0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -50 — -20

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 55 — 170

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose suction-delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner with UPE resistant to most aggressive chemicals, antistatic (R 6 Ω), compliant with requirements for hoses food, smooth, o low factor friction during flow, protecting deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spirals steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant to abrasion, ozone, conditions atmospheric, fire-resistant. compliant with requirements EN 12115:11 type Ω/T, completely antistatic - ensures discharge charges electrostatic also through wall hose (R 9 Ω). allows to use hose in zones hazard explosion. hose Widely used for many applications in industry chemical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, C, D2). assembly: should use fittings with spigot ("tail" for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: black polyethylene UPE. Reinforcement: cord textile, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) - ensures discharge charges electrostatic also through wall hose, co allows on use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: from 12 bar to 16 bar - depending on the diameter hose. Operating temperature: od -35°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery, very flexible, resistant to aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (e.g. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants based on glycols. Not is suitable for oils, fuels, hydrocarbons aromatic. It can be used for various paints water-soluble and based on ketones and esters. Not is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (e.g. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) textile braid spiral. Outer layer: black EPDM rubber. Operating temperature: od -40°C up to +120°C (momentarily up to +140°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose suction-delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, formaldehydes, alcohols industrial and glycols. often used in plants industrial for discharge contaminants water and water process. appropriate also for water sea. Layer inner and outer antistatic R≤10 6 Ω/m. Available version delivery (without spiral steel) - hose ORLANDO. Vacuum: 0.9 bar. Inner layer: black rubber EPM (EPR). Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber EPM (EPR). Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          The highest quality hose suction-delivery „FULL OHM” completely antistatic (Ω/T), intended for conveying substances highly flammable and very aggressive chemical. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), antistatic (R 6 Ω), mirror smooth, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic and spiral with wire steel. outer Layer type MARBLE (marbled), smooth, coated polyethylene (UPE), antistatic (R 6 Ω), meeting requirements FDA, free of odour and taste, resistant to abrasion, ozone and aging, chemicals and short-term action aggressive acids. advantage layer MARBLE is also low factor friction - hose slides and not soils surface with which is in contact, is easy for cleaning. excellent resistance chemical PFA and properties antistatic both layer internal as and outer (R 6 Ω) and in across wall hose (R 9 Ω) make, that hose is costly, ale technically ideal solution for applications demanding highest safety, we all zones hazard explosion (ATEX). used in industry chemical, petrochemical, pharmaceutical and cosmetic, a also in biotechnology. Not is intended for sterilization in autoclave. On special order Available version with additional built-in cables copper (M/T). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP CLASS VI, FDA 21 CFR 177.1550; ISO 10993-4,-10,-11, not cytotoxic (ISO 10993 Part 5); Outer layer: FDA 21 CFR 177.1520. Contains no plasticisers, phthalates or substances of animal origin. atmosphere explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. Confirmation of resistance and application conditions requires contact with Tubes International. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: black polymer PFA. Reinforcement: cord synthetic, steel spiral. Outer layer: white-black polyethylene UPE, synthetic rubber. Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -35°C up to +130°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery intended specially for conveying AdBlue ® (AUS32, DEF) - 32.5% water solution urea. layer inner hose constitutes black, smooth, antistatic (R‹10 6 Ω/m) EPDM rubber vulcanized without content sulfur. Layer inner hose not is contaminants additives aluminum, calcium, chlorine, copper, iron, potassium, magnesium, sodium, nickel and zinc, co guarantees retention the highest purity medium in accordance with the standard ISO 22241-2. is to especially important in industry automotive, in which AdBlue ® fully role regulator in order to decomposition in catalyst SCR harmful for environment oxides nitrogen. its use allows on meeting European standards emissions exhaust gases EURO 4, 5 and 6. liquid AdBlue ®, to was effective, must be very clean, co forces use specialized hoses, tanks and fittings resistant to AdBlue® and non-contaminating go. fittings and fittings for AdBlue ® should be made of steel stainless or appropriate plastic. except for automotive, hose used is also in industry chemical, on example at production fertilisers nitric. Inner layer: black EPDM rubber. Reinforcement: a synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar or 20 bar. