0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -150 — -10

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 60 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. Do extraction and conveying hot air, aggressive chemical vapours, exhaust gases and gases in systems ventilation and heating. has resistance to UV, ozone and conditions atmospheric. used in equipment vehicles, engines and in industry chemical. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for CSM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: externally black fabric polyester coated CSM - Hypalon. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Smooth inside hose ducting P1NPU, P1NPUAS, P1NPUEL

          All products | Ducting and ventilation hoses
          0 €
          Light, flexible and smooth inside hose with white spiral, intended for discharge dusts, chips, fibres and light bulk materials in industry paper, textile, wood. its flexibility and flexible, retains also in low temperatures. dense steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters available on order. versions: P1 N PU – standard o high resistance to abrasion; P1 N PU AS – antistatic (R ≤ 10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, resistant to microbes and hydrolysis; P1 N PU EL – conductive electrically (R ≤ 10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion (po carrying out analysis risk). Hose material: transparent polyester-polyurethane (P1 N PU), transparent polyether-polyurethane (P1 N PU AS), black polyether-polyurethane (P1 N PU EL). Reinforcement: spiral with wire steel coated PVC. Wall thickness measured between the spiral: 0.5 mm and 0.6 mm od diameters 100 mm. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, in color grey, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Available also in other colors and of spiral of steel stainless (od diameter 80 mm). version AS – antistatic (R ≤10 9 Ω) - made in color black. Assembly of the hose on connectors with bridge clamps (lewo-handed). checking resistance chemical: table resistance chemical PVC (selection initial), confirmation resistance and conditions use through Tubes International. Standard length: from 2 to 10 m - contact Tubes International. Hose material: grey fabric polyester impregnated PVC. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, pliable and flexible hose intended for extraction hot vapours, fumes, gases, dusts, discharge air cooling and air blowing. flame-retardant, resistant to temperature, radiation UV, ozone and aging. used we all fields industry for applications high-temperature, m.in. for extraction with furnaces in industry metallurgical, foundry, industry glass and ceramic. is characterized high compressibility, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric glass impregnated silicone (silver-grey), o wall thickness 0.4 mm. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -60°C up to +300°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Three-layer hose suction o specific the structure intended for discharge very hot (up to 1100°C) gases, vapours, fumes and air. outer Layer impregnated fabric glass with threads of steel stainless ensures strength mechanical, central thick fabric high-temperature fully role insulating, inner very fine mesh of steel stainless separates Flow rate hot gases. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o very high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. hose o strong the structure and resistance to impacts thanks to outer spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). hoses o small diameter internal < 100 mm are characterized tzw. two-hose design (Layer inner with mesh constitutes separate hose of spiral). Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: od 2 for 10 m - depending on the diameter. Hose material: 3 layer: externally impregnated fabric glass with fibres of steel stainless (grey), central Layer - high-temperature fabric insulating, inside fine mesh - steel stainless. Reinforcement: outer spiral with wire and sheet of steel stainless. Operating temperature: od -50°C up to +1100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very Light, flexible and very pliable hose intended for discharge aggressive chemical vapours and gases we all fields industry. excellent resistance chemical, high resistance temperature. hose is characterized high compressibility, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. available other diameter in the scope 50 ÷ 508 mm and version of spiral of steel stainless. Assembly of the hose on connectors with bridge clamps (lewo-handed). version PTFE EL CL - hose conductive electrically o resistance R ≤10 6 Ω, compliant with the directive ATEX 94/9/EC and the standard TRBS 2153, made with black PTFE. Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: 3 or 6 m. Hose material: light-brown fabric glass coated Teflon (PTFE), o wall thickness 0.12 mm - version standard PTFE CL, fabric glass coated black conductive Teflon (PTFE), o wall thickness 0.15 mm - version antistatic PTFE EL CL. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -150°C up to +250°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). thanks to layer outer with fabric glass coated silicone and layer internal with PTFE hose is resistant to temperature for 250ºC. hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone, aging, conditions atmospheric, flame-retardant. used in industry chemical, metallurgy metals and foundry, industry ceramic and glass. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard SILTEF, black conductive foil PTFE PTFE - version antistatic SITEF EL. Material hose Outer layer: fabric glass coated silicone, silver - grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +250°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, pliable and flexible hose intended for extraction hot fumes, gases, dusts, discharge exhaust gases, air cooling and air blowing. used we all fields industry for applications high-temperature, especially in construction machine, vehicles, equipment engines, use aviation and military. resistant to temperature, flame-retardant and very strength mechanical. is characterized excellent compressibility, very strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Other diameters are available on special order in the scope 50 ÷ 508 mm. Assembly of the hose on connectors with bridge clamps (lewo-handed). length standard: 3 m (on special order also sections 6 and 10 m). Hose material: fabric with fibre aramid internal impregnated silver-grey silicone, o wall thickness 0.4 mm, externally green-grey. Reinforcement: type CLIP - outer spiral with wire and sheet steel galvanized left-handed. Operating temperature: od -60°C up to +260°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Symmetrical tee 90° KTSB 90, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Symmetrical tee 90° KTSB 90 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fairly Light, flexible and pliable, resistant to temperature two-layer hose suction intended for discharge vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used at furnaces and engines for extraction gases o high temperature, in industry metallurgical, ceramic, shipbuilding, aviation, automotive and equipment military. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer impregnated fabric glass with fibres of steel stainless, grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +650°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Straight connector KN, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Straight connector KN intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical two-layer hose intended for discharge most aggressive chemical vapours, gases, dusts and fibres (non-abrasive). very good resistance chemical on aggressive chemicals thanks to internal layer film PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard PETEF, black conductive foil PTFE PTFE - version antistatic PETEF EL. Material hose Outer layer: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Symmetrical reducing straight connector KRS intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 45° KSBB 45, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Elbow 45° (R = 1.5 x d) KSBB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 90° KSBB 90, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Elbow 90° (R = 1.5 x d) KSBB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose ducting SUPERFLEX PU R

