Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong and flexible, multi-braid line, used mainly for high-pressure cleaning and cutting water, hydroforming, hydraulics, injection chemicals and lubrication under high pressure. line is tested pressure and supplied of appropriate certificate. meets standard EN 1829-2. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material fittings and ferrule: steel stainless (A fitting), steel carbon, galvanized (sleeve). Working pressure: 2500 bar. Operating temperature: od -30°C up to +70°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong and flexible, multi-braid line, used mainly for high-pressure cleaning and cutting water, hydroforming, hydraulics, injection chemicals and lubrication under high pressure. line is tested pressure and supplied of appropriate certificate. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material fittings and ferrule: steel stainless (A fitting), steel carbon, galvanized (sleeve). Working pressure: 2800 bar. Operating temperature: od -30°C up to +70°C (+60° for hose SS-NW-05-6H).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, light and flexible, two-braid line, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, exchangers heat, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyoxymethylene. Outer layer: polyamide. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1200 bar, depending on the diameter. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, light and flexible, two-braid line, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, exchangers heat, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyoxymethylene. Outer layer: polyamide. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1000 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP thread, sealing flat - requires use additional the gasket flat (AGR-F). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a male BSP thread, cone sealing 60° (AGR). Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOL), angled 90°, series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with a female metric thread with a nut, O-ring sealing on a 24° cone (DKOS), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with tube metric, sealing a ring cutting (BEL), angled 45° series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with tube metric, sealing a ring cutting (BEL), angled 90° series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with tube metric, sealing a ring cutting (BEL), series light. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with tube metric, sealing a ring cutting (BES), angled 45° series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting hydraulic standard (type Z - of standard "tail" hydraulic for hose), with tube metric, sealing a ring cutting (BES), angled 90° series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGasket flat for flanges SAE. Material: polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN 115 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. optionally socket can be equipped in ring securing against accidental disconnection. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1000 bar (coupling connected). pressure bursting: 2600 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipe of steel improved drawn on cold. given pressure working is pressure theoretical acc. to DIN 2413-93. Material: E235+N according with EN 10305-4. St (HPC1). 37.4 NBK acc. to DIN 1630 (HPZ1). coating tubes galvanized free od Cr VI. length standard tubes (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA rail Intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 301 using a nut ADES or ADESD. shipping in sections 2 m. Material: steel carbon or steel AISI 304.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve crimping IL4 for hoses hydraulic rubber with a braid spiral type 4SH, R13 and R15. Use only with fitting hydraulic INTERLOCK od this the same supplier. assembly - skiving external and internal. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSleeve crimping NON SKIVE for hoses hydraulic rubber with a braid spiral type 4SP, 4SH, R13 and R15. Use only with appropriate fitting hydraulic NON SKIVE od this the same supplier. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with increased service life relative to the standard. Confirmed hose service life of 400.000 pulse cycles. standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality two-way ball valve type BKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. pressure working dependent od material seal valve. Material: steel (body, ball, stem). seal: PA, PVDF or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (PA); od -40°C up to +150°C (PVDF); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C(FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VMP limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in Connection pressure-gauge (1/4" BSP female) and holes assembly. Material body: steel galvanized. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 300 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. standard pressure opening: 0.5 bar (available also 3, 6 and 10 bar). permissible direction flow A → A1. Material: steel galvanized (body), hardened steel (stem). sealing: metal-metal. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket bolted PVS quick coupling hydraulic intended for installation o very high pressures, in which available large loads mechanical. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. can be joined / disconnected when in system found pressure residual. caps should order separately. Material: steel carbon. sealing: NBR. Flow rate: 1/4" - 16.4 l/min; (Δp = 4 bar), 3/8" - 21.3 l/min; (Δp=4 bar). Working pressure: 700 bar. pressure bursting: 1/4" - 2100 bar (coupling connected), 3/8" - 1850 bar (coupling connected), 1/4" - 1800 bar (socket disconnected), 3/8" - 1850 bar (socket disconnected). Operating temperature: od -25°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting 90° NON SKIVE with a female metric thread, with seal on cone 24°, O-ring (DKOS 90), series heavy, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight INTERLOCK with a female metric thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: green polypropylene. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -30°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeamless pipe precision metric with austenitic steel stainless cold-rolled. given pressure working is pressure theoretical acc. to EN 13480-3. compliant of standards: EN 10216-5 TC1, ASTM A213-AW, ASTM A269, PED 97/23/EC, NACE MR0175/ISO 15156. Material: EN 1.4435, ASTM TP 316L. dimensions and tolerances acc. to EN 10305-01. length standard tubes (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 2SN, ISO 1436-1 2SN/R2AT, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValves VODE used in systems hydraulic as element controlling and locking movement actuator double-acting operation. enable gentle descent actuator under load. value pressure opening sets using bolts (setting a wrench Allen, lock a lock nut). value setting must be o 30% greater, than value pressure resulting with loads receiver. standard pressure opening valves check is 0.5 bar. valves equipped are in holes assembly. Material: steel galvanized (body), steel galvanized (valve). sealing: NBR. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type RKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. Material: steel stainless AISI 316Ti (body, ball, stem). seal: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C(FKM).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve FPM limits maximum pressure in system. allows free Flow rate liquids hydraulic between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. maximum value pressure sets using screws (setting a wrench Allen, lock a lock nut). should pay attention particularly attention, to not set value pressure larger than 250 bar (max. pressure use for body valve). Material: aluminum (body), steel galvanized (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for high-pressure installation hydraulic and industrial. closes Flow rate medium in one direction and opens free Flow rate medium in direction opposite. standard pressure opening: 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow A → A1. Material: steel AISI 316 (body), steel AISI 316 (stem). sealing: FKM. Operating temperature: od -10°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF intended for high-pressure installation hydraulic. variant normally closed (NC). valve equipped is in holes assembly (shown on photo). connector for order separately. Material: aluminum (body), steel galvanized (valve). sealing: NBR. Protection degree: IP65. Working pressure: 250 bar. Operating temperature: od -30°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange straight INTERLOCK SAE 6000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a female BSP thread, with seal on cone 60° with an O-ring (DKOR), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: self-extinguishing polyamide. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, flexible, reinforced four layers with wire steel line high-pressure, used in equipment for cutting and cleaning water. use hoses includes cleaning installation chemical and power, cleaning and cutting the structure concrete, surface road, cleaning surface steel. line is tested pressure and supplied of appropriate certificate. Inner layer: polyamide. Reinforcement: two compact and two loose layer wire steel. Outer layer: black polyurethane. Material fittings and ferrule: steel carbon, galvanized. Working pressure: up to 1040 bar. Operating temperature: od -30°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 400.000 pulse cycles. standards: EN 857 2SC, SAE 100R16, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