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very Light, flexible hose suction-delivery, intended for conveying substances chemical. made with thermoplastic vulcanizate TPV – material connecting advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows on use go for many substances, between other acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant to conditions atmospheric, aging and abrasion (abrasion resistance compliant with ISO 4649:150 mm 3 ). low weight and small radius bending hose ensure ease operation, co can be advantage at handling with tankers and container. On special order Available version VACUPRESS SUPER CHEMI (diameter for 63 mm) with layer inner lined polyethylene (LLDPE) co increases resistance chemical hose and allows its use between other for concentrated acids hydrochloric and sulfuric, for acid nitric and for aggressive herbicides and insecticides. Inner layer: thermoplastic rubber TPV. Reinforcement: a polyester braid, steel spiral galvanized. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +20°C : od 7 up to 15 bar - depending on the diameter hose. Operating temperature: od -25°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic hydrocarbons aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spiral steel, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for paints, varnishes NR SPRAY

          All products | Chemical hoses
          0 €
          High quality rubber hose delivery manufactured in USA o layer internal made with resistant chemical polyamide (nylon). very smooth surface inner reduces losses flow and ensures ease cleaning. Reinforcement synthetic a braid textile ensures high resistance pressure and small deformation under pressure. smooth Layer outer with rubber synthetic, resistant to contact with chemicals and oil (RMA Class B – resistance medium). Dla hoses o diameter internal 1/4" and 3/8" Layer outer antistatic R 6 Ω. hose intended for applications industrial, in particular for solvents organic and substances petrochemical. good resistance polyamide on many solvents allows on use hose in industry paint, for conveying paints, varnishes, adhesives and resins. should always take into account resistance chemical and any problem electricity static. W particular antistatic hoses o diameters 1/4" and 3/8" are widely used as hoses for paints supply pressure Gun spray in workshops automotive, construction and industry. checking resistance chemical: table resistance chemical PA (selection initial), confirmation resistance and conditions use through Tubes International. assembly: should use fittings with spigot ("tail" for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with polyamide. possible is use typical ends hydraulic. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly depending on pressure working hose clamps clamping, ferrules clamping or for greater diameters clamps shell. typical factory hoses for guns spray have often fittings bolted repeated use. Inner layer: polyamide (PA), without silicone. Reinforcement: textile braid single for 1/4" and 3/8", double od 1/2". Outer layer: black synthetic rubber. Working pressure: 52 bar. Operating temperature: od -20°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, aldehydes, alcohols industrial and glycols. basic, classic rubber hose chemical. often used in plants industrial and treatment plants for discharge contaminants water and water process. appropriate also for water sea. Layer inner with antistatic (R ≤ 10 6 Ω/m) rubber EPR (other marking: EPM). Reinforcement with high-strength cord. Layer outer with rubber antistatic (R ≤ 10 6 Ω/m) EPR (EPM) resistant to chemicals, abrasion, ozone and conditions atmospheric. Layer inner and outer antistatic. Inner layer: black rubber EPM (EPR). Reinforcement: cord synthetic. Outer layer: black rubber EPM (EPR). Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very Light, flexible hose suction-delivery, intended for conveying substances chemical. made with thermoplastic vulcanizate TPV – material connecting advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows on use go for many substances, between other acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant to conditions atmospheric, aging and ozone. low weight and small radius bending hose ensure ease operation, co can be advantage at handling with tankers and container. Note: all sizes hose have on branding marking approximate pressure working (WP 10 bar).Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: thermoplastic rubber TPV. Reinforcement: a polyester braid, steel spiral. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +23°C : od 12 up to 14 bar - depending on the diameter hose. Operating temperature: od -30°C up to +80°C (working pressure depends on temperature).