0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for coolant, system 1/2″, JETON

          Air and water hoses | All products
          0 €
          Hose for coolant in system 1/2" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x13.5 cm or 100 cm. Material: acetal. Working pressure: up to 2 bar. maximum Flow rate: 1700 l/h. Operating temperature: up to +65°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - Tee "T" high-pressure type A310 with thread external NPT (sealing on the thread) and 2 x thread internal NPT (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fittings with thread internal BSP and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps for steam type BOSS SBC. complete A fitting consists with three parts – fittings ball GB with spigot („tail”) for hose, a nut wing B of special thread internal (NPS) and special adapter GFB with thread external (NPS) such as in nut and thread internal compliant with size fittings. Adapter GFB has tapered an insert polymer or copper, cooperating with fitting ball. creates to tight, resistant to action steam and high temperatures connection, which is at the same time easy for unscrewing and screwing without use special tools, using a nut wing. Material: steel/cast iron galvanized. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN series 525 (NORDIC RANGE) with a shut-off valve and an eliminator and thread internal BSP. It is intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: steel coated zinc-nickel. Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. sealing: NBR. Operating temperature: od -30°C up to +100°C. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for coolant, system 3/8″, JETON

          Air and water hoses | All products
          0 €
          Hose for coolant in system 3/8" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x14.5 cm or 100 cm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1500 l/h. Operating temperature: up to +65°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DYROS series 30 with thread external with valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: brass. sealing valve: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A101T with threads external BSPT (sealing on the thread). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket DN 9 quick coupling with "tail" for hose PUSH-ON, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Clamp SBC (Steam Bolt Clamp) with cast iron galvanized, steel stainless (cast steel) AISI 316 and brass, bolted screws, with claws for lock (flange) ends. intended primarily for mounting ends for steam type GF and MS BOSS in hoses rubber for steam water. a clamp should precisely select both for size (diameter internal) hose, as and actual diameter outer hose, a in period operation should je periodically check and optionally tighten. depending on size, clamp differ od each other shape, amount claws and amount bolts mounting. Material: cast iron galvanized, steel stainless AISI 316, brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Leak-free plug quick coupling type "flat-face" intended mainly for machine construction, in which available large strokes pressure. version with an eliminator pressure static. quick coupling can be operated one hand. depending on use should select appropriate Material seal. interchangeable with quick coupling ISO-F other manufacturers. standard: ISO 16028. Application: hydraulics power (oil hydraulic), industrial. Working pressure: up to 400 bar. Material: steel with coating zinc - nickel. sealing: NBR (od -25°C up to +100°C). maximum pressure static at connecting quick couplings with a plug with an eliminator pressure: od side socket 0 bar, od side plug 250 bar. Flow rate has been stated at Δp = 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for coolant, system 1/4″, LOC-LINE®

          Air and water hoses | All products
          0 €
          Hose for coolant in system 1/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x145 mm, 100 mm, 200 mm, 300 mm, 400 mm, 500 mm, 600 mm, 700 mm, 800 mm 900 mm and 1000 mm. Material: acetal. Working pressure: up to 3 bar. maximum Flow rate: 1136 l/h. Operating temperature: up to +76°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic high-pressure adapter, type A101 with threads external BSPT (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting with thread external BSPT, type SSF (version economical). Intended primarily for hoses rubber for steam water, with serrated tail and with a lock, for mounting in hose at means clamps shell for steam (type Heavy Duty). made in accordance with EN 14423 (DIN 2826). Material: steel AISI 304, brass. Working pressure: 18 bar (+210°C) – steam saturated, other use: selection in contact with Tubes International.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR, type ZBW110, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling bolted - plug, type HS with thread internal BSP. allowed is tightening quick coupling under pressure max. 50 bar. Application: hydraulics power (oil hydraulic). Material: steel galvanized. sealing socket: NBR (temperature use od -25°C up to +100°C). Working pressure: up to 450 bar (depending on size quick coupling). Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for coolant HYDRAFIX FR211

          Air and water hoses | All products
          0 €
          Resistant to oils, greases and hot chips hose intended for low-pressure feeding liquid or gas coolant at treatment metals. has tzw. memory shape, co allows on precision directing a stream substances cooling. supplied in the molds ready lines with connection with thread external BSP ending metric thread external. Material: black PVC. Reinforcement: steel A guard leading, Diameter DN 10 has additional spiral cover with nickel-plated sheet steel. Working pressure: 4 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug DN 9 quick coupling with thread external, series TST 9, brass

