0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -10 — -10

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 60 — 80

      Material
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 112 with magnet, without cushioning. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 8, 10, 12, 16, 20 and 25 mm. stroke working: od 5 for 500 mm. Working pressure: od 0.8 up to 10 bar (Ø 8, 10, 12 mm); od 0.6 up to 10 bar (Ø 16, 20, 25 mm). sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 113, has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 10 for 500 mm. Working pressure: od 0.6 up to 10 bar. sealing: polyurethane, NBR. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator short-stroke double-acting operation, of hidden piston rod with magnet. series SSCY is characterized compact design and Intended is for mounting in confined spaces. service life working actuators without loads transverse with seals with NBR is 15 million cycles, with seals polyurethane 30 million cycles. Z notes on variability many agents having influence on service life, The presented value not should be treated as binding or guaranteed, a only as reference. available diameter piston: Ø 12 ÷ 80 mm. stroke working: od 5 for 120 mm. Material seal actuator: NBR or polyurethane. Working pressure: od 0.4 up to 10 bar - depending on the diameter piston. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Micro-actuator single-acting operation (of hidden piston rod) intended for mounting in confined spaces. has ring sealing (O-ring), enabling direct assembly in body machine. possible oil-free operation. important! during when actuator works with high frequency recommended is, by piston not reached limit position. Material: brass nickel-plated (body), steel AISI 303 (piston for Ø6 - Ø10), brass (piston for Ø16), steel nickel-plated (A nut), steel spring (spring), brass (bearing sliding). Working pressure: 2÷6 bar. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 110, without magnet, without cushioning. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 8, 10, 12, 16, 20 and 25 mm. stroke working: od 5 for 500 mm. Working pressure: od 0.8 up to 10 bar (Ø 8, 10, 12 mm); od 0.6 up to 10 bar (Ø 16, 20, 25 mm). sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator A compact series CMPC, with piston rod with thread external, features small weight and short installation, co allows ich assembly in hard reachable places. special profile actuator connected is with covers external using bolts, a to ensures optimal its rigidity axial and increases variety ways its mounting. W equipped is in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows on easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal Working pressure: 0.4 ÷ 0.6 bar, depending on the diameter. maximum Working pressure: up to 10 bar. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A sensor proximity SQ type square

          All products | Pneumatic actuators
          0 €
          A sensor proximity SQ type square for actuators is characterized a certain and quick a bracket using screws eccentric, the possibility mounting using a screwdriver and wrench Allen 2.5 mm, edges thrust locating A sensor during mounting, increased resistance to factors atmospheric and moisture (IP 67, IP 68, IP 69K). Material housing sensor: polyamide (PA). Voltage supply: 5 ÷ 30V AC/DC (10 ÷ 30V AC/DC - HALL). Operating temperature: od -30°C up to +80°C (od -5°C up to +80°C - installations dynamic).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Head fork for actuator pneumatic model GK-M

          All products | Pneumatic actuators
          0 €
          Head fork for mounting on piston rod actuator. Do use in case occurrence loads not being in axis piston rod actuator. head fork gives greater the ability assembly. thread: M4 ÷ M36x2. Material: galvanised carbon steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A bracket ISO for mounting with a flange swivel. W set: 4 screws with washers. Material: aluminum cast (flange), steel carbon galvanized (screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Head articulated for mounting on piston rod actuator. Do use in case occurrence loads not being in axis piston rod actuator. head articulated gives greater the ability assembly. thread: M4 ÷ M36x2. Material: galvanised carbon steel (head), steel (joint).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange swivel with double eye for mounting on rear parts cover actuator, of pin. allows performing movement actuator pneumatic during its use. W set: 4 screws with washers, 1 pin, 2 rings securing. Material: aluminum cast (flange), steel+bronze+PTFE (sleeve), steel carbon galvanized (screws and washer), steel carbon galvanized (pin), steel stainless (ring securing).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator ISO 15552 version: STD, type A, series 3. Material: NBR. Diameter: 32 ÷ 125.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A handle serves for mounting sensor proximity on actuator cylindrical. brackets sensors DXF: o index codes W09500001... - intended for actuators with sleeve aluminum, o index codes W09500005... - intended for actuators with sleeve of steel stainless. Material: steel stainless, plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A bracket CETOP for mounting with a flange swivel. W set: 4 screws with washers. Material: aluminum cast (flange), steel carbon galvanized (screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange swivel with single eye for mounting on rear parts cover actuator, without pin. allows performing movement actuator pneumatic during its use. W set: 4 screws. Material: aluminum cast (flange), steel+bronze+PTFE (sleeve), steel carbon galvanized (screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A mounting foot (angle bracket) Intended for actuator ISO 15552 series STD, series 3, "two flat", o diameter od 32 mm for 125 mm, model A. W set: 2 screws. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange swivel with joint ball for mounting on rear parts cover actuator. W set: 4 screws with washers. Material: aluminum cast (flange), steel (joint), steel carbon galvanized (screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator ISO 15552 Ø 160 - 200. Material: NBR. Diameter: Ø 160, Ø 200.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 80, 100.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A handle assembly sensor proximity for actuators ISO 15552, in version with sleeve cylindrical. Material: aluminum. Diameter: 160 ÷ 200.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 32 ÷ 63.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set seals replaceable for actuator compact ISO 21287, series LINER. Material: polyurethane. Diameter: 20, 25.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A nut for use on piston rod, to lock e.g. heads fork/articulated (for diameters 32 ÷ 125 mm).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter assembly sensor proximity for brackets DST/ST, used in actuator series R1 and ISO 15552. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A mounting foot model A for mini actuator ISO 6432. size actuator: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixing actuator pneumatic, for mounting for cover rear or front actuator. allows on fixed mounting actuator in machines and equipment. range diameters actuators: 32 mm ÷ 125 mm. W set: 4 screws mounting. Material: galvanised carbon steel (flange, screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange fixing for actuator, model C, oval