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          The highest quality hose suction-delivery, intended for conveying aggressive substances chemical, solvents and concentrated chemicals, characterized by high strength thermal and mechanical and highest cleanliness layer internal. Layer inner with white polymer perfluoroalkoxy MFA (polymer fluorine o properties close for PTFE), mirror smooth (prevents deposition medium on walls and is easy in maintaining purity), free of odour and taste, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic, spiral with wire steel. outer Layer with rubber EPDM, antistatic (R 6 Ω ), resistant to abrasion, ozone and conditions atmospheric. hose is characterized excellent resistance chemical and cleanliness MFA, impermeability, resistance to temperature, oxidation and stresses mechanical. Widely used in industry chemical Due to total resistance to action greater substances chemical. appropriate for conveying concentrated acids and alkalis (acid sulfuric, hydrochloric, phosphoric, nitric, lye sodium, potassium etc.). resistant to rigorous conditions cleaning method Cleaning-in-Place (CIP). On special order version M according to EN 12115 with built-in two cables copper ensuring discharge charges electric. standards and requirements: hoses chemical: EN 12115:2011 (type Ω). industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP CLASS VI, FDA 21 CFR 177.1550 (e-and); ISO 10993. Contains no plasticisers, phthalates or substances of animal origin. assembly: should use fittings with spigot ("tail" for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with MFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: white polymer MFA. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -50°C up to +170°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Low-pressure hose suction-delivery with transparent layer inner with resistant chemical PFA and thick layer external with transparent silicone. intended for various applications in industry pharmaceutical, cosmetic, food and chemical, where besides the highest purity, asepsis and resistance chemical required is observation flow medium. Layer inner with polymer perfluoroalkoxy PFA (polymer fluorine o properties close for PTFE), transparent, mirror smooth, free of odour and taste, inert chemical, meeting high requirements hygienic (FDA, USP, European EU). Reinforcement spiral of steel stainless ensures good resistance to vacuum. thick Layer outer with silicone cross-linked compounds platinum o smooth surface features properties not adhesion (hose not „adhesives ”) and small a coefficient friction. can be easily purified at use weak detergent. The design hose combines advantages PFA with flexibility silicone and its resistance on temperature. hose has small minimal radius bends, is pliable and flexible in low and elevated temperatures, resistant to cyclic bending in accordance with ASTM D 2176 and on loads dynamic. standards and requirements hygienic: Inner layer: USP CLASS VI, 3-A Sanitary Standards 18-03 Class I, 10/2011/EU, FDA, ISO 10993-4, -10, -11, non-cytotoxic (ISO 10993 Part 5), ICH Q3D; Outer layer: USP CLASS VI, 3-A Sanitary Standards 18-03 Class I, D.M. 21/03/73, FDA, BfR, European Pharmacopoeia 3.1.9, ISO 10993-4, -10, -11, non-cytotoxic (ISO 10993 Part 5). hose compliant with 1935/2004/EC, 2023/2006/EC (GMP), made in Cleanroom ISO 14644-1 Class 8, not contains phthalates, adipates, nitrosamines, substances origin animal, substances subject EC 1907/2006 (REACH). Confirmation of resistance and application conditions requires contact with Tubes International. For confirmation of resistance and conditions of use, please contact Tubes International. assembly: should use fittings with spigot („tail” for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with PFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly ferrules clamping or hose clamps (clamps). Inner layer: transparent polymer PFA. Reinforcement: spiral of steel stainless AISI 302. Outer layer: transparent silicone. Working pressure: from 1 bar to 3 bar, depending on the diameter hose. Operating temperature: od -30°C up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high a concentration hydrocarbons aromatic, hot oil and solvents. Due to high general resistance chemical rubber FPM It can be used for aggressive chemicals, in many cases also in elevated temperatures. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic. Layer outer with rubber chloroprene CR resistant to conditions atmospheric, ozone, abrasion and oils. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50 º C. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 10 bar. Operating temperature: od -25°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose delivery for conveying anhydrous ammonia in the molds liquid and gas. Layer inner with thick rubber antistatic (R≤10 6 Ω/m). Reinforcement with high-strength cord ensures high Safety factor 5:1. Layer outer with rubber antistatic (R≤10 6 Ω/m) resistant to chemicals, abrasion, ozone and conditions atmospheric, micro-perforated. hose compliant with requirements standards EN ISO 5771:2008 for hoses rubber for conveying anhydrous ammonia. hose intended in particular for ammonia in processes production fertilisers nitric, agents cleaning and for syntheses many compounds chemical. can be used in other fields industry, using anhydrous ammonia, such as refrigeration industrial (agent R717 – ammonia, used is in large installations refrigerant; hoses flexible serve primarily for filling installation), metallurgy and many other. hose can be also used for ammonia dissolved in water - water ammonia, used widely in industry m.in. in treatment plants sewage (regulator pH), for regeneration resins ion-exchange, in industry gum and plastics and for treatment water boiler. