- Home
- Hydraulics and high pressure
- Thermoplastic hoses
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. Available also in version with microperforation (for gases and air). Inner layer: polyamide. Reinforcement: a polyester braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. Inner layer: polyester. Reinforcement: a steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 97 bar to 330 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. is suitable for use in environment high humidity and salty air. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyester. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Working pressure: from 165 bar to 350 bar, depending on the diameter hose. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: SAE 100R8, ISO 3949-R8. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. exceeds requirements SAE 100R8, ISO 3949-R8. Assembly: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: a double aramid braid. Outer layer: micro-perforated polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. resistant to salt water sea. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 155 bar to 207 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for oil installation hydraulic, gases, air, fuels, liquids based on water. resistant to very low temperatures and salt water sea. is suitable for use in environment high humidity and salty air. standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the diameter hose. Operating temperature: od -54°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for solvents, paints, isocyanate, polyol, gases, air, liquids based on water. standards: SAE 100R18, ISO 3949-R18. Assembly: use type Z fittings. Inner layer: polyamide. Reinforcement: double polyester braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsR18 type thermoplastic hydraulic hose with a working pressure of 210 bar. The isobaric construction ensures the same working pressure for all sizes. Designed for hydraulic systems using oil, gases, air, fuels and water-based fluids. Standards: SAE 100R18. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: 210 bar. Working temperature: from -40°C to +93°C (up to +65°C for water and air).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible, electrically non-conductive thermoplastic hose OL 8 NON CONDUCTIVE. Designed for hydraulic systems with oil, fuels and water-based fluids. Recommended for applications near transformers, medium- and high-voltage electrical installations and in insulated aerial platforms where insulating properties are required. The non-microperforated outer layer is resistant to hydrolysis and microorganisms, allowing operation in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, ANSI A92.2 (standard for aerial platforms - USA), MSHA. Inner layer: polyester. Reinforcement: double aramid braid. Outer layer: orange polyurethane. Working pressure: from 145 bar to 420 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible high-pressure hose type R7 designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Micro-perforated outer layer, resistant to hydrolysis and microorganisms, suitable for use in humid, salty environments. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: micro-perforated white polyurethane. Working pressure: from 155 bar to 207 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-conductive thermoplastic hose 3TR7N with synthetic braid is designed for high-pressure hydraulic installations with oil, especially near transformers and medium and high voltage electrical equipment. The construction includes a nylon inner layer, which allows for the conveyance of chemicals and water-based fluids. The outer layer is made of semi-matte non-stick type polyurethane, characterized by non-adhesive properties and preventing hoses from sticking together. Standards: SAE 100R7, ANSI A92.2 (standard for aerial work platforms - USA, in the range DN 3/16” ÷ 5/8”). Inner layer: polyamide. Reinforcement: synthetic braid. Outer layer: polyurethane. Working pressure: from 69 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-conductive thermoplastic hose 3TR8N with double synthetic braid intended for high-pressure hydraulic oil installations, especially near transformers and medium- and high-voltage electrical equipment. The design includes a nylon inner layer, which allows the transfer of chemicals and water-based fluids. The outer layer is made of semi-matte non-stick type polyurethane, characterized by non-adhesive properties and preventing hoses from sticking together. Standards: SAE 100R8. Inner layer: polyamide. Reinforcement: double synthetic braid. Outer layer: polyurethane. Working pressure: from 140 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible and durable R8 high-pressure thermoplastic hose in a twin version (two hoses with their outer layers welded together), intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: PA12 polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Working pressure: from 250 bar to 362 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hydraulic hose in a twin version (two hoses with their outer layers welded together), with an aramid braid and a steel braid for very high pressures, intended for oil hydraulic systems, fuels, gases, air and water-based fluids. Microperforated outer layer. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: microperforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hydraulic hose in a twin version (two hoses with bonded outer covers), with an aramid braid and a steel braid for very high pressures, designed for oil hydraulic systems, fuels, gases, air and water-based fluids. Microperforated version available on request (for gases and air). Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: polyurethane. Working pressure: from 375 bar to 425 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible thermoplastic hose in a twin version (two hoses with their outer layers welded together), with an aramid braid and a steel braid for very high pressures, intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Thanks to the steel braid, the hose conducts electrical charges and can be used where static electricity poses a hazard. The hose should be earthed. Inner layer: PA12 polyamide, white or black depending on the batch. Reinforcement: aramid braid + steel braid. Outer layer: microperforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible R7 high-pressure hose in a twin version (two hoses with their outer layers welded together) for forklift trucks. Intended for oil hydraulic systems, gases, air, fuels and water-based fluids. Standards: SAE 100R7, ISO 3949-R7. Inner layer: polyester. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: from 155 bar to 190 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMTB1 thermoplastic hose with steel braid is a flexible high-pressure hose in a twin version (two hoses with bonded outer covers). Designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 190 bar to 350 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible thermoplastic MTB2 hose with double steel braid, designed for conveying chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. Twin version (two hoses with bonded outer covers). The steel braid construction enables electrical charges to be conducted, allowing the hose to be used in environments with static electricity hazards, particularly with fast-flowing non-conductive liquids such as chemicals, organic solvents and paints. A microperforated version for gases and air is available on request. The hose must be earthed during operation. Inner layer: polyamide. Reinforcement: double steel braid. Outer layer: polyurethane. Working pressure: from 275 bar to 400 bar, depending on hose diameter. Working temperature: from -40°C to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible high-pressure thermoplastic hose with a steel braid, in a twin version (two hoses with their outer layers welded together). Intended for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Thanks to the steel braid, the hose conducts electrical charges and can be used where static electricity poses a hazard due to the rapid flow of electrically non-conductive fluids: chemicals, organic solvents and paints. The hose should be earthed. Inner layer: PA12 polyamide. Reinforcement: steel braid. Outer layer: microperforated polyurethane. Working pressure: from 180 bar to 300 bar, depending on the hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsOL8M MARINE thermoplastic hose with aramid braid is a lightweight and flexible R8 type high-pressure hydraulic hose assembly, exceeding the requirements of the SAE 100R8 standard. Designed for transferring hydraulic oils, fuels, gases, air and water-based fluids. The micro-perforated outer layer is resistant to hydrolysis and the action of microorganisms, allowing use in humid and salty environments. Standards: SAE 100R8, ISO 3949-R8, MSHA. Inner layer: polyester. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermoplastic hose 3TR7 with synthetic braid designed for high-pressure hydraulic oil installations and central lubrication systems. The inner layer made of nylon allows transport of chemicals, gases, air and water-based liquids. The outer sheath of semi-matte, micro-perforated non-stick polyurethane has non-adhesive properties and prevents sticking to other surfaces. The hose is characterized by lightness and high flexibility. Standards: SAE 100R7. Inner layer: polyamide. Reinforcement: synthetic braid. Outer layer: micro-perforated polyurethane. Working pressure: from 69 bar to 210 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAT8 MARINE thermoplastic hose with a double aramid braid is intended for conveying liquids, gases and air. Features a lightweight and flexible construction. The inner layer made of non-toxic material and the absence of adhesives in the braid structure ensure high hygiene standards. The product meets the requirements of FDA 21 CFR 177.2600 (for food substances containing less than 8% alcohol) and European standards 1935/2004/EC, 2023/2006/EC and 10/2011/EU (food simulants A, B, C, D1). Not intended for medical or pharmaceutical applications. The microperforated outer layer is resistant to hydrolysis and microorganisms, allowing use in humid and saline environments. Stainless steel fittings are recommended. Standards: SAE 100R8, ISO 3949-R8. Inner layer: non-toxic PBT polyester. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Working pressure: from 165 bar to 1400 bar, depending on the hose diameter. Working temperature: from -40°C to +82°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible and durable thermoplastic high-pressure hose, type R8, designed for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Standards: SAE 100R8, ISO 3949-R8. Inner layer: PA12 polyamide. Reinforcement: double aramid braid. Outer layer: microperforated polyurethane. Working pressure: from 140 bar to 362 bar, depending on hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA light, flexible high-pressure hose of R8 type with a double aramid braid. Exceeds the pressure requirements of the SAE 100R8 standard. Designed for the transport of chemicals, solvents, paints, isocyanate, polyol, gases, air, fuels and water-based fluids. The light and flexible construction eases installation. The micro-perforated outer layer is resistant to hydrolysis and microorganisms, allowing the hose to be used in humid and saline environments. Standards: SAE 100R8, ISO 3949-R8, DNV-GL. Inner layer: polyamide. Reinforcement: aramid braids. Outer layer: micro-perforated polyurethane. Working pressure: from 250 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAT7 MARINE thermoplastic hose with a double polyester braid is intended for conveying liquids, gases and air. Features a lightweight and flexible construction. The inner layer made of non-toxic material and the absence of adhesives in the braid structure ensure high hygiene standards. The product meets the requirements of FDA 21 CFR 177.2600 (for food substances containing less than 8% alcohol) and European standards 1935/2004/EC, 2023/2006/EC and 10/2011/EU (food simulants A, B, C, D1). Not intended for medical or pharmaceutical applications. The microperforated outer layer is resistant to hydrolysis and microorganisms, allowing use in humid and saline environments. Stainless steel fittings are recommended. Standards: SAE 100R7, ISO 3949-R7. Inner layer: non-toxic PBT polyester. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: from 70 bar to 230 bar, depending on the hose diameter. Working temperature: from -40°C to +82°C (for water and air up to +70°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, flexible and durable thermoplastic high-pressure hose, type R7, in a twin version (two hoses with bonded outer covers), designed for chemicals, solvents, paints, isocyanate, polyol, as well as gases, air, fuels and water-based fluids. Standards: DIN 24951, SAE 100R7, ISO 3949-R7. Inner layer: PA12 polyamide, white or black depending on the batch. Reinforcement: double polyester braid. Outer layer: microperforated polyurethane. Working pressure: from 157 bar to 220 bar, depending on hose diameter. Working temperature: from -40°C to +93°C (for water and air up to +65°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA 3TR8 thermoplastic hose with a double synthetic braid, designed for high-pressure hydraulic oil installations. The inner layer, made of nylon, allows the transport of chemicals, gases, air and water-based liquids. The outer coating of semi-matte, micro-perforated non-stick polyurethane has non-stick properties and prevents sticking to other surfaces. The hose is characterized by light weight and high flexibility. Standards: SAE 100R8. Inner layer: polyamide. Reinforcement: double synthetic braid. Outer layer: micro-perforated polyurethane. Working pressure: from 140 bar to 350 bar, depending on hose diameter. Operating temperature: from -40°C to +100°C (water-based fluids up to +66°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecialist high-pressure hose with a PTFE inner layer, designed for hydraulic oils, aggressive chemicals, food substances, water and gases, resistant to high temperatures. Meets the requirements of FDA 21 CFR 177.1550, 1935/2004/EC and 10/2011/EU. Microperforated version available on request (for gases and air). Inner layer: Teflon (PTFE). Reinforcement: steel braid. Outer layer: polyurethane. Working pressure: from 105 bar to 375 bar, depending on hose diameter. Working temperature: from -40°C to +135°C.






































