- Home
- Industrial fittings
- Clamps for mounting ends
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A clamp screw-type with closure articulated for large loads is characterized strength design and two full pins. recommended for tight connections thick-walled, reinforced hoses industrial. A clamp made with high quality tape steel o wide od 18 mm for 26 mm. flanged edges tape prevents damage surface hose, on which works A clamp. A clamp has on band marking diameter minimum and maximum and Material, with which is made. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. Material: all element made of steel stainless AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A clamp screw-type with closure articulated for large loads is characterized strength design and two full pins. recommended for tight connections thick-walled, reinforced hoses industrial. A clamp made with high quality tape steel o wide od 18 mm for 26 mm. flanged edges tape prevents damage surface hose, on which works A clamp. A clamp has on band marking diameter minimum and maximum and Material, with which is made. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. Material: all element made of galvanized steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial, entirely made of steel stainless AISI 316, recommended for applications in industry food, chemical, marine, etc. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-S o wide tape 12 mm is characterized greater strength, higher permissible torque tightening od clamps ASFA-L (9 mm), guaranteeing strong clamp and is recommended for heavier applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: steel stainless AISI 316 (W4).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge right-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp right-handed OMP Intended is for mounting typical spiral hoses ducting of spiral with wire coiled in right e.g. P1PU, P2PU, P3PU, P7PU, SMARTFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 430 (bolt of galvanized steel).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp band with a lock worm equipped in spring for compensation changes dimensional connections (shrinkage hose in result flow material on cold or in result large changes temperatures). spring constitutes set 8 springs roller (disc) – washers under head screws. ensures to maintaining crimp clamps and tightness on whole circuit hose, prevents leakage with installation. mechanism spring clamps allows automatically increase or reduce jej diameter maintaining clamp clamps. especially recommended in case large changes temperatures. O correct crimp clamps indicates protruding except for housing lock A fitting screws and flattened spring roller. inner insert clamps protects surface hose against damage. assembly torque tightening 5.6 Nm (max. 9.6 Nm). Material screws/lock: steel stainless 410. Material tape: steel stainless 300. Band width: 14.3 mm (9/16").
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A clamp two-screw with double band with closure articulated for large loads. two screws and solid pins guarantee precise and tight connection hose with fitting. recommended for connections thick-walled, reinforced hoses industrial. A clamp made with high quality tape steel o wide 20 mm and 24 mm. flanged edges bridges prevents damage surface hose. A clamp has on band marking diameter minimum and maximum and Material. tightening bolts using wrench Allen. all element made of steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp band with a lock worm equipped in spring for compensation changes dimensional connections (shrinkage hose in result flow material on cold or in result large changes temperatures). spring constitutes set 10 springs roller (disc) – washers under head screws. ensures to maintaining crimp clamps and tightness on whole circuit hose, prevents leakage with installation. mechanism spring clamps allows automatically increase or reduce jej diameter maintaining clamp clamps. especially recommended in case large changes temperatures for heavier applications. O correct crimp clamps indicates protruding except for housing lock A fitting screws and flattened spring roller. inner insert clamps protects surface hose against damage. assembly torque tightening 8.5 Nm (max. 14.1 Nm). Material screws/lock: steel stainless 410. Material tape: steel stainless 300. Band width: 16 mm (5/8").