          All products | Quick couplings for injection molds
          0 €
          Plug DN 9 quick coupling with thread external BSP, BSPT, NPT and metric, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 15 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body plug, valve), steel stainless (spring).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - cap high-pressure JIS type A407 with thread internal BSP (sealing inverted 60° cone) - TOYOTA. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 6 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thick, strong and flexible hose delivery of reinforcement steel and with layer external resistant on oil, for conducting steam saturated and superheated. Layer inner o sound resistance to high temperature and steam saturated. It can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to oil, temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial, in particular tam, where required is resistance layer outer on oils, greases and other products petrochemical. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. hose VAPOFER EN ISO 6134 is version antistatic (R ≤10 6 Ω), compliant with the standard EN ISO 6134/05 type 2 class B (Ω). Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black synthetic rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick coupling bolted - socket, type HS with thread internal BSP. has additional O-ring on body socket, which prevents unscrewing quick coupling in situation pressure pulsating and vibration. allowed is tightening quick coupling under pressure static max. 50 bar. Application: hydraulics power (oil hydraulic). Material: steel galvanized. sealing socket: NBR (temperature use od -25°C up to +100°C). Working pressure: up to 450 bar (depending on size quick coupling). Safety factor 4:1. Flow rate has been stated for a drop pressure 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule ZF12T for hoses hydraulic rubber type 1SN(R1AT), 2SN(R2AT) or 2SC. assembly - without skiving. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Diameter D1 - Diameter outer. Material: steel carbon, zinc-nickel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose with base magnetic and valve for supply coolant - system 1/4". parts components: 20 segments (L=300 mm), nozzle flat 1", valve with thread external 1/4" BSPT and base magnetic with "tail" for hose 1/4" (size thread fittings 1/8" NPT). Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter type A301 with threads external NPT (sealing on the thread). Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 6 with fitting for hose without valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality A clamp shell Heavy Duty Intended primarily for hoses rubber for steam water for mounting ends for steam type VSS, MSS, FSS, SSF. made (sizes 1/2” for 2”) according to EN 14423 (DIN 2826). screws and a nut of galvanized steel (for clamps with brass), of steel stainless (for clamps of steel stainless).a clamp should select for diameter internal hose and for wall thickness wall hose acc. to size nominal clamp, tak, to Diameter outer mounted hose fit in given for clamp the scope. initial tightening clamp requires use long bolts auxiliary. Material: brass, steel AISI 316. Operating temperature: for + 230°C. Working pressure: 18 bar (+ 210°C) – steam saturated, other use: selection in contact with TUBES INTERNATIONAL®.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule ZF12T for hoses hydraulic rubber type 1SN(R1AT) or 2SN(R2AT). assembly - without skiving. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for coolant, system 3/4″, JETON

          Air and water hoses | All products
          0 €
          Hose for coolant in system 3/4" made with resistant to corrosion, solvents, oils and greases acetal, ensuring rigidity and resilient lines. intended for low-pressure conveying air, water, oils and other substances used in processes cooling and treatment metals. resistant to abrasion and vibration, ensures 100% stability position and not causes damage tools cutting. very easy in expansion modular The design. available length: 2x15 cm or 100 cm. Material: acetal. Working pressure: for 1.4 bar. maximum Flow rate: 1900 l/h. Operating temperature: up to +65°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - A cross high-pressure type A124 with thread internal BSP (sealing on the thread). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 6 with thread external and a shut-off valve. Available with thread metric or BSP. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fittings with thread external tapered BSPT and NPT for hoses rubber for steam water, with serrated tail for hose, with a lock ensure safe connection hose with installations. mounted for hose with use clamp for steam SBC type BOSS. sealing on the thread tapered BSPT or NPT using packing (e.g. tape PTFE). depending on size and kinds material, fittings can differ shape tail. Material: steel galvanized, cast iron galvanized, steel stainless AISI 316, brass. Working pressure: 18 bar (+210°C) - steam saturated. Operating temperature: up to +230°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR 90°, type ZBW210, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Leak-free plug quick coupling type "flat-face" intended mainly for machine construction, in which available large strokes pressure. plugs available also in version with an eliminator pressure static. quick coupling can be operated one hand. depending on use should select appropriate Material seal. interchangeable with quick coupling ISO-F other manufacturers. standard: ISO 16028, except for size DN5. Application: hydraulics power (oil hydraulic), industrial. Material: steel with coating zinc - nickel. Working pressure: up to 500 bar. sealing: NBR (od -25°C up to +100°C), Viton (od -15°C up to +200°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter JIS type A404 with thread internal BSP (sealing inverted 60° cone) - TOYOTA and with thread external BSPT (sealing on the thread). used is in installations hydraulics power for connecting hydraulic lines flexible and pipes with other element installation (pump, valves, quick coupling etc.). allows reduction kinds and size, compliant with connections joined element. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DYROS series 30 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality fittings with thread internal BSP. intended for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (type Heavy Duty). sealing ends using special the gasket fiber (Frenzelit®), flat for version of galvanized steel and brass, and PTFE for steel stainless. Material: steel galvanized, steel AISI 316, brass. Operating temperature: up to +230°C. Working pressure: 18 bar (+210°C) - steam saturated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR, type ZBW110, steel AISI 316L

          All products | Fittings for high-pressure hoses
          0 €
          A fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female BSP thread with a nut, cone sealing 60° (DKR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling TEMA STANDARD (NORDIC RANGE) without valve with thread internal BSP. intended for heavy conditions use. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases and chemicals). Material: brass chrome-plated for size 1", steel galvanized above 1". Working pressure: up to 450 bar (depending on the diameter). Safety factor 4:1. Flow rate has been stated at Δp = 3 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - cap high-pressure type A314 with thread internal NPT (sealing on the thread). Material: steel carbon, galvanized.
        Go to Top