          All products | Pneumatic actuators
          0 €
          Flange fixing actuator pneumatic, for mounting for cover rear or front actuator. allows on fixed mounting actuator in machines and equipment. size actuator: Ø8 ÷ Ø25. Material: galvanised carbon steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A mounting foot model AC for actuator cylindrical - sera RNDC. packed individually. size actuator: Ø32, Ø40, Ø50. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator series TP made in accordance with the standard ISO 6432 have cover made with plastic o high strength, whereas ferrules are made with aluminum anodized. available versions: with magnet or without magnet. Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 1 for 80 mm (with the possibility order for 500 mm). Working pressure: od 0.6 up to 10 bar. sealing: polyurethane. Operating temperature: od -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 109 with cushioning, without magnet. has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 10 for 320 mm. Working pressure: od 0.6 up to 10 bar. sealing: polyurethane, NBR, FKM/FPM. Operating temperature: od -10°C up to +150°C depending on used seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator double-acting operation with magnet and cushioning ISO 15552 series 3. has special sleeve o reduced for minimum weight, made with aluminum anodized, calibrated, and two grooves for mounting sensors on common plane with ports supply. other wall are smooth and easy in cleaning. cover actuator made with high-pressure casting aluminum. Piston diameter: Ø 32 ÷ 100 mm. stroke working: od 50 for 800 mm. Working pressure: od 0.4 up to 10 bar. sealing: NBR, polyurethane. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator A compact series CMPC, with piston rod with thread internal, features small weight and short installation, co allows ich assembly in hard reachable places. special profile actuator connected is with covers external using bolts, a to ensures optimal its rigidity axial and increases variety ways its mounting. depending on version equipped is or not in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard ISO 15552. standard ta allows on easy and fast selection and replacement actuator during work repair machine. Piston diameter: Ø 32 ÷ Ø 100. type actuator: double-acting operation, double-acting operation with passing piston rod and single-acting operation of hidden piston rod. Material piston rod: steel C45 chrome-plated or steel stainless. maximum Working pressure: up to 10 bar. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator single-acting operation ISO 15552 type A, has cover made with high-pressure casting aluminum and profile made with aluminum anodized, calibrated, which contains on three walls longitudinal grooves enabling direct assembly and protection sensors position piston. Te same grooves serve for direct mounting valves and other mechanical parts. Piston diameter: Ø 32 ÷ 63 mm. stroke working: od 30 for 200 mm. Working pressure: od 0.4 up to 10 bar. sealing: polyurethane. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator short-stroke double-acting operation, with protection against rotation with magnet. series SSCY is characterized compact design and Intended is for mounting in confined spaces. service life working actuators without loads transverse with seals with NBR is 15 million cycles, with seals polyurethane 30 million cycles. Z notes on variability many agents having influence on service life, The presented value not should be treated as binding or guaranteed, a only as reference. available diameter piston: Ø 12 ÷ 80 mm. stroke working: od 10 for 80 mm. Material seal actuator: NBR, polyurethane. Working pressure: od 0.4 up to 10 bar - depending on the diameter piston. Operating temperature: od -10°C up to +80°C - depending on kinds seal.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator A compact series CMPC, with piston rod with thread external, features small weight and short installation, co allows ich assembly in hard reachable places. special profile actuator connected is with covers external using bolts, a to ensures optimal its rigidity axial and increases variety ways its mounting. depending on version equipped is or not in magnet built-in in piston, a grooves in profile enable use sensors magnetic without additional accessories. made in accordance with the standard NFE 49-004-1 and 2 (UNITOP). standard ta allows on easy and fast selection and replacement actuator during work repair machine. selected actuator have through-flow hole in piston rod. Piston diameter: Ø 32 ÷ Ø 100. type actuator: single-acting and double-acting operation. Material piston rod: steel C45 chrome-plated or steel stainless. minimal Working pressure: 0.4 ÷ 0.6 bar, depending on the diameter. maximum Working pressure: up to 10 bar. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Actuator with double piston rod series TWNC

          All products | Pneumatic actuators
          0 €
          Actuator double-acting operation with passing double piston rod It can be used as element actuating in systems, in which required is protection against rotation. W the scope dimensions axial compliant with the standard ISO 15552. standard configuration with magnet and cushioning. Piston diameter: Ø 32, 40, 50, 63, 80, 100 mm. Maximum, recommended length stroke: od 25 for 500 mm. Working pressure: up to 10 bar. sealing: polyurethane. medium working: filtered compressed air, oiled or non-oiled. force produced at 6 bar extension/return: Ø 32 - 434/350 N, Ø 40 - 678/597 N, Ø 50 - 1060/940 N, Ø 63 - 1683/1471 N, Ø 80 - 2714/2295 N, Ø 100 - 4241/3812 N. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A bracket model BC for mini actuator ISO 6432. W set with 1 pin and 2 rings securing. size actuator: Ø8, Ø10, Ø12, Ø16, Ø20, Ø25. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A bracket model BC for actuator cylindrical series RNDC. supplied together with with 2 screws. size actuator: Ø32, Ø40, Ø50. Material: steel carbon, galvanized.
        Go to Top