Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose SUPERFLEX RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). version of reinforcement textile and spiral steel protecting against collapse bent hose. has „soft” fittings, free of spiral steel, enabling easy and tight assembly on spigots using straps. corrugated externally The design hose bends easily, replacing in many cases original formed connector and ensuring unobstructed solid Flow rate even at strong bending. The design a connector corresponds standard SAE J20 R5 and is resistant to temperature and on fluids cooling used in automotive. no data regarding pressure working. Operating temperature: od -40°C up to +125°C. Material a connector: black EPDM rubber. Reinforcement: textile braid + steel spiral.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. length standard: 1000 mm (Available also in section 2000 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 0.86 bar to 8.75 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. Available in the molds simple a connector o length 1000 mm. Working pressure: from 0.6 bar to 3.7 bar, depending on the diameter a connector. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. available with arms o length 200, 250 and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter elbow. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Arm length: 100 mm (also available with arms of length 152, 250 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 1.83 bar to 8.75 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose SUPER FLEX reinforced polyester and spiral steel intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with rubber fluorine (fluorocarbon). length standard: 1000 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester + steel spiral (wall thickness wire 1.2 mm). Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Standard arm length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 45° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Arm length: 100 mm (also available with arms of length 152, 250 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 1.5 bar to 8.33 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector reducing silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. standard length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 1 bar to 7.33 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced meta-aramid intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with rubber fluorine (fluorocarbon). length standard: 1000 mm (Available also in section 2000 mm and 3000 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. color layer outer: blue. Material: rubber silicone. Reinforcement: plies meta-aramid. Working pressure: from 1 bar to 8.75 bar (depending on the diameter hose). Operating temperature: od -50°C up to +230°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector anti-vibration silicone with one corrugation reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with rubber fluorine (fluorocarbon). pressure factor safety: 3:1. meets standard SAE J2006 R3. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow reducing silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Standard arm length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 1 bar to 7.33 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 45° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. available with arms o length 200, 250 and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter elbow. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 135° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Standard arm length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber formed hose without reinforcement, flexible and stretchable (on diameter) o special serrated shape, ensuring resistance to kinking at bending and possibility cutting on sections o required length. manufactured in sections o length 1 m, which can cut and easily molds in installation. Available in version basic, made with rubber EPDM, for water, liquids cooling, resistant to diluted acids and bases, on elevated temperature and ozone. range temperatures use od -40°C up to +135°C (TUBANO) and in version o elevated resistance outer on oil, made with other rubber synthetic. range temperatures use od -30°C up to +120°C (TUBANO OIL). Hose material: formed EPDM rubber. Working pressure: 1.5 bar.
