0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Version hose PTFE SMOOTHBORE o thickened wall of specially processed PTFE (reduced micro-porosity) for applications with gases high-pressure and other substances penetrating, in double braid steel. at temperature use above +130°C, maximum pressure working given in parameters, should reduced o 0.75% on each 1°C rise temperatures. assembly: use fittings and ferrules series AF-TL... Hose material: smooth PTFE. Reinforcement: double braid of steel 304. Working pressure: from 180 bar to 225 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose CHEMFLUOR TH is flexible a hose PTFE and intended is for high-pressure installation hydraulic, pneumatic and gas. Layer inner made with conductive PTFE prevents accumulation charges electrostatic. Hose material: black, conductive PTFE. Reinforcement: braid of steel AISI 304. Operating temperature: od -50°C up to +200°C. Working pressure: 345 bar. pressure bursting for 20°C: 1100 bar. pressure bursting for 200°C: 820 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changes temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. - as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWDB-10 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. Working pressure: from 40 bar to 350 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. double braid whereas, should use at higher pressures and tam, where occurs (in permissible limits) greater bending or kinking hose. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. - as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-SWDB-08 is: 250 bar – (170°C-130°C) x 0.75 = 250 bar – 30% = 175 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: double braid of steel AISI 304. Working pressure: from 70 bar to 360 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose HYPERLINE V (VISIFLON) has layer inner made with high quality serrated PTFE ensuring exceptional flexibility hose and resistance to vibration. has braid with fibre polypropylene characterized by low mass and high resistance chemical. at temperature use above +80°C maximum pressure working should reduced o 5% on each 1°C rise temperatures. for example at temperature 90ºC maximum pressure working for hose AF-VFPB-19 is: 16 bar – (90°C-80°C) x 5 = 16 bar – 50% = 8 bar. exists possibility order version in black braid polymer (version PBB), o similar characteristics as version PB, for applications tam, where color bright not can be used. available versions: standard (orange) and antistatic (black). antistatic teflon version AS, contains appropriate distributed in PTFE carbon and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. Hose material: spirally Serrated PTFE (teflon). Reinforcement: braid polypropylene. Working pressure: from 12.5 bar to 30 bar - depending on the diameter hose. Operating temperature: od -30°C up to +100°C. resistant to full vacuum for temperatures: +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel AISI 316, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. - as well as for classic installation high-pressure oil hydraulic. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130ºC maximum pressure working given in parameters should reduced o 0.75% on each 1ºC above tej temperatures. for example at temperature 170ºC maximum pressure working for hose AF-SWSB-316-06 is: 240 bar – (170ºC-130ºC) x 0.75 = 240 bar – 30% = 168 bar. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 316. Working pressure: from 80 bar to 240 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 245 bar to 350 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose thermoplastic UHP ANTISTATIC AS8M, type 6

          All products | UHP thermoplastic hoses and fittings
          0 €
          Hose antistatic (R 4 Ω/m) intended for conveying media non-conductive. Inner layer: polyamide. Reinforcement: two aramid braids. Outer layer: blue polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose thermoplastic UHP CHEMICAL, type 5

          All products | UHP thermoplastic hoses and fittings
          0 €
          Hose intended for conveying aggressive substances chemical such as paints, solvents. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose thermoplastic UHP STANDARD, type 1

          All products | UHP thermoplastic hoses and fittings
          0 €
          Hose intended for high-pressure systems hydraulic. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid (UH-OL8M-06 - Reinforcement hose consists of two aramid braids). Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose thermoplastic UHP TWIN, type 2

          All products | UHP thermoplastic hoses and fittings
          0 €
          Hose double consisting with two cores hose type STANDARD. Inner layer: polyester. Reinforcement: an aramid braid + a steel braid. Outer layer: black polyurethane. Working pressure: 700 bar. Operating temperature: od -40°C up to +100°C (for water and liquids based on water max. up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible, antistatic (R 5 Ω/m) hose intended for gas natural (CNG - Compressed Natural Gas). used for filling tanks vehicles driven CNG. standards: ISO 8031, ISO 15500-17. Inner layer: conductive polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +82°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. resistant to salt water sea. on request micro-perforated (for gases and air). Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: an aramid braid + a steel braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for gas natural (CNG - Compressed Natural Gas). used for filling tanks vehicles driven CNG. Available version double with tube venting. standards: ISO 15500-17. Inner layer: black polyamide conductive. Reinforcement: one or two aramid braids + a synthetic braid. Outer layer: red micro-perforated polyurethane. Working pressure: 350 bar. Operating temperature: od -40°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for low-pressure installation industrial. Particularly recommended for autogas (LPG - Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other components of the system. in order to maintaining type approval LPG, should install special fittings bolted made with brass. standards: ECE R67-01. Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -25°C up to +125°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. Available also in version with microperforation (for gases and air). Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose thermoplastic with a steel braid FM040

