0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A KLAUDIA lever coupling socket with a butterfly valve terminated "tail" for hose with wide application: for unloading cement wagons, in installations wellpoint IGE (installations for dewatering soil), agricultural holdings, tankers, installations rain guns, industry and construction. standard contains a gasket 89 mm. Material: aluminum. sealing: EPDM. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: od -25°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling socket with thread external BSP with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling socket with a flange PN 10/16 with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling socket with thread external BSP with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel AISI 316L. sealing: SBR. Working pressure: up to 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling socket with fitting machined for hose with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: SBR. Working pressure: up to 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket coupling dry-break DDC with thread internal BSP of steel stainless widely used in transport road, railway, marine, aviation and in industry petrochemical, chemical and pharmaceutical. installed od side hose (part hose). head socket is rotational (360°). meets all requirements regarding safety, protection environment natural and reliability at transferring hazardous, toxic or costly liquids. made acc. to standard NATO STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). coupling meet requirements ATEX, TDT, ADR, RID, IMDG, the directive pressure 97/23/WE. has also recommendation council european industry chemical CEFIC. sealing: O-ring (Viton), gasket flat (PTFE). Working pressure: 25 bar. Operating temperature: od -25°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket (part hose) coupling dry-break DRY-LINK. coupling have unique construction ensuring safe and completely Leak-free connection installation (amount medium remaining on surface valve po disconnection is immeasurable). coupling DRY LINK is characterized: small weight, small dimensions and compact design - co allows easy operating in tight spaces; swivel Connection socket coupling (parts hose) – facilitates setting socket for connections with a plug and secures against twisting hose; ease operation through trained the operator, difficulty disconnection through accidental persons; large, unobstructed Flow rate through coupling at small a drop pressure – thanks to thin disks valves set parallel for flow; ease cleaning, smooth bore internal (polished in version SANITARY), small amount parts internal, no dead space – coupling DRY LINK are ideal for liquids o high viscosity and applications demanding high level purity (substances food, pharmaceutical, cosmetic, paints, adhesives); coupling DRY LINK can be also used for powders and in industry petrochemical. Material: steel AISI 316. sealing: PTFE, Viton, EPDM or chemraz®. Connections: BSP female or NPT. Working pressure: 14.3 bar for couplings DN25 and DN40, 10.3 bar for couplings DN50, 8.3 bar for couplings DN80. Vacuum: for 0.94 bar. Operating temperature: od -29°C up to +110°C (Viton, EPDM, chemraz®); od -7°C up to +110°C (PTFE).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket coupling dry-break DRY-MATE with thread internal with polypropylene. used in industry chemical, pharmaceutical, agriculture and systems transfer. Not It is intended for media gas and liquids o low the point ignition. installed od side hose (part hose). The design socket based is on a valve ball, which ensures completely unobstructed Flow rate. socket supplied in set with caps with polypropylene. Material: body - polypropylene glass-fiber-reinforced, ball - PTFE, latch CAMLOCK - steel AISI 316. sealing: valve - PTFE, coupling - Viton (available EPDM and kalrez). Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at pressure working 5 bar). Maximum leakage: 2 ml.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thick, heavy fabric glass coated single-acting thick layer silicone, o basis weight 3260 g/m 2. has high properties insulating and excellent resistance to flame and on abrasion. resistant to water, moisture and oils hydraulic. used in steelworks, smelters metals and glass, foundries - splashes molten metal, glass not adhere for cover. Material: fabric glass coated silicone. Operating temperature: od -54°C up to +260°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very thick A guard hoses, cables and pipes in the molds sleeve. resistant to flame, abrasion and oils. used also for cover installation steam and hot oil - protects against burns and losses energy. use tej cover can reduced external temperature hose for steam with +194°C up to +54°C. wall thickness nominal wall: 5.08 mm. very good resistance to moisture, makes that can be used also on outside. Material: fiber glass coated silicone in color blue. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes; up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Angle bracket fixing SQU L

          All products | Functional fittings
          0 €
          Angle bracket intended for mounting for plates products with series Line On Line. supplied with two screws M3x16 (for LOL 4), two screws M3x25 (for LOL 6 and 8), two nut M3 and four washers. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Padlock for valve for compressed air, series SYNTESI®

