0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -60 — -10

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 60 — 200

      Material
      Vacuum resistance
      Standard length [m]
        • Tee for HP connections up to 4140 bar, steel AISI 316
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee for HP connections up to 4140 bar, steel AISI 316

          All products | UHP adapters and accessories
          0 €
          Tee, for high-pressure connections in the HP version, suitable for operation under working pressure up to 4140 bar. The set includes three nuts and three back-up rings. Designed for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 4140 bar.
        • Tee for MP connections up to 1380 bar, steel AISI 316
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee for MP connections up to 1380 bar, steel AISI 316

          All products | UHP adapters and accessories
          0 €
          A tee for high-pressure connections in the MP version, designed to operate at working pressures up to 1380 bar. The set includes three nuts and three back-up rings. Intended for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 1380 bar.
        • Compact hydraulic hose with single steel wire braid EN 857 BALPACK 1SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A compact medium-pressure hydraulic hose compliant with DIN EN 857 1SC, SAE 100R17 and ISO 11237 standards. Reinforced with a single high-strength steel braid, it provides high resistance to working pressure, excellent flexibility and a small bend radius. The outer layer of the hose is resistant to oil, weather conditions and abrasion. The hose is used in construction and agricultural machinery, handling equipment, lifts, forklifts, hydraulic presses and industrial hydraulic systems requiring high flexibility combined with high pressure resistance. Inner layer: synthetic rubber resistant to hydraulic oils. Reinforcement: single steel braid. Outer layer: synthetic rubber resistant to abrasion, oils and weather conditions. Working pressure: from 210 bar to 260 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (occasionally +125°C). For water and air, maximum operating temperature +70°C. For air above 17 bar, micro-perforation of the outer layer is required.
        • Hydraulic hose with long service life for very high pressure EN 857 2SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose, smooth on the outside, with double steel braid reinforcement, with a reduced outer diameter and weight and increased flexibility (COMPACT type). Characterised by a higher working pressure compared to standard 2SC type hoses. Proven hose service life of 1,000,000 impulse cycles. Flame-retardant outer layer (MSHA), highly resistant to ozone, weather conditions, abrasion and UV radiation. Designed for high-pressure hydraulic installations. Meets standards: EN 857-2SC, SAE 100R16, SAE 100R19, ISO 11237, ISO 18752 TYPE BC. Inner layer: black synthetic rubber. Reinforcement: double steel braid. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 450 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (momentarily up to +120°C), for water up to +70°C, for air up to +60°C.
        • Electrically non-conductive hydraulic thermoplastic hose OL 8 NON CONDUCTIVE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible, electrically non-conductive thermoplastic hose OL 8 NON CONDUCTIVE. Designed for hydraulic systems with oil, fuels and water-based fluids. Recommended for applications near transformers, medium- and high-voltage electrical installations and in insulated aerial platforms where insulating properties are required. The non-microperforated outer layer is resistant to hydrolysis and microorganisms, allowing operation in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, ANSI A92.2 (standard for aerial platforms - USA), MSHA. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: orange polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water up to +70°C).
