- Home
- Pneumatics
- Pneumatic valves
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a plunger of assist, for control panel. used most often for control operation actuators. during mounting required is always Adapter MW-035100005. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NMC series COMPACT "N" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve type 6560 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical. Material: body - brass nickel-plated, the ball: brass chrome-plated. sealing: the ball - teflon, spindle - NBR. Operating temperature: od -20°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMiniature valve intended for installation pneumatic, with connections push-in for direct mounting on hoses with plastic o calibrated diameter outer. functionally similar for a ball valve (shut-off flow through rotation a knob o 90º), is however miniature three-way valve spool (3/2) with venting – should go mount in accordance with direction flow marked on body. Po cut-off supply configuration za valve is vented through holes is found in on the top a knob, thanks to which possible is performing repairs and maintenance the system. Material body: plastic plastic. Material spool: brass. seal: O-ring with NBR. Operating temperature: od 0⁰C for +60⁰C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever 90°, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position or 5/3 - five-way, three-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA mini valve poppet, directional o control mechanical, used most often for control operation actuators. can be mounted in any position. Do actuation valve needed is low force. Function 3/2 NO and NC - three ways flow, two position. Connection: M5 female, coupling push-in Ø4 and Ø6 (axially or on the side). Control: pusher, pusher for mounting panel, lever with a roller, lever with a roller single-acting operation. Material: body valve - aluminum, pusher - brass nickel-plated, sealing - NBR, spring - steel stainless. Flow rate nominal: 60 l/min (at an inlet pressure of 6 bar Δp = 1 bar). force actuation (pusher at 6 bar): 8 N. Working pressure: od 0.5 up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NTC series COMPACT "N" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. size the directional valve: 1/8", 1/4", 3/8", 1/2". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-U with valve check with thread internal used mainly as valve safety. Po mounting on connections supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever 90°, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Size: 1/8", 1/4" or 1/2". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OMC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve with connection NAMUR adjustable electrically, serves for control drives pneumatic. Ich Connection allows on mounting valves directly on body actuators. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - Hostaform®. Working pressure: 2.5 ÷ 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 1100 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check series VNR enabling Flow rate air only in one direction. Working pressure: 2 ÷ 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass OT58. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NMV series COMPACT "N" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OTC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle type MRF NMB series COMPACT "N" used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check series RFL type U, regulating value flow air only in one direction. serves for regulation speed working equipment actuating in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Material body: aluminum. Material housing: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a plunger of assist, for control panel. used most often for control operation actuators. during mounting required is always Adapter MW-035100005. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve alloy series STP-B with thread internal is valve controlled pneumatic. allows on Flow rate air through valve po simultaneous applying pneumatic signal control (the pilot). W case loss signal control valve is closed in both directions flow. valve STP-B mounted in the connection supply actuator causes, at the absence pressure on the connection control (the pilot), stopping movement actuator. use valves STP-B as valves safety should be preceded appropriate analysis risk the system pneumatic or the entire devices. Working pressure: 0.5÷10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve fast trigger serves for increasing speed actuator through fast discharge air. Body material: brass nickel-plated. Material cover: brass nickel-plated (1/8" ÷ 1/4"), aluminum anodized (1/2"). gasket flat: NBR. gasket lip: polyurethane. maximum pressure: 12 bar. minimal pressure: 0.5 bar. Operating temperature: od 0°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve directional electric, without a coil control PIV for mounting in-line. is to element pneumatics, which task is Control direction flow the medium working in pneumatic systems drive and control through connection or switching ways flow. appropriate for use with high frequency and short sometimes response. possible assembly in any position. Material body valve: aluminum. thread connection: M5 female, female BSP1/8”. medium working: filtered compressed air, oiled or not oiled. maximum Working pressure: from 6 bar to 30 bar, depending on kinds valve and a coil. Operating temperature: -15°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF OFC series COMPACT "O" for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling with thread internal. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control manual, a lever front, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a rod resilient of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF HTC series HIGH-FLOW for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. recommended for applications demanding high value flow both during filling as and venting. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever with a roller of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle series RFL type B, regulating value flow air in obu directions. serves for regulation speed working equipment actuating in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Material body: aluminum. Material housing: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight valve foot with cover protective and sockets in plane face, serves for control foot through the operator devices in systems pneumatics. Connection: 1/4". Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 840 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off alloy series STP-B of couplings push-in used mainly as valve safety. Po mounting on connections supply actuator allows on Flow rate air only in the presence pneumatic signal control. actuator is stopped po a drop pressure control. Working pressure: 0.5 ÷ 10 bar. Operating temperature: od -10°C up to +60°C. Body material: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve throttle check type MRF NTV series COMPACT "N" for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off 3/2 used as valve switching and venting installations pneumatic. when sleeve control shifted is for the back, then configuration pneumatic is vented, a when sleeve is shifted for the front, to configuration pneumatic is pressurized. Working pressure: 10 bar. Operating temperature: od -10°C up to +80°C. Body material: brass chrome-plated.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal valve directional o control mechanical, a lever front with a roller, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.



















