          All products | Thermoplastic hoses
          0 €
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. is suitable for use in environment high humidity and salty air. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. exceeds requirements SAE 100R8, ISO 3949-R8. Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. resistant to salt water sea. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. resistant to very low temperatures and salt water sea. is suitable for use in environment high humidity and salty air. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the diameter hose. Operating temperature: od -54°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose delivery intended for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). Layer inner with black, smooth blend rubber NBR/PVC. Reinforcement layers strength cord synthetic. It has copper wires ensuring electrical continuity between the hose ends – under a condition correct connection for ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to oil, water sea, abrasion and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North, with success used in use onshore. On special order available also versions o higher pressure working (20 bar, 27 bar), with specified force breaking at tension (2T for 2”, 4T for 3” and 7T for 4”, 5” and 6”) and approval type ABS ( American Bureau of Shipping Type Approval ) for complete line. Inner layer: black NBR rubber/PVC. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 17 bar. Operating temperature: od -20°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light and flexible hose delivery intended for conveying and distribution liquid products industry petrochemical, containing up to 50% hydrocarbons aromatic (e.g. diesel - oil drive, oil heating, gasoline up to 50% aromas). suitable for pumps for refuelling. Layer inner with black, smooth rubber synthetic. Reinforcement cord synthetic. has two copper cable ensuring continuity electrical between fitting hose (resistance R < 100 Ω between fitting) – under a condition correct connection cables for ends. Layer outer with rubber synthetic high quality resistant to oil and conditions atmospheric. hose compliant with requirements standards EN 1360:2013 type 1 type M, for hoses for systems distribution fuels. possibility order length for 120 meters. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +55°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A very strong delivery hose for aviation fuel, intended for direct pressurised refuelling of aircraft. can be also used in operations conveying fuels in airport tankers – dispensers, in cases not demanding large vacuum. can be wound on drums. appropriate for fuels aviation for engines turbine (kerosene aviation, kerosene, e.g. Jet A1), gasoline aviation and fuels o content hydrocarbons aromatic up to 50%. Layer inner with black, smooth, rubber NBR. Reinforcement layers high-strength cord synthetic. Layer outer with black, antistatic rubber synthetic, resistant to abrasion, conditions weather and contact with oil. The antistatic outer layer, in accordance with EN ISO 1825, provides the required low line resistance between the ends (10 3 Ω 6 Ω, ISO 8031). Compliant with the requirements for aviation fuel hoses (type C/Ω) ISO 1825, API 1529:05, AS 2683, VG 95955, NFPA 407. Hoses with fluorescent marking visible at night are available on special order. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber. Working pressure: 20 bar. Operating temperature: od -25°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colorless, crystalline transparent, flexible hose free of odour and taste, non-toxic, not containing phthalates and BPA (bisphenol A). intended for conveying milk and products milk, used in equipment milking. smooth, non-porous surface inner hose eliminates problem settling fat, particles product and growth bacteria. built-in in wall hose blue tape ensures customer o receipt original hose TYGON® S3™ M-34-R, designed specially for transport raw milk. Meets the requirements of hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, 3-A, Japanese MHLW370(3-D). cleaning through flushing acc. to special procedures. compliant with REACH and California Proposition 65 - not contains substances hazardous and banned. length full roll hose 30 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum Operating temperature: up to +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Traditional, known and proven od lat, hose with red rubber natural. easy for installation thanks to its softness (hardness 45° Shore – A), flexible and flexibility. resistant to abrasion, o low permeability for gases and sound resistance to acids and bases. used for liquids and gases for many applications industrial and in laboratories. Meets the requirements of FDA for contact with food. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 25 m. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). Operating temperature: od -30°C up to +70°C (125°C for moist hot). temperature brittleness: -40°C. Hardness: 45° Shore (A). Density: 1.13 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON activator for adhesives