        • High-pressure hydraulic hose POWERSPIR BESTFLEX 4SH EN 856 4 SH / ISO 3862
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Exceptionally flexible four-braid hydraulic hose for high pressure. Used in power hydraulics installations of large construction machinery and all kinds of hydraulically driven equipment. Standards: EN 856-4SH, ISO 3862, SAE 100 R13, SAE 100 R15. Inner layer: oil-resistant black synthetic rubber. Reinforcement: four spiral layers of high-tensile steel wire. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 250 bar to 420 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
        • Highly flexible high-pressure hydraulic hose BALMASTER BESTFLEX 4SP EN 856 4 SP / ISO 3862
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible four-spiral hydraulic hose, designed for operation under high-pressure conditions. Intended for power hydraulics installations in heavy construction machinery and in equipment and machines fitted with a hydraulic drive. Standards: EN 856-4SP, ISO 3862. Inner layer: oil-resistant black synthetic rubber. Reinforcement: four spiral layers of high-tensile steel wire. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 175 bar to 450 bar, (depending on hose diameter). Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
        • Highly flexible high-pressure hydraulic hose, ADVANSTAR- 4SH
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A multi-braid hydraulic hose for high pressure. A hose with increased flexibility compared to the standard requirement. Flame-retardant outer layer (MSHA). Used in power hydraulics installations of large construction machines and all types of hydraulically driven equipment. Standards: EN 856 4SH, ISO 3862-1 4SH. Inner layer: black synthetic rubber. Reinforcement: four spiral layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 325 bar to 420 bar - depending on hose diameter. Operating temperature: from -40°C to +120°C (hydraulic oil).
        • Highly flexible high-pressure hydraulic hose, ADVANSTAR- 4SP
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Multi-braid high-pressure hydraulic hose. A hose with increased flexibility compared to the standard requirement. Flame-retardant outer layer (MSHA). Used in power hydraulics installations of large construction machinery and all types of hydraulically driven equipment. Standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black synthetic rubber. Reinforcement: four spiral layers of steel wire. Outer layer: black synthetic rubber. Working pressure: from 325 bar to 415 bar - depending on hose diameter. Operating temperature: from -40°C to +120°C (hydraulic oil).
        • Hydraulic hose with double steel wire braid EN 853 FORZA 2SN
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose with double steel wire braid. Designed for medium- and high-pressure hydraulic systems. Commonly used in hydraulic power systems of agricultural equipment, small working machines, machine tools and hydraulically driven equipment. Standards: EN 853-2SN, ISO 1436, SAE 100 R2AT. Inner layer: black synthetic rubber. Reinforcement: double steel wire braid. Outer layer: black synthetic rubber. Working pressure: from 55 bar to 415 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (hydraulic oil), (temporarily + 120°C); up to +60°C (air).
        • Hydraulic hose with single steel wire braid EN 853 FORZA 1SN
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose with a single steel wire braid, designed for medium-pressure hydraulic installations. Commonly used in power hydraulics of agricultural equipment, small working machines, machine tools, equipment with a hydraulic drive. Standards: EN 853-1SN, ISO 1436, SAE 100 R1AT. Inner layer: black synthetic rubber. Reinforcement: single steel wire braid. Outer layer: black synthetic rubber. Working pressure: from 35 bar to 250 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (hydraulic oil), (momentarily +120°C); up to +60°C (air).
        • Hydraulic hose with single steel wire braid and smooth cover, EN 857 1SC
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic hose, smooth on the outside, with a single steel wire braid, of reduced outer diameter and weight and increased flexibility (COMPACT type). With extended service life compared to the standard. Confirmed hose life of 300,000 impulse cycles. Flame-retardant outer layer (MSHA). Complies with standards: EN 857 1SC, ISO 11237-1. Inner layer: black synthetic rubber. Reinforcement: single steel wire braid. Outer layer: black synthetic rubber. Working pressure: from 90 bar to 225 bar - depending on hose diameter. Operating temperature: from -40°C to +100°C (momentarily up to +120°C). For water and air, maximum operating temperature +70°C.
        • Hydraulic hose with single textile braid TEXMASTER 1 EN 854 1TE / SAE 100 R6
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Low-pressure hydraulic hose intended for general use in hydraulic systems. The design based on a single textile braid ensures optimal flexibility, resistance to working pressure and long service life in daily use. Standard: EN 854 2TE, SAE 100 R6. Inner layer: oil-resistant black synthetic rubber. Reinforcement: single high-tensile textile braid. Outer layer: synthetic black rubber resistant to oils, weather conditions and abrasion. Working pressure: from 17 bar to 34 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (for water +70°C, for air +50°C).
