0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Grease nipple hand lever 75/PK silver 500 g. with a hose Ø 11 mm and fitting hydraulic. Material body: steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Sapphire nozzle screw-in, type 965

          All products | UHP adapters and accessories
          0 €
          High quality sapphire nozzle for equipment high-pressure. maximum Working pressure: 3000 bar. Operating temperature: up to +150°C. torque tightening : max. 25.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Silencer with a throttle trigger MWSVE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 25 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Material spring: steel stainless. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting Tee "T" with thread external BSPT type B7 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee "T" with thread external BSPT type C7 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee with thread internal BSP, cast iron, type 130/25

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Tee with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ferrule for hoses thermoplastic UHP, steel carbon, type PSAF

          All products | UHP thermoplastic hoses and fittings
          0 €
          Ferrule PSAF for hoses thermoplastic UHP. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-S o wide tape 12 mm is characterized greater strength, higher permissible torque tightening od clamps ASFA-L (9 mm), guaranteeing strong clamp and is recommended for heavier applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: galvanised carbon steel (W1).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality hose A universal intended for air, cold and hot water, oil, liquids hydraulic, light chemicals, diluted acids, liquids cleaning. strong and flexible, resistant to twisting and kinking. Layer outer non-staining, resistant to conditions weather, abrasion and oil. Due to high strength and low extensibility especially recommended for hose reels drum. The hose is non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: blue (red for diameter 15.9 mm) blend rubber Chemivic® (NBR/PVC). Working pressure: 21 bar. Operating temperature: od -29°C up to +88°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colorless, transparent, strong and flexible hose made with polyester - polyurethane, free of plasticisers, exceptionally resistant to abrasion and tearing, is characterized flexibility even in low temperatures and withstands cyclic changes temperatures. hose manufactured is in strict tolerances dimensional batch for batch, co ensures safe, repeatable connection with fitting. resistant to oils, greases and fuels and range chemicals. strength on conditions atmospheric and intensive daily use. found use in many branches industry: installations fuel and lubricating, for liquids cooling in automotive, for air in pneumatics and automation industrial, for conveying products abrasive and viscous, sludge and powders and as A guard cables electric. length full roll hose 30 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: tygothane® - polyurethane-polyester (PU). Operating temperature: od -73°C up to +79°C (momentarily up to +93°C). temperature brittleness: -73°C. Hardness: 82° Shore (A). Density: 1.20 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, aldehydes, alcohols industrial and glycols. basic, classic rubber hose chemical. often used in plants industrial and treatment plants for discharge contaminants water and water process. appropriate also for water sea. Layer inner with antistatic (R ≤ 10 6 Ω/m) rubber EPR (other marking: EPM). Reinforcement with high-strength cord. Layer outer with rubber antistatic (R ≤ 10 6 Ω/m) EPR (EPM) resistant to chemicals, abrasion, ozone and conditions atmospheric. Layer inner and outer antistatic. Inner layer: black rubber EPM (EPR). Reinforcement: cord synthetic. Outer layer: black rubber EPM (EPR). Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for washer pressure CLEANY HOSE

          All products | Low-pressure cleaning and washdown hoses
          0 €
          Flexible hose intended for washing cold and warm water and light chemicals. recommended for use in industry food. compliant with the European requirements for substances food 1935/2004 CE and 2007/19/CE (simulant fluids A, B, C). can use fittings combined TR-THERMO-12-BZ130-08-SS and TR-THERMO-12-BZ140-08-SS. Inner layer: grey, smooth PVC. Reinforcement: double polyester braid. Outer layer: blue PVC. Working pressure: 80 bar. Operating temperature: od -10°C up to +80°C (for 80 bar for +50°).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for extraction chips wood SMARTFLEX® 1.0

          All products | Ducting and ventilation hoses
          0 €
          Medium wall thickness, strong and flexible hose intended for discharge sawdust, chips, offcuts, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. less pliable and compressible than SMARTFLEX® 0.4, 0.6 and 0.7, za to smooth inside, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.0 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hydraulic hose EN 856 HI-PULSE 4SP

          All products | Hydraulic rubber hoses
          0 €
          A general-purpose hydraulic hose. Increased hose service life relative to the standard, confirmed by a test of 1.000.000 pulse cycles. Flame-retardant outer layer (MSHA). standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: four layers of steel wire. Outer layer: black, oil-resistant synthetic rubber. Pressure working: from 180 bar to 460 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C (momentarily +120°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic nylon DIN73378, PA6

          All products | Pneumatic hoses
          0 €
          Light, flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. Hose material: polyamide PA 6 (nylon). Working pressure: from 11 bar to 40 bar (depending on the diameter hose). Operating temperature: od -10°C up to +80°C. standard: DIN 73378.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very flexible, lighter od rubber, hose suction-delivery intended for conveying water, sewage, sludge and dry bulk materials. used for systems irrigation, loading and unloading tankers, in installations industrial, etc. retains high flexibility at sub-zero temperatures ambient. smooth inner and outer wall facilitates maintaining hose in purity and increases flow capacity unloading o 20%. is resistant to conditions atmospheric and abrasion. hose Available also in straight, not bent in coil sections 3 for 6 m. Inner layer: black PVC. Reinforcement: a polyester braid, galvanised steel spiral. Outer layer: black PVC. Working pressure: from 5 bar to 16 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible hose suction-delivery intended for water, juices, drinks, beer, wine, alcohols o a concentration up to 20% and other products food. not recommended for milk and its dairy products, oils and greasy substances food. Reinforcement spiral with hard PVC, resistant on impact, ensures good strength on vacuum and kinking hose. transparent wall allows on easy visual control of the flow. A smooth inner surface reduces flow losses and ensures ease of cleaning. surface outer lightly corrugated. W use not regarding direct contact with food (in industry, construction, agriculture) It can be used: 1) for light chemicals, water, sludge and sewage, other liquids (without fat, oils and hydrocarbons); 2) for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (not greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 2 bar to 7 bar, depending on the diameter hose. Operating temperature: od -10°C up to +55°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tube silicone VERSITEC