          Adhesives and screw protections | All products
          0 €
          Activator for surface absorbent and for accelerating curing adhesives WE-VA. Packaging - 150 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON aluminum in spray, 400 ml

          All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings
          0 €
          Aluminum pigment in spray o purity > 99.5%. resistance thermal up to +800°C, resistance to abrasion. Packaging - spray 400 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON adhesive VA100

          Adhesives and screw protections | All products
          0 €
          Adhesive cyanoacrylate A universal. is suitable for bonding rubber and plastics and metals with plastics synthetic and rubber. range temperatures: od -10°C for ok. +80°C. Time to reach initial strength: ok 1 min. Packaging - pen type 12 g. or tube 3 g.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON paste assembly Anti-Seize HIGH-TECH, container 450 g

          All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings
          0 €
          Paste assembly Weicon Anti-Seize High Tech ensures protection against corrosion, seizing and „cold welding”, especially on steel stainless. recommended especially for use in extreme conditions e.g.: at high temp., agents aggressive, high pressures, as well as for lubrication loaded bearings and surfaces sliding (only in engines low-speed). eliminates squeals and squeaking, has good properties sealing, allows easy assembly and disassembly components. economical in use (1 kg on ok. 40 ÷ 50 m 2 ) and free od metals toxic, consistency NLGI - Class 1. Operating temperature: od -40°C up to +1400°C. conducts heat. resistant to changes temperatures and loads pressure (230N/mm 2 ). Packaging - container 450 g.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON paste assembly Anti-Seize HIGH-TECH, spray 400 ml

          All products | Cleaning agents, maintenance products, assembly compounds, and protective coatings
          0 €
          Paste assembly Weicon Anti-Seize High Tech ensures protection against corrosion, seizing and „cold welding”, especially on steel stainless. recommended especially for use in extreme conditions e.g.: at high temp., agents aggressive, high pressures, as well as for lubrication loaded bearings and surfaces sliding (only in engines low-speed). eliminates squeals and squeaking, has good properties sealing, allows easy assembly and disassembly components. economical in use (1 kg on ok. 40 ÷ 50 m 2 ) and free od metals toxic, consistency NLGI - Class 1. temperature use: od -40°C up to +1400°C. conducts heat. resistant to changes temperatures and loads pressure (230N/mm 2 ). Packaging - spray 400 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON grease BIO-FLUID, spray 500 ml

          All products | Oils and greases
          0 €
          Grease in spray class medical o high purity and without content resins and acids. intended for cleaning and care surface with clean metal, specially for industry food, pharmaceutical and cosmetic. It can be used everywhere tam, where is possible direct contact with food, m.in. for lubrication guides, hinges, chains, gears, parts pistons, valves and other equipment precision on lines production, bottling, packing articles food, cosmetics and medicines. has certificate NSF H1. liquid taste and odour neutral. protects against corrosion, displaces water, loosens dirt and rust. clear and colorless, o high degree purity. range temperatures od -25°C up to +120°C. Packaging - spray 500 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          WEICON protection for bolts AN302-42

          Adhesives and screw protections | All products
          0 €
          An anaerobic adhesive of medium viscosity for securing screws against unscrewing, average strong, disassembly at use standard tools. color: blue. Maximum thread diameter: for M36. Working temperature range: od -60°C up to +150°C. Breakaway torque for the screw: 14-18 Nm. Time to reach initial strength: 10-20 min (depending on material). Time to reach full strength: po 3-6 h (depending on material). Packaging - pen type 20 ml or 50 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Multifunction Gun AKBO, equipped in special quick coupling on outlet, without cover in the molds bail. using this gun can: apply foam on cleaned surfaces, rinse water adjustable a stream with gun, spray e.g. agent disinfecting (at use appropriate fittings). Note: quick coupling gun and nozzles not are interchangeable with other systems!. Material: brass. trigger of steel stainless. A guard with blue rubber EPDM. sealing: EPDM. Connection (inlet): 1/2" BSP female. maximum Working pressure: 24 bar. Maximum Operating temperature: +95°C.
        Go to Top