        • Hydraulic hose with single textile braid TEXMASTER 2 EN 854 2TE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Low-pressure hydraulic hose designed for general use in hydraulic systems. The hose construction is based on a single textile braid, which ensures good flexibility, durability and resistance to typical operating loads. Standard: EN 854 2TE. Inner layer: oil-resistant black synthetic rubber. Reinforcement: single high-strength textile braid. Outer layer: black synthetic rubber resistant to oils, weather conditions and abrasion. Working pressure: from 40 bar to 80 bar (depending on hose diameter). Operating temperature: from -40°C to +100°C (for water +70°C, for air +50°C).
        • White thermoplastic hose with a double polyester braid FP17500 MARINE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible high-pressure hose type R7 designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Micro-perforated outer layer, resistant to hydrolysis and microorganisms, suitable for use in humid, salty environments. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated white polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Non-conductive thermoplastic hose with a synthetic braid 3TR7N
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Non-conductive thermoplastic hose 3TR7N with synthetic braid is designed for high-pressure hydraulic installations with oil, especially near transformers and medium and high voltage electrical equipment. The construction includes a nylon inner layer, which allows for the conveyance of chemicals and water-based fluids. The outer layer is made of semi-matte non-stick type polyurethane, characterized by non-adhesive properties and preventing hoses from sticking together. Standards: SAE 100R7, ANSI A92.2 (standard for aerial work platforms - USA, in the range DN 3/16” ÷ 5/8”). Inner layer: polyamide. Reinforcement: synthetic braid. Outer layer: polyurethane. Working pressure: from 69 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
        • Non-conductive thermoplastic hose with a double synthetic braid 3TR8N
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Non-conductive thermoplastic hose 3TR8N with double synthetic braid intended for high-pressure hydraulic oil installations, especially near transformers and medium- and high-voltage electrical equipment. The design includes a nylon inner layer, which allows the transfer of chemicals and water-based fluids. The outer layer is made of semi-matte non-stick type polyurethane, characterized by non-adhesive properties and preventing hoses from sticking together. Standards: SAE 100R8. Inner layer: polyamide. Reinforcement: double synthetic braid. Outer layer: polyurethane. Working pressure: from 140 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
        • Twin thermoplastic hose with an aramid braid S2230
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible and durable R8 high-pressure thermoplastic hose in a twin version (two hoses with their outer layers welded together), intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: PA12 polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Twin thermoplastic hose with an aramid and steel braid MTBKH
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible hydraulic hose in a twin version (two hoses with their outer layers welded together), with an aramid braid and a steel braid for very high pressures, intended for oil hydraulic systems, fuels, gases, air and water-based fluids. Microperforated outer layer. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: microperforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Twin thermoplastic hose with an aramid and steel braid MTBKH
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible hydraulic hose in a twin version (two hoses with bonded outer covers), with an aramid braid and a steel braid for very high pressures, designed for oil hydraulic systems, fuels, gases, air and water-based fluids. Microperforated version available on request (for gases and air). Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 375 bar to 425 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
        • Twin thermoplastic hose with an aramid and steel braid SK2100
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible thermoplastic hose in a twin version (two hoses with their outer layers welded together), with an aramid braid and a steel braid for very high pressures, intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Thanks to the steel braid, the hose conducts electrical charges and can be used where static electricity poses a hazard. The hose should be earthed. Inner layer: PA12 polyamide, white or black depending on the batch. Reinforcement: aramid braid + steel braid. Outer layer: microperforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Twin thermoplastic hose with a polyester braid FP27010
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible R7 high-pressure hose in a twin version (two hoses with their outer layers welded together) for forklift trucks. Intended for oil hydraulic systems, gases, air, fuels and water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: from 155 bar to 190 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Twin thermoplastic hose with a steel braid MTB1
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          MTB1 thermoplastic hose with steel braid is a flexible high-pressure hose in a twin version (two hoses with bonded outer covers). Designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 350 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
