- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling full-bore Nitto Kohki series TSP CUPLA with thread internal BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. especially recommended for liquids o high viscosity e.g. greases. Material: steel carbon. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling full-bore Nitto Kohki series TSP CUPLA with thread external BSPT o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. especially recommended for liquids o high viscosity e.g. greases. Material: steel carbon. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling full-bore Nitto Kohki series TSP CUPLA with fitting for hose o excellent durability, intended for water, oils hydraulic, steam, chemicals, air and gases. especially recommended for liquids o high viscosity e.g. greases. Material: steel carbon. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: od -20°C up to +80°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN series 320 (DN 7.6) in version VS (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with fitting for hose o versatile use in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. made in accordance with Eurostandard 7.6. Working pressure: 12 bar (Safety factor 4:1). flow capacity: 1900 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN DN10.4 in version ESAFE (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with thread external BSPT or with thread internal BSP. versatile used in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. made in accordance with Eurostandard DN10. Working pressure: 16 bar. flow capacity: 4000 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN DN10.4 in version ESAFE (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with fitting for hose. versatile used in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. made in accordance with Eurostandard DN10. Working pressure: 16 bar. flow capacity: 4000 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN series 310 (DN 5.3) in version STANDARD with thread external BSPT or NPT o versatile use in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. made in accordance with the standard ISO 6150B and A-A59439 (former standard U.S. MIL C4109 1/4″). threads external coated are agent sealing. Working pressure: 16 bar. pressure bursting: 140 bar. Operating temperature: od -20°C up to +100°C. flow capacity: 925 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN DN5.3 in version ESAFE (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with thread external BSPT or internal BSP. versatile used in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. Working pressure: 16 bar. flow capacity: 950 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN DN5.3 in version ESAFE (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with fitting for hose. versatile used in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. Working pressure: 16 bar. flow capacity: 950 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN DN7.6 in version ESAFE (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with thread external BSPT or internal BSP. versatile used in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. made in accordance with Eurostandard DN7.2. Working pressure: 16 bar. flow capacity: 2250 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN DN7.6 in version ESAFE (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with fitting for hose. versatile used in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. Made in accordance with Eurostandard 7.2. Working pressure: 16 bar. flow capacity: 2250 l/min (Pe=6 bar, Δp=0.5 bar - air). Material: brass/steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN series 320 (DN 7.6) in version VS (disconnected without pressure, for avoiding danger recoil, compliant with the standard ISO 4414 and EN 983) with thread external BSPT o versatile use in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. made in accordance with Eurostandard 7.6. Working pressure: 12 bar (Safety factor 4:1). flow capacity: 1900 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling CEJN series 410 (DN 10.4) in version STANDARD with fitting for hose o versatile use in industry, mainly in installations pneumatic. operated one hand at minimum force required for connections. Working pressure: 16 bar (factor safety 8.75:1). flow capacity: 3900 l/min (Pe = 6 bar, Δp = 0.5 bar). Material: steel galvanized. sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling double o free flow intended for cold and hot water. Material: brass (balls, spring - steel stainless). Working pressure: 16 bar. sealing: EPDM (with approval KTW, DVGW W270 for water potable). Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling measurement SNAP-CHECK production Swedish intended for measuring pressure in systems hydraulics power. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug possible is under pressure up to 300 bar. pressure working for disconnected with socket plug is 600 bar, a minimal pressure bursting 2400 bar. pressure working for connected socket and plug is also 600 bar, whereas minimal pressure bursting to 1300 bar. precision made quick couplings, ensures tightness and reliability points measurement the system hydraulic. range connections for plugs measurement allows easy configuration connections. socket quick couplings, supplied are standard in set with red caps with plastic. Working pressure: 600 bar. pressure switching: up to 300 bar. Material body: steel galvanized. sealing: NBR. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA QC6 quick coupling socket compliant with the Standard Instrumentation standards, with valve, with thread external NPT, BSPT or BSP. QC4 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. Material: steel AISI 316. Working pressure: 103 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA QC6 quick coupling socket compliant with the Standard Instrumentation standards with valve, with connection LET-LOK®. QC6 is to high class quick coupling used m.in. in aviation, industry gas, medical, pharmaceutical, laboratories. all quick coupling are factory tested at a pressure of 68 bar in order to checking tightness. interchangeable with quick coupling standard Instrumentation other manufacturers. Material: steel AISI 316. Working pressure: 103 bar. sealing: Viton. Operating temperature: od -26°C up to +204°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling SNAP-TITE with thread internal BSP and NPSF production American, without valve. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Working pressure: up to 690 bar (depending on size quick coupling), Safety factor 2:1. Material: steel AISI 316. sealing: NBR (Operating temperature: od -35°C up to +120°C), Viton (Operating temperature: od -26°C up to +204°C). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling SNAP-TITE with thread internal BSP production American is characterized unique design valve, co allows on achieving laminar flows. depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). Working pressure: up to 345 bar (depending on size quick coupling), Safety factor 2:1. Material: steel AISI 316. sealing: NBR (Operating temperature: od -35°C up to +120°C), EPR (Operating temperature: od -56°C up to +120°C), Viton (Operating temperature: od -26°C up to +204°C). