0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality high-pressure ball valve two-way closing intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: inch LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality high-pressure ball valve two-way closing intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: metric LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality high-pressure ball valve three-way switching with lower inlet (only switching, without cut-off) intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing, high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: NPT female. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality high-pressure ball valve three-way switching with lower inlet (only switching, without cut-off) intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing, high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: inch LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality high-pressure ball valve three-way switching with lower inlet (only switching, without cut-off) intended for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line or panel. valve is characterized high tightness closing, high durable and low torque swivel. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). available valves with drive pneumatic. occurs in two versions pressure: o maximum pressure working appropriate 206 bar and 413 bar. Body material: AISI 316 steel (ASTM A351 CF8M, cast) - for version 206 bar; steel AISI 316 (ASTM A-276, forging) - for version 413 bar. Dla version low-pressure (206 bar) available is made with brass. Material the ball: steel AISI 316. Material lever: nylon, insert with brass; lever valve standard in color black (available other color, lever metal, lever with padlock ISLT). sealing the ball and stem: modified PTFE (option PCTFE, PEEK). pressure working (dependent od temperatures / material seal - see chart): up to 206 bar (modified PTFE). temperature use (dependent od material seal - see chart): od -34°C up to +210°C (modified PTFE). Connection: metric LET-LOK®. notes! The ball valves are designed to work in a completely open or completely closed position. valves have factory adjusted sealing gland for pressure 70 bar. Due to varied conditions use, can be required periodic regulation seal using screws seal stem (po removal lever). recommended is initial regulation against starting installation through tightening screws seal o 1/8 for 1/4 turn.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 4420 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSPT male. Operating temperature: od -20°C up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal ball valve type 4424 intended for installation industrial. It can be used for air, gases, water, chemicals, products petrochemical, etc., taking into account resistance chemical material valve and seal. meets requirements the directive PED 2014/68/UE. pressure working dependent is od temperatures use. Body material: brass nickel-plated. Material the ball: brass chrome-plated. Material lever: aluminum. sealing the ball: PTFE. sealing stem: FKM + NBR. Connection: BSPT male. Operating temperature: od -20°C up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve gentle start, serves for safe introduction air for the system pneumatic, securing element actuating against sudden increase pressure. W version with control electric, without pressure pilot, air flows with the connection inlet for output through valve needle. Po applying external signal control, electric, occurs switching valve and Flow rate air through full cross-section valve. valve not vents the system pneumatic. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve gentle start, serves for safe introduction air for the system pneumatic, securing element actuating against sudden increase pressure. valve STD: opens automatically when pressure outlet reaches about 50% value pressure inlet. valve with control pneumatic: without pressure pilot, air flows with the connection inlet for output through valve needle. Po applying external signal control, pneumatic, occurs switching valve and Flow rate air through full cross-section valve. valve not vents the system pneumatic. Size: 100. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Flow rate: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Brass needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation. valve secures pressure gauge against overload and stroke pressure during opening and allows its replacement. occurs in two versions: straight – in-line (FPE) and angled 90° (FPEA). has thread under knob, enabling assembly panel. Do valve should use adapter o index DC-FPE-FPEA, tightened for the connection with thread internal (ordered separately). Material: brass nickel-plated (body), steel carbon (needle), steel galvanized (connection - A nut), plastic (knob). sealing: NBR. Connection: 2 x 1/4" BSP female (pressure-gauge). Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight, monostable valve foot without cover protective with sockets in plane face. valve this type serves for control foot through the operator, devices in systems pneumatics. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 95 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve shut-off for compressed air V3V, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Valve shut-off Controlled manually V3V, series NEW DEAL, separates configuration working od air supply. has possibility triple lock, opening valve occurs through pressing button. used system poppet, ensures high value flow. Connection: 1/4" BSP female ÷ 1/2". Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Flow rate nominal: 1500 l/min - for the connection 1/4", 2900 l/min - for the connection 3/8" and 1/2" (at an inlet pressure of 6 bar and Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off V3V electric, series SKILLAIR®, with plates end, serves for separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 3/8". Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off angled with thread external BSP serves for closing flow the medium in installation. intended is for installation aircraft, possible is also its use with non-flammable and non-toxic gases (nitrogen, dioxide carbon, hel, argon, etc.). shut-off valve shut-off takes place through hand turning a knob causing displacement the ball, until for jej complete seal. direction flow Marked is an arrow on body valve. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material the ball: steel stainless AISI 304. sealing stem: NBR. Working pressure: from 25 bar to 40 bar, depending on the diameter internal DN. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version ended on both sides couplings push-in (line - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off through-flow with thread external BSP serves for closing flow the medium in installation. intended is for installation aircraft, possible is also its use with non-flammable and non-toxic gases (nitrogen, dioxide carbon, hel, argon, etc.). shut-off valve shut-off takes place through hand turning a knob causing displacement the ball, until for jej complete seal. direction flow Marked is an arrow on body valve. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material the ball: steel stainless AISI 304. sealing stem: NBR. Working pressure: from 25 bar to 40 bar, depending on the diameter internal DN. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off V3V manual with a lock, series SKILLAIR®, with plates end. task its is separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. W position rest (closed) can be closed on a padlock co secures valve against switching on through unauthorised persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Flow rate nominal: depending on size for 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger type VSR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), trigger discharged through coupling push-in. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger with regulation throttling type VSRR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), with the possibility regulation flow air outlet, co allows increase speed use actuator. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger type VSR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), trigger silenced at use built-in silencer. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Precision valve reducing series GS with quick venting, serves for maintaining set pressure on fixed level and fast discharge with the system pneumatic possible surplus pressure. intended for applications demanding high accuracy, e.g. for use with with actuator with reduced a coefficient friction used usually as spring pneumatic o constant characteristics. high Flow rate through valve during aeration and venting the system and high precision settings ensure two identical and opposing valves regulating, separate for the connection supply and output. assembly in installation takes place using brackets assembly or directly, at use holes assembly placed in body valve. range pressure output: 0÷2, 0÷4, 0÷8 bar. Supply pressure: up to 10 bar. medium working: filtered 10 µm compressed air, non-oiled. sensitivity valve trigger: 30 mbar. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female and 1/4". additional Connection for pressure gauge: 1/8" BSP female. Flow rate: 1200 l/min - 1/8", 1380 l/min - 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing RP type piston, is characterized resistance on heavy conditions use, Controlled remotely pressure external (pilot), intended for series NEW DEAL. Possibility of wall mounting via holes in the body. Size: 3/8", 1/2". range pressure output: dependent od the pilot control reducer. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 3/8" BSP female, 1/2". Pressure gauge connection: 1/8" BSP female. Flow rate: 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN12. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1/4" BSP female, 3/8". Diameter disc pressure gauge: Ø63. Flow rate: 2000 l/min - 1/4", 2500 l/min - 3/8" (at an inlet pressure of 20 bar Δp = 4 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing REG, series SKILLAIR®, without plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - series 100, 3500 l/min - series 200, 7000 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing with a lock REG type piston, is characterized resistance on heavy conditions use, intended for series NEW DEAL. Possibility of wall mounting via holes in the body. has stem with a hole, which is placed in upper parts a knob adjustment. when knob found in position locked exists possibility placement padlock in the bore, co prevents change settings regulator. W set with reducer found padlock and 2 keys. Size: 3/8", 1/2". Output pressure range: 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 3/8" BSP female, 1/2". Pressure gauge connection: 1/8" BSP female. Flow rate: 2500 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve reducing pneumatic cartridge RMS

          All products | Functional fittings
          0 €
          Valve reducing in version insert for direct mounting in device or for mounting block with common supply and various settings pressure air output. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing serial REG, series SYNTESI®, without end connections, serves for regulation pressure working and maintaining go on fixed level, ensuring correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat, diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, as well as greater sensitivity and speed reaction on change setting, through reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. are adapted for sampling air with connections with the front and with the back body, which can be used for connection pressure gauge, relay pneumo-electric or fittings push-in, at immediate connection connections input and output. allows to installation any quantity valves reducing one at second, powered with one source, set independently od each other. Size: SY1, SY2. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Additional connection for a pressure gauge or fittings: 1/8" BSP female for size SY1, 1/4" BSP female for size SY2. Flow rate: 500 l/min - size SY1, 1000 l/min - size SY2 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve regulating type MG4000

          All products | Guns for high-pressure washers
          0 €
          Valve regulating pressure type MG4000 with knob for use in car washes automotive. is characterized precision regulation pressure. made is with brass, a ball and seat the ball - of steel stainless. Regulator has inlet 2 x 3/8" BSP female (1 baypass) and outlet 3/8" BSP female. Regulator equipped is also in Connection pressure-gauge 1/4" BSP. Working pressure: 280 bar. Flow rate nominal: 40 l/min. Operating temperature: +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control electric (solenoid valve), with a coil control, for mounting plate. assembly plate reduces amount necessary lines, silencers and fittings, co lowers costs and increases reliability. is to ideal solution everywhere tam, where occurs the need replacement valve without the ability disconnection lines. Connection input, output and venting is found on a plate connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a tilting roller, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a tilting roller, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a roller of assist, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        Go to Top