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial, entirely made of steel stainless AISI 316, recommended for applications in industry food, chemical, marine, etc. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-L o wide tape 9 mm recommended is for standard applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: steel stainless AISI 316 (W5).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-L o wide tape 9 mm recommended is for standard applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: galvanised carbon steel (W1).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-S o wide tape 12 mm is characterized greater strength, higher permissible torque tightening od clamps ASFA-L (9 mm), guaranteeing strong clamp and is recommended for heavier applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: galvanised carbon steel (W1).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A clamp two-screw with double band with closure articulated for large loads. two screws and solid pins guarantee precise and tight connection hose with fitting. recommended for connections thick-walled, reinforced hoses industrial. A clamp made with high quality tape steel o wide 20 mm and 24 mm. flanged edges bridges prevents damage surface hose. A clamp has on band marking diameter minimum and maximum and Material. tightening bolts using wrench Allen. all element made of galvanized steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, strong A clamp with closure articulated for large loads o flanged edges tape, recommended for fastening thick-walled, reinforced hoses industrial and pipes. unique The design ensures even clamping on whole circuit, ensuring optimal sealing. moving A bridge allows multiple assembly without the need removing hose. made in accordance with the directive RoHs 20032/95/EC. three point welds on band, bolt with spacer o high strength together with with half-shafts securing guarantee maximum and secure clamping. A clamp has on band marking diameter minimum and maximum and Material, with which is made. A clamp in version W4 made is entirely of steel stainless and Intended for demanding applications, where essential is high resistance to corrosion - for applications marine and in industry food. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. important! exceeding value torque clamping will cause bend housing screws; not recommended mounting using tools pneumatic. tape and A bridge made are of steel AISI 430, bolt and shafts of galvanized steel. maximum pressure working up to 45 bar dependent is od type hose and diameter crimp.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge right-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp right-handed OMP Intended is for mounting typical spiral hoses ducting of spiral with wire coiled in right e.g. P1PU, P2PU, P3PU, P7PU, SMARTFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP with 2 ears for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: galvanised carbon steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality, strong A clamp with closure articulated for large loads o flanged edges tape, recommended for fastening thick-walled, reinforced hoses industrial and pipes. unique The design ensures even clamping on whole circuit, ensuring optimal sealing. moving A bridge allows multiple assembly without the need removing hose. made in accordance with the directive RoHs 20032/95/EC. three point welds on band, bolt with spacer o high strength together with with half-shafts securing guarantee maximum and secure clamping. A clamp has on band marking diameter minimum and maximum and Material, with which is made. A clamp in version W4 made is entirely of steel stainless and Intended for demanding applications, where essential is high resistance to corrosion - for applications marine and in industry food. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. important! exceeding value torque clamping will cause bend housing screws; not recommended mounting using tools pneumatic. tape and A bridge made are of steel AISI 304, bolt and shafts of steel AISI 302. maximum pressure working up to 45 bar dependent is od type hose and diameter crimp.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge right-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp right-handed OMP Intended is for mounting typical spiral hoses ducting of spiral with wire coiled in right e.g. P1PU, P2PU, P3PU, P7PU, SMARTFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp MINI with single bolt Intended for hoses industrial o not very large diameters and relatively thin wall. equipped in tongue tape, which protects hose against contact of bolt and ensures equal clamping circumferential. flanged edges clamp not cause damage hose. A clamp perfectly fits and adheres for surface hose, ensuring strong, even crimped bolt with a hexagonal head has a notch enabling use for mounting various types tools. Material: steel carbon galvanized electrolytically (W1).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTape Intended for production straps clamping for hoses o any diameter. length standard: 25 m. Band width: 8 mm or 14 mm. Material: steel stainless.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP-W is improved solution ring EARCLIP. has inner an insert protecting, which role is protection surface hose in space crimp ring and ensuring more even clamping po circuit. recommended for hoses o delicate construction. rounded edges inside ring protect hose against damage. Material: steel AISI 304 (ring main), steel AISI 301 (insert).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP-W is improved solution ring EARCLIP. has inner an insert protecting, which role is protection surface hose in space crimp ring and ensuring more even clamping po circuit. recommended for hoses o delicate construction. rounded edges inside ring protect hose against damage. Material: galvanised carbon steel (ring main), steel stainless AISI 301 (insert).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp MINI with single bolt Intended for hoses industrial o not very large diameters and relatively thin wall. equipped in tongue tape, which protects hose against contact of bolt and ensures equal clamping circumferential. flanged edges clamp not cause damage hose. A clamp perfectly fits and adheres for surface hose, ensuring strong, even crimped bolt with a hexagonal head has a notch enabling use for mounting various types tools. Material: all element of steel AISI 304 (W4).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp band with a lock worm equipped in spring for compensation changes dimensional connections (shrinkage hose in result flow material on cold or in result large changes temperatures). spring constitutes set 8 springs roller (disc) – washers under head screws. ensures to maintaining crimp clamps and tightness on whole circuit hose, prevents leakage with installation. mechanism spring clamps allows automatically increase or reduce jej diameter maintaining clamp clamps. especially recommended in case large changes temperatures. O correct crimp clamps indicates protruding except for housing lock A fitting screws and flattened spring roller. inner insert clamps protects surface hose against damage. assembly torque tightening 5.6 Nm (max. 9.6 Nm). Material screws/lock: steel carbon galvanized. Material tape: steel stainless 300. Band width: 14.3 mm (9/16").