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling SNAP-TITE with thread internal BSP production American is characterized unique design valve, co allows on achieving laminar flows. depending on use should select appropriate Material coupling and seal. standard: MIL-C-51234. Application: hydraulics power (oil hydraulic), industrial (water, steam, fuels and oils, gases chemicals). Working pressure: up to 448 bar (depending on size quick coupling), Safety factor 2:1. Material: steel carbon, galvanized. sealing: NBR (od -35°C up to +120°C). Flow rate has been stated for a drop pressure 3 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket MH-24 quick coupling with thread internal BSP for lances, guns and hoses high-pressure. Material: steel stainless. Working pressure: 400 bar. Operating temperature: +160°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with thread internal BSP and with valve intended for cold and hot water. A double-sided gasket socket seals both plug as and connection threaded with installations, co ensures high service life. Material: brass (balls, spring - steel stainless). Working pressure: 16 bar. sealing: EPDM (with approval KTW, DVGW W270 for water potable). Operating temperature: up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with thread internal BSP, with valve and without valve shut-off, resistant to radiation ultraviolet, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. ergonomic shape and large button release consists of o convenience handling and ease use. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. is characterized high mechanical strength and resistance chemical. They are suitable for autoclaving. length L - length total. Material: polysulfone UV. sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: od -40°C up to +138°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with thread internal BSP, with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. ergonomic shape and large button release consists of o convenience handling and ease use. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. is characterized high mechanical strength and resistance chemical. They are suitable for autoclaving. length L - length total. Material: polysulfone. sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: od -40°C up to +138°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with thread internal BSPT o excellent durability and resistance to vibration. intended for installation water. Material: brass. Working pressure: 10 bar. Operating temperature: od -20°C up to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with valve Nitto Kohki series HI CUPLA with thread external BSPT o excellent durability and resistance to vibration. intended for connecting tools pneumatic with installations air. Material: steel AISI 304. Working pressure: 15 bar. Operating temperature: od -20°C up to +80°C (NBR). flow capacity: 4000 l/min (1″), 3200 l/min (3/4″), 2600 l/min (1/2″), 1600 l/min (3/8″), 1000 l/min (1/4″) at a pressure of 5 bar. Note: the medium must flow from the socket to the plug.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with thread external NPT, without valve intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. The design ich allows on easy operation one hand, a characteristic click allows have certainty effective connections. available are also versions with valve and in color black. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: acetal. Working pressure: for 6.9 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with thread external NPT, without valve intended for printing installation inkjet, blood, liquids cooling, chromatography gas, etc. connection consists in on turning relative to each other two parts coupling. The design ich allows on easy operation one hand, a characteristic click allows have certainty effective connections. nominal size quick coupling: DN 1.2 mm. length L - length total. Material: polypropylene. Working pressure: for 6.9 bar. Operating temperature: od 0°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate socket quick coupling with thread external NPT intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. characteristic The design (not contains balls and ferrule protective) allows on easier, secure connection and disconnection one hand. An audible click signals a successful connection. length L - length total. Material: acetal. sealing: O-ring with NBR. Working pressure: for 8.3 bar. Operating temperature: od -40°C up to +82°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium rate socket quick coupling with thread external NPT intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. characteristic The design (not contains balls and ferrule protective) allows on easier, secure connection and disconnection one hand. An audible click signals a successful connection. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage without valve with thread external UNF 11/16″-18. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with thread external UNF 7/16″-20 of a cone 90°. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with valve with thread external UNF 11/16″-18. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket WEO with fitting for hose for use in systems hydraulic tam, where not has sufficiently much space, to install line in traditional way. intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for size hose for 3/4"), 250 bar (for size hose 1"). Material: hardened steel. Operating temperature: od -30°C up to +100°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket with a shut-off valve quick coupling diagnostic, with thread external NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable of couplings other manufacturers. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK BR (reducing) with a BSPT male thread made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum. Levers: steel AISI 304 (in sizes 1.1/4" for 4" - Levers made of brass). Sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket lever coupling ANFOR with thread external BSP for use between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel galvanized. sealing: rubber NR/SBR. Working pressure: from 5 bar to 19 bar (depending on the coupling size). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA BAUER lever coupling socket with thread external BSP with wide application between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: NR/SBR. Working pressure: 20 bar (for size 89 mm), 12 bar (for size above 89 mm). Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA FERRARI lever coupling socket with a flange PN10, type F.45, for use between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: rubber NR-SBR. Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA KLAUDIA lever coupling socket terminated with a flange PN10 with wide application: for unloading cement wagons, in installations wellpoint IGE (installations for dewatering soil), agricultural holdings, tankers, installations rain guns, industry and construction. Material: aluminum. sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: od -25°C up to +60°C.



















