          All products | Silicone hoses
          0 €
          Hose made in accordance with technology improvement peroxide hydrogen. resistant to radiation UV, oxygen and ozone. Widely used in industry and equipment AGD. sterilization steam, oxide ethylene or radiation. Meets FDA requirements and BfR. Material: semi-transparent silicone. Hardness: 57° Shore (A). Density: 1.15 g/cm³. Operating temperature: od -50°C up to +200°C (momentarily +220°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 standard, polyamide, type 101

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 101 made in accordance with the standard DIN 3015. Dla group dimension 0 occurs one hole under bolt, for group dimension 1 ÷ 6 available two holes under screws. standard has profiled (grooved) surface hole for a pipe. Material the insert: self-extinguishing polyamide. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug 90° WEO with fitting for hose, hardened steel, series 714

          All products | Fittings for high-pressure hoses
          0 €
          Plug 90° WEO with fitting for hose for use in systems hydraulic tam, where not has sufficiently much space, to install line in traditional way. Po connection plug has freedom of movement movement in the socket, co prevents twisting lines in during mounting. intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for size hose for 3/4"), 250 bar (for size hose 1"). Material: hardened steel. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling CEJN 116 with thread external without valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1500 bar (coupling connected). pressure bursting: 3000 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality plug water quick coupling NiTO 1/2" with thread external, for gun Heavy Duty. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Foam generator LS 3

          All products | Guns for high-pressure washers
          0 €
          The LS 3 foam generator for pressure devices, intended for touchless washing. A 1 l polyethylene tank is equipped with a brass injector for generating foam. Diameter nozzle: 1.25 mm. Working pressure: 180 bar. max. Flow rate: 20 l/min. Operating temperature: +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug cap CAMLOCK DC, aluminum

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Plug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4" for 4" - Levers made of brass). Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality two-way ball valve type SKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures should consult with Tubes International. pressure working dependent od material seal valve. Material: steel (body, ball, stem). seal: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C (FKM).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling low-pressure HAMMER LUG type 100 for general applications. widely used for conveying air, water, oil and gas. set: part male, female + A nut. color: yellow (part male, female), black (A nut). Material: steel carbon A105. Connection: NPT female. sealing: metal/metal (cone). pressure: 1000 PSI (69 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling IBC with a thread trapezoidal external compliant with the DIN EN 12713 standard and with a thread internal. The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling socket-push-in STECKO, steel free-cutting

          All products | Fittings for high-pressure hoses
          0 €
          Coupling socket-push-in STECKO for use in systems hydraulic for mining. Material: steel free-cutting, galvanized. sealing: NBR (O-ring), teflon (ring thrust).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in straight with thread internal, type R2, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter with thread external and thread internal BSP type A4/Z, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A coil 30 mm for valves PIV.B

          All products | Equipment for pneumatic valves
          0 €
          A coil 30 mm for valves PIV.B. Insulation class: F180. Voltage tolerance: -10% for +15%. Protection degree: IP65 EN60529 with a connector.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling NiTO of steel stainless AISI 316L with thread external. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Not can connect directly element with various systems e.g. socket 1/2″ with a plug 3/4″. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: od -20°C up to +150°C. Material seal: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket coupling CAMLOCK D with a thread internal, aluminum

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4" for 4" - Levers made of brass). Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket coupling dry-break DRY-MATE with thread internal of steel stainless AISI 316. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not It is intended for media gas. installed od side hose (part hose). The design socket based is on a valve ball, which ensures completely unobstructed Flow rate. socket supplied in set with caps with polypropylene. Coupling material: body - steel AISI 316, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE, coupling - Viton (available EPDM and kalrez). Working pressure: up to 7 bar. Operating temperature: up to 150°C. Maximum leakage: 1 ml (1") and 2 ml (1.1/2" and 2").
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very Light, flexible hose delivery, flat-folding, for water for hydrants and equipment being on equipment services firefighting. supplied with mounted couplings with aluminum type STORZ (complete line), compliant with conditions technical regulation MSWiA with 27.04.2010 r., has certificate approvals CNBOP-PIB. hose hydrant compliant with the standard EN 14540 used is in hydrants internal acc. to EN-671-2. hose for pumps used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used in industry, construction, agriculture and mining. Available also in version yellow luminescent (DN52, DN75, 20m, for pumps). can serve for conveying water, water sea, water industrial, solutions some substances chemical. Inner layer: insert PVC (PU for DN110). Reinforcement: a polyester braid. Working pressure: od 12 bar for 15 ba - depending on the diameter hose. Operating temperature: od -30°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 90° with thread internal BSP/external BSPT, cast iron, type 92/7

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Elbow 90° with thread internal BSP and thread external BSPT for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hose 90° with thread 11/16″-18 UNF enabling connection fitting for socket type 2HG or 2HL quick coupling Hansen Beverage. Working pressure: 15 bar. Operating temperature: up to +130°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic AGN for hose UHP steel carbon, type PNZ110

          All products | UHP thermoplastic hoses and fittings
          0 €
          A fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread external NPTF, sealing on the thread using tape PTFE or sealant in flows (AGN). Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting straight ORFS INTERLOCK UNF female, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting straight ORFS INTERLOCK with a female UNF thread, sealing flat, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting with thread external BSP for hose, brass, NiTO type A

          All products | Low-pressure fittings and adapters
          0 €
          Brass A fitting for hose, NiTO type A with thread external BSP with seal flat. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
        Go to Top