        • Twin thermoplastic hose with a steel braid MTB2
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible thermoplastic MTB2 hose with double steel braid, designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. Twin version (two hoses with bonded outer covers). The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Working pressure: from 275 bar to 400 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
        • Twin thermoplastic hose with a steel braid SM240
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible high-pressure thermoplastic hose with a steel braid, in a twin version (two hoses with their outer layers welded together). Intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Thanks to the steel braid, the hose conducts electrical charges and can be used where static electricity poses a hazard due to the rapid flow of electrically non-conductive fluids: chemicals, organic solvents and paints. The hose should be earthed. Inner layer: PA12 polyamide. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Thermoplastic hose with a double aramid braid VE8 M
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          OL8M MARINE thermoplastic hose with aramid braid is a lightweight and flexible R8 type high-pressure hydraulic hose assembly, exceeding the requirements of the SAE 100R8 standard. Designed for transferring hydraulic oils, fuels, gases, air and water-based fluids. The micro-perforated outer layer is resistant to hydrolysis and the action of microorganisms, allowing use in humid and salty environments. Standards: SAE 100R8, ISO 3949-R8, MSHA. Inner layer: polyester. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
        • Thermoplastic hose with a synthetic braid 3TR7
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermoplastic hose 3TR7 with synthetic braid designed for high-pressure hydraulic oil installations and central lubrication systems. The inner layer made of nylon allows transport of chemicals, gases, air and water-based liquids. The outer sheath of semi-matte, micro-perforated non-stick polyurethane has non-adhesive properties and prevents sticking to other surfaces. The hose is characterized by lightness and high flexibility. Standards: SAE 100R7. Inner layer: polyamide. Reinforcement: synthetic braid. Outer layer: micro-perforated polyurethane. Working pressure: from 69 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
        • Thermoplastic hose with a double aramid braid VE8 M
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          AT8 MARINE thermoplastic hose with a double aramid braid is intended for conveying liquids, gases and air. Features a lightweight and flexible construction. The inner layer made of non-toxic material and the absence of adhesives in the braid structure ensure high hygiene standards. The product meets the requirements of FDA 21 CFR 177.2600 (for food substances containing less than 8% alcohol) and European standards 1935/2004/EC, 2023/2006/EC and 10/2011/EU (food simulants A, B, C, D1). Not intended for medical or pharmaceutical applications. The microperforated outer layer is resistant to hydrolysis and microorganisms, allowing use in humid and saline environments. Stainless steel fittings are recommended. Standards: SAE 100R8, ISO 3949-R8. Inner layer: non-toxic PBT polyester. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Working pressure: from 165 bar to 1400 bar, depending on the hose diameter. Working temperature: from -40°C to +82°C (for water and air up to +70°C).
        • Thermoplastic hose with a double aramid braid S0230
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible and durable thermoplastic high-pressure hose, type R8, designed for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: PA12 polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Thermoplastic hose with a double aramid braid VE8 M
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A light, flexible high-pressure hose of R8 type with a double aramid braid. Exceeds the pressure requirements of the SAE 100R8 standard. Designed for the transport of chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The light and flexible construction eases installation. The micro-perforated outer layer is resistant to hydrolysis and microorganisms, allowing the hose to be used in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, DNV-GL. Inner layer: polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
        • Thermoplastic hose with a double polyester braid ATOXIC7 MARINE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          AT7 MARINE thermoplastic hose with a double polyester braid is intended for conveying liquids, gases and air. Features a lightweight and flexible construction. The inner layer made of non-toxic material and the absence of adhesives in the braid structure ensure high hygiene standards. The product meets the requirements of FDA 21 CFR 177.2600 (for food substances containing less than 8% alcohol) and European standards 1935/2004/EC, 2023/2006/EC and 10/2011/EU (food simulants A, B, C, D1). Not intended for medical or pharmaceutical applications. The microperforated outer layer is resistant to hydrolysis and microorganisms, allowing use in humid and saline environments. Stainless steel fittings are recommended. Standards: SAE 100R7, ISO 3949-R7. Inner layer: non-toxic PBT polyester. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Working temperature: from -40°C to +82°C (for water and air up to +70°C).