          Air preparation elements (FRL) | All products
          0 €
          Padlock protecting against unauthorised change setting valve reducing or switching on valve shut-off - for series Syntesi®.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench for removal bowl BIT/SY1

          Accessories for FRL | All products
          0 €
          Wrench for removal bowl BIT/SY1, system SYNTESI. Material: steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench for fittings hygienic RJT, aluminum, type RK

          All products | Hygienic stainless steel couplings
          0 €
          Wrench for use with various couplings hygienic type RJT. Available in sizes: 1", 1.1/2", 2", 2.1/2", 3" or 4". Material: aluminum.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench for fittings fire STORZ, size 150/125, steel

          All products | Symmetrical claw couplings
          0 €
          Wrench assembly for fittings fire STORZ of size 150 and 125. Material: steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench for fittings fire STORZ, size 250/205, steel

          All products | Symmetrical claw couplings
          0 €
          Wrench assembly for fittings fire STORZ of size 250 and 205. Material: steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Wrench assembly for fittings fire STORZ o sizes 65 and 38. Material: malleable cast iron.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench for fittings fire STORZ, size D, steel

          All products | Symmetrical claw couplings
          0 €
          Wrench assembly for fittings fire STORZ of size D (25). Material: steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench assembly type TS for fittings TW DIN 28450, steel carbon

          All products | Tankwagen couplings and ECTFE-lined couplings
          0 €
          Wrench assembly type TS for fittings TW (tankwagen). Material: steel carbon.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Wrench pneumatic, series 741

          All products | Special air guns
          0 €
          High quality wrench pneumatic intended for mounting and removal wheels vehicles - for stations service, plants vulcanising, workshops automotive. used also as tool assembly at structures steel, machines etc. meets requirements contained in the directive machine 2006/42/CE. set wrenches socket o sizes 17, 19 and 21 mm should treat as separate assortment. basic features: double mechanism impact TWIN HAMMER, housing made with materials composite, A handle coated plastic anti-vibration, low level noise - 83dB(A), three-position regulator torque swivel. W set plug quick coupling EUROSTANDARD DN 7.2. medium wear air: 113 l/min. Working pressure: 6.2 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 45° with EPDM for the system cooling RADIATOR SAE J20 R4

          All products | Automotive hoses and hose connectors
          0 €
          Elbow 45° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. available with arms o length 200, 250 and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter elbow. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow 90° of steel stainless type 62510 with thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow IBC 90° with a thread internal BSP, polypropylene

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Elbow 90° IBC with a thread internal BSP. Material: polypropylene. Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow through-flow, HP type 40130

          All products | Push-in fittings
          0 €
          Elbow through-flow for connecting hoses with plastics (for hoses polyurethane required minimum Hardness per Shore (A): 98°). Material: brass nickel-plated. Operating temperature: od -15°C up to +130°C. Working pressure: 30 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow 90° lever coupling FERRARI on one side terminated socket, a with the other a plug coupling, type F.25, for use between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: rubber NR-SBR. Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow 90º with thread internal BSP, series 3F type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow 90º with thread external and internal BSP, series 3F type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nipple angled 90º with thread external BSP, series 3F type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Material: polypropylene, PVDF. Working pressure: 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow silicone 135° reinforced polyester, E135, blue

          All products | Automotive hoses and hose connectors
          0 €
          Elbow silicone 135° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Standard arm length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange split SAE version light, steel AISI 316L

          All products | Fittings for high-pressure hoses
          0 €
          Flange split SAE 3000 with holes under bolt hex socket DIN 912; version light. allows easy assembly adapters flange or hose (tubes) with fitting flanged. Material: steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixing actuator pneumatic, for mounting for cover rear or front actuator. allows on fixed mounting actuator in machines and equipment. range diameters actuators: 32 mm ÷ 125 mm. W set: 4 screws mounting. Material: galvanised carbon steel (flange, screws and washer).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange fixing for actuator, model C, oval

