- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling 90° DYROS series 90 with fitting for hose and a shut-off valve. intended for liquids cooling molds in processing plastics, installation compressed air, cylinders with technical gases and other fields of technology. Material: all element made are with brass, whereas rings supporting, spring and balls with treated steel stainless. sealing: Viton. Working pressure: 15 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting FSS with a flange fixed, for hoses rubber for steam water, with serrated tail for hose, with a lock – for mounting in hose at means clamps shell for steam (EN 14423, DIN 2826, sizes 1/2” for 2”). Flange according to European standards (EN 10092-1) PN40 and PN16 and according to American ASA (ASME) standards 150 PSI and 300 PSI. Material: steel galvanized. Working pressure: 18 bar (+210°C) for steam saturated and in accordance with pressure working given class flange in tej temperature; for other applications in accordance with pressure working for given class flange (e.g. PN40) - selection in contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug quick coupling HOLMBURY (NORDIC INTERCHANGE) with a shut-off valve and thread internal BSP, has built-in eliminator pressure, facilitating achieving connections, in case when in system found high pressure residual. quick coupling intended are for heavy conditions use. use: general industrial, hydraulics power (oil hydraulic). Material: steel with coating zinc - nickel. Working pressure: up to 350 bar (depending on the diameter). Safety factor 4:1. sealing: NBR rubber. Operating temperature: od -25°C up to +100°C. Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure adapter, type A302, with threads internal NPT (sealing on the thread). Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° round for hoses for coolant JETON - system 1/4". Available in sizes 1/4", 3/8" and 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° round for hoses for coolant LOC-LINE® - system 1/2". Available in sizes 1/4", 3/8" and 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° round for hoses for coolant JETON - system 1/4". Available in sizes 1/16", 1/8" and 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° round for hoses for coolant LOC-LINE® - system 1/4". Available in sizes 1/16", 1/8" and 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° flat with holes for hoses for coolant JETON - system 1/2". 8 holes o diameter 4.2 mm. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° flat with holes for hoses for coolant LOC-LINE® - system 1/2". 8 holes o diameter 4.3 mm. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° flat with holes for hoses for coolant JETON - system 1/4". 6 holes o diameter 2.3 mm. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle 90° flat with holes for hoses for coolant LOC-LINE® - system 1/4". 6 holes o diameter 2.5 mm. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle side for coolant JETON - system 1/2". allows construction e.g. set ring. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle side for coolant JETON - system 1/4". allows construction e.g. set ring. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle side for coolant LOC-LINE® - system 1/4". allows construction e.g. set ring. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant JETON - system 1/2". Available in sizes 1/4", 3/8" and 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant LOC-LINE® - system 1/2". Available in sizes 1/4", 3/8" and 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant JETON - system 1/4". Available in sizes 1/16", 1/8" and 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant LOC-LINE® - system 1/4". Available in sizes 1/16", 1/8" and 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant JETON - system 3/4". Available in sizes 5/8" and 3/4". Material: acetal. Working pressure: for 1.4 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant LOC-LINE® - system 3/4". Available in sizes 3/4" and 5/8". Material: acetal. Working pressure: for 1.4 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle round for hoses for coolant JETON - system 3/8". Available in sizes 1/4", 3/8" and 1/2". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for hoses for coolant JETON - system 1/2". Available in size 1.1/2", 1.3/4" and 2.1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for coolant LOC-LINE® - system 1/2". Available in size 1.1/4" and 2.1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for hoses for coolant JETON - system 1/4". Available in size 1". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for coolant LOC-LINE® - system 1/4". Available in size 1". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for hoses for coolant JETON - system 3/4". Available in size 3". Material: acetal. Working pressure: for 1.4 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for coolant LOC-LINE® - system 3/4". Available in size 3". Material: acetal. Working pressure: for 1.4 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat wide for hoses for coolant JETON - system 3/8". Available in size 1.1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat narrow for hoses for coolant JETON - system 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat narrow with holes (5 or 7 holes) o diameter Ø 3.2 mm or Ø 2 mm for hoses for coolant LOC-LINE® - system 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat narrow with holes (5 or 7 holes) o diameter Ø 1.5 mm or Ø 1 mm for hoses for coolant LOC-LINE® - system 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat with adjustable head with 20 holes o diameter Ø 1.8 mm for hoses for coolant JETON - system 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat with adjustable head with holes (20 holes) o diameter Ø 1.9 mm for hoses for coolant LOC-LINE® - system 1/2". Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat with adjustable head with 16 holes o diameter Ø 1 mm or Ø 1.5 mm for hoses for coolant JETON - system 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle flat with adjustable head with holes (16 or 20 holes) o diameter Ø 1 mm, Ø 1.5 mm or Ø 1.9 mm for hoses for coolant LOC-LINE® - system 1/4". Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, o various lengths, with mounted fitting, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. hose is used for emptying septic tanks and portable toilets, in construction, facilities tourist, in marinas and on airports. available length: od 10 m for 25 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar (for diameter 51mm ÷ 76 mm); 0.85 bar (for diameter 102 mm). Operating temperature: od -40°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction supplied in the molds ready line, with mounted fitting, a clamp and a cable, intended for sewage and water. externally Serrated, almost smooth in center. special profile makes, that hose is resistant to vacuum and creasing, (returns for its shape). as hose with polyethylene has very good resistance chemical and resistance to corrosion biological (rotting, rotting). is flexible in low temperatures. short sections hose o length 1 m with fitting used are as hoses cover, rested on edge hole channel, inside which introduced is for channel pressure hose cleaning or line inspection with camera. mounted on the tip clamp with attached a cable o length 7.5 m allows on maintaining appropriate position hose cover. length: 1 m. Hose material: yellow profile polyethylene (PE). Reinforcement: black profile polyethylene (PE). Vacuum: 0.95 bar. Operating temperature: od -40°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket 90° DN 9 quick coupling with fitting for hose, with valve or without valve, used widely in industry for cooling moulds injection and casting parts with plastics, aluminum, brass and alloys zinc. can be used for water in cleaning machines, for hot oil, steam water. Diameter bore: 9 mm. Working pressure: 25 bar. Operating temperature: od -20°C up to +200°C (Viton). Material: brass (body socket, Connection, sleeve valve), steel stainless (spring, ring, balls).



















































