromatic, mainly for draining fuels of tanks aircraft, loading and unloading airport tankers and dispensers fuels. Layer outer antistatic, resistant to abrasion, oil and conditions atmospheric. has copper cable ensuring continuity electrical (R ‹ 100 Ω) between fitting hose and discharge charges electrostatic. Compliant with the requirements for aviation fuel hoses (type E/M) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Inner layer: black NBR rubber. Reinforcement: cord synthetic, steel spiral. Outer layer: black synthetic rubber. Working pressure: 20 bar. Vacuum: 0.85 bar. Operating temperature: od -25°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong hose suction-delivery for fuels aviation, intended for filling and emptying tanks aircraft, loading and unloading airport tankers and dispensers fuels. as hose without element metal It can be used for direct filling and emptying tanks aircraft. can be wound on drums. appropriate for fuels aviation for engines turbine (kerosene aviation, kerosene, e.g. Jet A1), gasoline aviation and fuels o content hydrocarbons aromatic up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic and spiral with plastic polymer (PET). Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type F/Ω) API 1529:05, AS 2683, VG 95955, NFPA 407. Other diameters are available on special order and hoses with fluorescent marking visible in night. Inner layer: black NBR rubber. Reinforcement: cord synthetic, spiral PET. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose Hyperline FX SS AS SI WHITE to Light, flexible hose PTFE. Due to its properties recommended is for conveying hot media, applications CIP. hose can be delivered with meter, as and in the molds complete lines. Layer outer in the molds white silicone facilitates maintaining purity. such solution protects also the operator against burn. high resistance layer internal on long-term action steam water. at temperature use above +160°C maximum pressure working given in data technical should reduced o 1% on each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. the given in data value vacuum, defined is for temperatures use up to 150°C. hose standard is in version antistatic, Available also in version with natural PTFE. Hose material: inside smooth, externally Serrated, antistatic PTFE (teflon). Reinforcement: single braid of steel AISI 304 with additional layer protective with white rubber silicone. Working pressure: from 50 bar to 110 bar - depending on the diameter hose. Operating temperature: od -70°C up to +204°C.



















