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge left-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp left-handed OML Intended is for mounting hoses type CLIP (hoses this type made are with impregnated fabric, a spiral coiled in left made is with sheet and wire steel) np: KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP with 2 ears for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp o smooth surface internal, o full circuit, without interruptions, made with one section material. rounded edges protect hose against damage. Intended for mounting light hoses PVC and rubber. recommended especially for serial production lines flexible thanks to easy and quick assembly. made of steel stainless AISI 304 (W4) allows on use in industry food, medical, electronic, automotive and equipment welding. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpring clamp with double wire intended for fast fastening low-pressure hoses. made is with galvanized steel spring. assembly pliers universal through pressing tabs crimp for each other, co allows fitting crimp on hose o diameter slightly larger od maximum (with range diameters crimp: Diameter inner crimp spring ensuring appropriate resilient clamping).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamps clamping for repeated mounting HERBIE CLIP® made with black polyamide (PA66) resistant to radii UV. Available also version with polypropylene (PP). double configuration teeth ensures over twice greater force crimp than similar products with only one row. The design straps allows easy and fast assembly and disassembly using intended for this order: special tools, standard tools type „worm clamp” or manually. Operating temperature: od -40°C up to +125°C (PA66, momentarily for +170°), od -40°C up to +60°C (PP, momentarily up to +90°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLock intended for production straps clamping. lock for tape o wide 8 mm or 14 mm. Material lock: steel AISI 304 or AISI 430. Material screws: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP with 1 eye for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: galvanised carbon steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing clamping EAR CLIP with 1 eye for mounting different kinds hoses low-pressure reinforced a braid or without reinforcement. easy and fast assembly at means intended for this order pliers. rounded edges inside ring protect hose against damage. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrength pincers hand intended for mounting straps clamping type EAR-CLIP or similar. profile jaws allows easy and reliable clamp face.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional wrench with flexible steel arm terminated a nozzle 7 mm for straps worm-drive ASFA-L, ASFA-S and similar. length arm allows operation in hard-to-reach places. convenient ergonomic grip ensures secure grip. color grip: blue.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge left-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp left-handed OML Intended is for mounting hoses type CLIP (hoses this type made are with impregnated fabric, a spiral coiled in left made is with sheet and wire steel) np: KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 430 (bolt of galvanized steel).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp worm-drive bridge left-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp left-handed OML Intended is for mounting hoses type CLIP (hoses this type made are with impregnated fabric, a spiral coiled in left made is with sheet and wire steel) np: KEVLAR SI CL, SILICON CL, TEFLON CL, GRIPFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrength pliers hand intended for mounting straps clamping type CAW or similar (with 1 or 2 "ears"). profile jaws allows easy and reliable clamp face and side.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp DCL made with one section tape with closure in the molds fastened latch, which prevents accidental disconnection. force crimp is evenly distributed on clamp, a smooth inside surface tape protects hose against damage. easy and fast assembly and disassembly using intended for this order tools. made of steel stainless AISI 304 (W4) allows on use in industry food, AGD a also automotive. color stripe on clamp facilitates identification. Note: clamp latch not has regulation crimp, Diameter po mounting must be precisely selected for hose. Material: steel AISI 304. stripe identification Available in colors (information the given in attention): blue, green, violet, black, red.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsEasy in mounting and regulation A clamp with double wire and system tightening bolt Intended is for fast fastening light and low-pressure hoses of spiral external. smooth edges round wire minimize damage hose. A clamp generally used in installations ventilation or in equipment AGD. ideal for use industrial and domestic. maximum pressure medium dependent od type hose and shape parts connection. Material: galvanized steel spring (bolt of galvanized steel).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp band with a lock worm equipped in spring for compensation changes dimensional connections (shrinkage hose in result flow material on cold or in result large changes temperatures). spring constitutes set 10 springs roller (disc) – washers under head screws. ensures to maintaining crimp clamps and tightness on whole circuit hose, prevents leakage with installation. mechanism spring clamps allows automatically increase or reduce jej diameter maintaining clamp clamps. especially recommended in case large changes temperatures for heavier applications. O correct crimp clamps indicates protruding except for housing lock A fitting screws and flattened spring roller. inner insert clamps protects surface hose against damage. assembly torque tightening 8.5 Nm (max. 14.1 Nm). Material screws/lock: steel carbon galvanized. Material tape: steel stainless 300. Band width: 16 mm (5/8").
Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamps latch EZYCLIK™-P o low profile head made with black polyamide (PA66) resistant to radii UV. Available also version with polypropylene (PP) and polyamide glass-fiber-reinforced. clamps were specially designed for fastening hoses in places o limited space. unique The design straps ensures fast and reliable fixing. Note: clamp latch not has regulation crimp, Diameter po closing must be precisely selected for hose. Operating temperature: od -40°C up to +125°C (PA66), od -40°C up to +60°C (PP).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPliers hand enable easy and fast assembly and disassembly straps DCL. convenient ergonomic grip ensures secure grip. color grip: red.


















