        • Thermoplastic hose with a double polyester braid S2190
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible and durable thermoplastic high-pressure hose, type R7, in a twin version (two hoses with bonded outer covers), designed for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: PA12 polyamide, white or black depending on the batch. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
        • Thermoplastic hose with a double synthetic braid 3TR8
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A 3TR8 thermoplastic hose with a double synthetic braid, designed for high-pressure hydraulic oil installations. The inner layer, made of nylon, allows the transport of chemicals, gases, air and water-based liquids. The outer coating of semi-matte, micro-perforated non-stick polyurethane has non-stick properties and prevents sticking to other surfaces. The hose is characterized by light weight and high flexibility. Standards: SAE 100R8. Inner layer: polyamide. Reinforcement: double synthetic braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
        • Thermoplastic-Teflon hose with a steel braid MT 1 HT
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Specialist high-pressure hose with a PTFE inner layer, designed for hydraulic oils, aggressive chemicals, food substances, water and gases, resistant to high temperatures. Meets the requirements of FDA 21 CFR 177.1550, 1935/2004/EC and 10/2011/EU. Microperforated version available on request (for gases and air). Inner layer: Teflon (PTFE). Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 105 bar to 375 bar, depending on hose diameter. Working temperature: from -40°C to +135°C.
        • Cap for HP connections up to 4140 bar, steel AISI 316
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cap for HP connections up to 4140 bar, steel AISI 316

          All products | UHP adapters and accessories
          0 €
          A blind cap for high-pressure connections in the HP version, designed to operate at working pressures up to 4140 bar. Intended for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 4140 bar.
        • Cap for MP connections up to 1380 bar, steel AISI 316
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cap for MP connections up to 1380 bar, steel AISI 316

          All products | UHP adapters and accessories
          0 €
          Plug for high-pressure connections in the MP version, designed to operate at working pressures up to 1380 bar. Intended for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 1380 bar.
        • Straight adjustable reducing fitting with female thread, SNVR
          Select options This product has multiple variants. The options may be chosen on the product page / Details

          Straight adjustable reducing fitting with female thread, SNVR

          All products | Tube fittings for hydraulic pipes
          0 €
          Adjustable straight reducing hydraulic fitting, type SNV with a metric female thread, 24° seat DIN 2353 (O-ring seal). Available as: L (light series), S (heavy series). Material options: zinc-plated carbon steel / NBR seal, Zn-Ni-plated carbon steel / Viton seal, Guardian Seal®-plated carbon steel / NBR seal or AISI 316 stainless steel / Viton seal.
        • Tee fitting with male thread and adjustable female thread, cutting ring seal, EVT
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hydraulic T-tee, type EVO: 24° DIN 2353 seat with metric male thread and adjustable metric female thread, cutting ring seal. Available as: L (light series), S (heavy series). Material options: Zn-Ni-plated carbon steel, Guardian Seal®-plated carbon steel or AISI 316 stainless steel.
        • Straight connector for HP connections up to 4140 bar, steel AISI 316
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight connector for high-pressure connections in the HP version, suitable for working pressures up to 4140 bar. Designed for use with liquid and gaseous media. The set includes two nuts and two collars. Material: AISI 316 steel. Working pressure: up to 4140 bar.
        • Straight connector for MP connections up to 1380 bar, steel AISI 316
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight connector, for high-pressure connections in the MP version, suitable for operation under working pressure up to 1380 bar. The set includes two nuts and two back-up rings. Designed for use with liquid and gaseous media. Material: AISI 316 steel. Working pressure: up to 1380 bar.
        Go to Top