          All products | Pneumatic actuators
          0 €
          Flange fixing actuator pneumatic, for mounting for cover rear or front actuator. allows on fixed mounting actuator in machines and equipment. size actuator: Ø8 ÷ Ø25. Material: galvanised carbon steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange solid SAE version heavy, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          Flange solid SAE 6000 with four holes under bolt hex socket DIN 912; version heavy. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange fixed PN16 for hose, steel carbon, type CNWF

          All products | Low-pressure fittings and adapters
          0 €
          Flange fixed PN16 type CNWF of carbon steel with "tail" for hose. intended for hoses rubber and plastic hoses industrial. assembly using bands or straps clamping. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixed made is acc. to standards EN1092-1, with weld-neck for welding type 11B, surface sealing type B1 and pressure nominal PN16. coupling flange is one with most widely used in industry, primarily for connecting sections pipelines process, ale also for connections with hoses flexible. thanks to special construction creates tight and solid joint, guaranteeing excellent parameters and reliability entire installation. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixed made is acc. to standards EN1092-1, with weld-neck for welding type 11B, surface sealing type B1 and pressure nominal PN16. coupling flange is one with most widely used in industry, primarily for connecting sections pipelines process, ale also for connections with hoses flexible. thanks to special construction creates tight and solid joint, guaranteeing excellent parameters and reliability entire installation. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixed made is acc. to standards EN1092-1, with weld-neck for welding type 11B, surface sealing type B1 and pressure nominal PN16. coupling flange is one with most widely used in industry, primarily for connecting sections pipelines process, ale also for connections with hoses flexible. thanks to special construction creates tight and solid joint, guaranteeing excellent parameters and reliability entire installation. Material: steel AISI 321.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flange fixed made is acc. to standards EN1092-1, with weld-neck for welding type 11B, surface sealing type B1 and pressure nominal PN16. coupling flange is one with most widely used in industry, primarily for connecting sections pipelines process, ale also for connections with hoses flexible. thanks to special construction creates tight and solid joint, guaranteeing excellent parameters and reliability entire installation. Material: steel carbon.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A compact Gun with aluminum for pumping wheels AIRMASTER

          All products | Tyre inflation guns and equipment
          0 €
          Made with resistant to deformations aluminum light and handy Gun for pumping wheels air and nitrogen in version PREMIUM – calibrated (* - version STANDARD without calibration); re calibration po two years (directive 86/217/EWG). Do all standard valves for tyres VG 8 (cars passenger, motorcycles, bicycles etc.). equipped in shockproof analogue pressure gauge 63 mm, Class accuracy - 1.0 compliant with DIN EN 12645, (for model STANDARD without calibration – 1.6), in cover rubber with double scale measuring (bar, psi). filling wheel takes place through maximum pressing lever, bleeding air through pressing lever for half. Do connection for wheel serves rubber hose o length 500 mm mounted coupling swivel for gun. depending on version hose terminated is one with three types ends: lever, crimp or push-in double-sided (ideal for wheels twin). good solution for workshops automotive and stations service. replacement pressure gauge causes expiry features calibration gun and is the need carrying out new calibration!. Material gun: aluminum (body, lever). sealing: NBR, PU. Working pressure: 10 bar. Operating temperature: od -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight, A universal, one-piece A mini valve ball shut-off for applications industrial. body made with hexagonal the rod with brass, nickel-plated, with a lever aluminum painted on black. ball with brass chrome-plated seated in seats with PTFE. stem with brass, with seal o-rings with NBR, has protection against blow-out. valve MINI It can be used for air, gases neutral, water, chemicals, products petrochemical etc., free od contaminants solid, compliant with resistance chemical materials valve. meets requirements the directive pressure PED 2014/68/UE, in the scope sound practice engineering (SEP), in accordance with art. 4 ust. 3 (without markings CE). compliant with the directive material RoHS 2011/65/UE and the regulation REACH 1907/2006. the given minimum temperature use refers to valve emptied with liquids freezing. Kv - factor flow valve expressed in units metric (Flow rate water in m 3 on hour at a drop pressure o 1 bar). Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material stem: brass. Material lever: aluminum. sealing the ball: PTFE. sealing stem: 2 x O-ring NBR. Connection: thread BSP (ISO 228-1). Operating temperature: od -10°C up to +90°C.
        Go to Top