- Home
- Hydraulics and high pressure
- Hydraulic rubber hoses
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with increased service life relative to the standard. Confirmed hose service life of 400.000 pulse cycles. standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 2SN, ISO 1436-1 2SN/R2AT, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 400.000 pulse cycles. standards: EN 857 2SC, SAE 100R16, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with increased service life relative to the standard. Confirmed hose service life of 300.000 pulse cycles. standards: EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. used for installation o lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 250 bar to 420 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black synthetic rubber. Reinforcement: four layer spiral wire steel. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 445 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. standards: exceeds EN 853 1SN, ISO 1436-1SN, SAE 100R1-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 40 bar to 225 bar depending on the diameter hose. Operating temperature: od -50°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Pressure working: from 180 bar to 460 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C (momentarily +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. Confirmed hose service life of 300.000 pulse cycles. standards: exceeds EN 853 1SN, ISO 1436-1SN, SAE 100R1S-AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 40 bar to 225 bar depending on the diameter hose. Operating temperature: od -40°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 1SN, ISO 1436-1SN/R1AT, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 2SC, EN45545-2. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 90 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 853-2SN. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Working pressure: from 90 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). Confirmed hose service life of 300.000 pulse cycles. standards: EN 857 1SC, ISO 11237-1. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 90 bar to 225 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 2SN, SAE100 R2AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a double steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 80 bar to 415 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 856 4SH. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 250 bar to 420 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. Confirmed hose service life of 400.000 pulse cycles. standards: exceeds EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 80 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose, for installation o lower pressures. It is characterised by high flexibility and lightness. meets standards: EN 854 2TE and EN45545-2. Inner layer: black, flame-retardant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, flame-retardant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose with a reduced outer diameter and mass and increased flexibility (COMPACT type). intended for most demanding applications. excellent resistance to pressure pulsating. thanks to special blend rubber Layer outer antistatic, highly flame-retardant (exceeds requirements MSHA), highly resistant to ozone, conditions weather, abrasion and radiation UV. has certificate MSHA. standards: EN 857-2SC, SAE 100R 16S, ISO 11237-1. Assembly: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R15, ISO 3862-1 R15, SAE 100 R15. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 420 bar. Operating temperature: od -40°C up to +121°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose multi-braid for high pressure. hose o increased flexibility (radius bending 50% better in ratio for standard standards). service life hose confirmed test 500.000 cycles pulses. Flame-retardant outer layer (MSHA). used in installations hydraulics power large machine construction and all kinds equipment with drive hydraulic. standards: EN 856 R15, SAE 100 R15, ISO 3862-1 R15. Inner layer: black synthetic rubber. Reinforcement: four layer spiral wire steel. Outer layer: black synthetic rubber. Working pressure: 420 bar. Operating temperature: od -40°C up to +120°C (oil hydraulic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. used for installation o lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose multi-braid for high, constant for all diameters pressure. hose o increased flexibility (radius bending 50% better in ratio for standard standards). service life hose confirmed test 500.000 cycles pulses. Flame-retardant outer layer (MSHA). used in installations hydraulics power large machine construction and all kinds equipment with drive hydraulic. standards: ISO 18752 CLASS 350 CC. Inner layer: black synthetic rubber. Reinforcement: four layer spiral wire steel. Outer layer: black synthetic rubber. Working pressure: 350 bar. Operating temperature: od -40°C up to +120°C (oil hydraulic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o increased flexibility (radius bending 50% better in ratio for standard standards). Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R15, SAE 100 R15, ISO 3862-1 R15. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 and DN 38). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 420 bar. Operating temperature: od -40°C up to +121°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. used for installation o lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 3TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: double textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 55 bar to 145 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 853 1SN, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +120°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 1SC, EN45545-2. Inner layer: black synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, flame-retardant synthetic rubber. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o increased flexibility (radius bending 50% better in ratio for standard standards). Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R13, SAE 100 R13, ISO 3862-1 R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 38). Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 350 bar to 380 bar depending on the diameter hose. Operating temperature: od -40°C up to +121°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA hydraulic hose with an extended working-temperature range compared to standard hydraulic hoses. standards: EN 853 2SN, ISO 1436-2SN, SAE 100R2S-AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: blue, oil-resistant synthetic rubber resistant to ozone and aging. Working pressure: from 78 bar to 400 bar depending on the diameter hose. Operating temperature: od -50°C up to +135°C (momentarily +150°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. standards: EN 856 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 280 bar to 450 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose intended for most demanding applications. excellent resistance to pressure pulsating. thanks to special blend rubber Layer outer antistatic, highly flame-retardant, highly resistant to ozone, conditions weather, abrasion and radiation UV. standards: EN 856 4SH, ISO 3862-4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 R13, ISO 3862-1 R13, SAE 100R13. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire (six for DN 32 ÷ DN 51). Outer layer: black, oil-resistant synthetic rubber. Working pressure: 350 bar. Operating temperature: od -40°C up to +120°C (momentarily +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose o enlarged diameter outer for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 853-2ST. Assembly: contact TUBES INTERNATIONAL®. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 350 bar to 420 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 2SC, SAE 100R16, SAE 100R2AT. Inner layer: black synthetic rubber. Reinforcement: a double steel braid. Outer layer: black synthetic rubber. Working pressure: from 165 bar to 400 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose o reduced diameter outer and weight and increased flexibility. meets standards: EN 857 1SC, SAE 100R1 AT. Inner layer: black synthetic rubber. Reinforcement: a single steel braid. Outer layer: black synthetic rubber. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA compact medium-pressure hydraulic hose compliant with DIN EN 857 1SC, SAE 100R17 and ISO 11237 standards. Reinforced with a single high-strength steel braid, it provides high resistance to working pressure, excellent flexibility and a small bend radius. The outer layer of the hose is resistant to oil, weather conditions and abrasion. The hose is used in construction and agricultural machinery, handling equipment, lifts, forklifts, hydraulic presses and industrial hydraulic systems requiring high flexibility combined with high pressure resistance. Inner layer: synthetic rubber resistant to hydraulic oils. Reinforcement: single steel braid. Outer layer: synthetic rubber resistant to abrasion, oils and weather conditions. Working pressure: from 210 bar to 260 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (occasionally +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHydraulic hose, smooth on the outside, with double steel braid reinforcement, with a reduced outer diameter and weight and increased flexibility (COMPACT type). Characterised by a higher working pressure compared to standard 2SC type hoses. Proven hose service life of 1,000,000 impulse cycles. Flame-retardant outer layer (MSHA), highly resistant to ozone, weather conditions, abrasion and UV radiation. Designed for high-pressure hydraulic installations. Meets standards: EN 857-2SC, SAE 100R16, SAE 100R19, ISO 11237, ISO 18752 TYPE BC. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 450 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (momentarily up to +120°C), for water up to +70°C, for air up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally flexible four-braid hydraulic hose for high pressure. Used in power hydraulics installations of large construction machinery and all kinds of hydraulically driven equipment. Standards: EN 856-4SH, ISO 3862, SAE 100 R13, SAE 100 R15. Inner layer: oil-resistant black synthetic rubber. Reinforcement: four spiral layers of high-tensile steel wire. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 250 bar to 420 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible four-spiral hydraulic hose, designed for operation under high-pressure conditions. Intended for power hydraulics installations in heavy construction machinery and in equipment and machines fitted with a hydraulic drive. Standards: EN 856-4SP, ISO 3862. Inner layer: oil-resistant black synthetic rubber. Reinforcement: four spiral layers of high-tensile steel wire. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 175 bar to 450 bar, (depending on hose diameter). Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).



















