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber, micro-perforated. Working pressure: 25 bar. Operating temperature: od -40°C up to +55°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose suction - delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high a concentration hydrocarbons aromatic, hot oil and solvents. Due to high general resistance chemical rubber FKM It can be used for aggressive chemicals, in many cases also in elevated temperatures. used for handling chemicals with tankers road and railway. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic and spiral steel. Layer outer with rubber chloroprene CR, antistatic, resistant to conditions atmospheric, ozone, abrasion and oils. built-in two copper cable for discharge charges electrostatic. compliant with EN 12115:11 (type M). Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Vacuum: 0.9 bar. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: cord synthetic, steel spiral. Outer layer: black rubber CR. Working pressure: 16 bar. Operating temperature: od -25°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          The highest quality hose suction-delivery intended for conveying very wide range aggressive substances chemical. wide use hose, primarily in industry chemical, conditioned is excellent resistance polymer fluorine FEP on aggressive solvents and concentrated lyes and acids such as: acid hydrochloric, sulfuric, phosphoric, nitric and lye sodium and potassium. hose It can be used also in industry food and pharmaceutical. readily used is in zones pure. Layer inner with white copolymer tetrafluoroethylene / fluoropropylene FEP (thermoplastic polymer fluorine o properties close for PTFE), mirror smooth (prevents deposition medium on walls and is easy in maintaining purity), free of odour and taste, meeting high requirements hygienic (FDA, USP CLASS VI). layer intermediate with white rubber synthetic, contain Reinforcement with cord synthetic, spiral with wire steel and two copper cable for discharge charges electrostatic. outer Layer with orange rubber EPDM, resistant to abrasion, ozone and conditions atmospheric. hose is characterized excellent resistance chemical and cleanliness FEP and exceptional resistance to temperature. specially designed for cleaning method Cleaning-in-Place (CIP), in this for sterilization steam 150ºC. standards and requirements: hoses chemical: EN 12115:2011(type M). industry food, contact with food (Layer inner): USP CLASS VI, FDA 21 CFR 177.1550. Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: white, smooth FEP. Reinforcement: cord synthetic, steel spiral. Outer layer: orange smooth EPDM rubber. Working pressure: 16 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +150°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic hydrocarbons aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:2011 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements: hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP ), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -40°C up to +100°C.
        • Hose for paints and solvents with antistatic wire PAINT SPRAY PA-M
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-quality German-made delivery hose with an inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures easy cleaning. Outer layer of NBR rubber, resistant to ozone, weather conditions and UV radiation. The hose is designed for adhesives, varnish, oil, paints, polar and aromatic solvents. The hose has two copper anti-static wires built into the braid, ensuring (when properly connected to metal fittings) conductivity of the hose assembly (R
        • Hose for paints and varnishes NR SPRAY C
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Rubber delivery hose with inner layer made of chemically resistant polyamide (nylon). The very smooth inner surface reduces flow losses and ensures easy cleaning. Smooth outer layer made of synthetic rubber, resistant to contact with chemicals and oil (ARPM Class B). A hose for many industrial applications, such as paint transfer and agricultural spraying. The good resistance of polyamide allows the hose to be used for paints, varnishes, solvents, adhesives and resins, oils, petrochemical substances and other chemicals. Anti-electrostatic properties of the hose are not declared. Inner layer: polyamide (PA), silicone-free. Reinforcement: textile braid: single for 1/4" and 3/8", double from 1/2" up. Outer layer: black synthetic rubber. Operating temperature: from -20°C to +90°C. Checking chemical resistance: PA chemical resistance table (preliminary selection), confirmation of resistance and conditions of use by Tubes International (in particular for temperatures above 50°C). Assembly: fittings with a nipple (hose tail) of a diameter matched to the hose, without sharp or high barbs that could cut or damage the inner polyamide layer when clamped, should be used. Assembly with bands, clamps or crimp sleeves.
        Go to Top