Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal pressure gauge industrial 63 mm with connection lower FM 631, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection bottom: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal pressure gauge industrial 63 mm with connection rear FM 632, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI 304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection rear: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal pressure gauge industrial 63 mm with connection rear for installation FM 633, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI 304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection rear: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o other size. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: steel AISI 316Ti.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o other size. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA clamp for mounting panel for pressure gauge type FM 632 with rear connection.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation, securing against overload and stroke pressure during opening and enabling replacement. version straight (FT290) and version angled 90° (FT291). possibility mounting panel on the thread under knob. On special order available also in made of steel stainless AISI 316. Material: galvanised carbon steel (body), steel carbon (needle), polyamide 66 (knob). sealing: NBR/PTFE. Working pressure: 350 bar. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o greater size. pressure gauge mounted for thread internal d1. connection to has character self-sealing – cone on bottom hole d1 presses in hole plug centring the connection pressure gauge. threads d1 and d2 are protected against unscrewing connections through applied special adhesive. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA guard rubber pressure gauge o diameter disc 63 mm, fully role protection against impacts and destruction. Intended for pressure gauge with connection lower and rear.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial Adapter for direct connection pressure gauge for the system hydraulic. limited Flow rate oil through small hole in adapter dampens sudden strokes pressure in system. rotational A nut allows appropriate setting pressure gauge. On special order Available also of steel stainless AISI 316. Material: steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation. valve secures pressure gauge against overload and stroke pressure during opening and allows its replacement. occurs in two versions: straight – in-line (FPE) and angled 90° (FPEA). has thread under knob, enabling assembly panel. Material: brass nickel-plated (body), steel carbon (needle), steel galvanized (connection - A nut), plastic (knob). sealing: NBR. Connection: 1/4" BSP female (pressure-gauge), 1/4" BSPT male. Operating temperature: od -20°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter consists ofcy additional equipment valves shut-off type FPE and FPEA. Working pressure: 350 bar. Material: steel carbon, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNipple with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o greater size. pressure gauge mounted for thread internal d1. connection to has character self-sealing – cone on bottom hole d1 presses in hole plug centring the connection pressure gauge. threads d1 and d2 are protected against unscrewing connections through applied special adhesive. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: steel AISI 316Ti.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation. valve secures pressure gauge against overload and stroke pressure during opening and allows its replacement. occurs in two versions: straight – in-line (FPE) and angled 90° (FPEA). has thread under knob, enabling assembly panel. Do valve should use adapter o index DC-FPE-FPEA, tightened for the connection with thread internal (ordered separately). Material: brass nickel-plated (body), steel carbon (needle), steel galvanized (connection - A nut), plastic (knob). sealing: NBR. Connection: 2 x 1/4" BSP female (pressure-gauge). Operating temperature: od -20°C up to +100°C.