          All products | Ducting and ventilation hoses
          0 €
          Light, flexible hose intended for discharge dusts, sawdust, chips, light bulk materials o properties abrasive. used in industry wood, construction, food. resistant to ozone. Wall thickness measured between the spiral. available other diameter in the scope 30 ÷ 400 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated spiral with wire steel. Operating temperature: od -40°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Symmetrical “Y” tee KTSBY, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Symmetrical "Y" tee KTSBY intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose ducting for vapours chemical and gases GRIPFLEX PE

          All products | Ducting and ventilation hoses
          0 €
          Light, very flexible and pliable, resistant chemical hose intended for discharge aggressive chemical vapours, gases, dusts and fibres. used mainly in industry chemical and m.in. at removal asbestos. very good resistance chemical on solvents and other aggressive vapours. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. is characterized high compressibility - for 1:8, strong design, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyethylene coated polyethylene (PE). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose ducting SUPERFLEX PU PLUS H

          All products | Ducting and ventilation hoses
          0 €
          Hose polyurethane, reinforced spiral with wire steel, intended for discharge and conveying bulk materials, dusts and sawdust. resistant to ozone. Hose material: transparent polyurethane. Reinforcement: spiral with galvanized wire steel. Operating temperature: od -40°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Asymmetrical reducing straight connector KRA intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fittings made with soft PVC intended for hose SUPERELASTIC. available also polyethylene connector T and Y mounted inside hose. color black. temperature use od 0ºC for + 70ºC (momentarily for + 80ºC).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting made with soft plastic, Intended for screwing on on hose EVA.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A clamp for connecting hoses SPIRAFLEX ending rings. made with profile, PVC, of steel galvanized a cable tensioning. lock with a lever of galvanized steel. width about 60 mm. ensures fast connection and disconnection sections hoses SPIRAFLEX, easy design runs blowing and ventilation in conditions field. on request Available in many other sizes in the scope DN150 – DN1200.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee 45° KTSB 45, steel galvanized

          All products | Ducting and ventilation hoses
          0 €
          Tee 45° KTSB 45 intended for quick and efficient assembly of ducting hoses using BC worm-drive bridge clamps. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Very thick, ecological hose ducting ECO 2.0, ECO 2.5

          All products | Ducting and ventilation hoses
          0 €
          Very strong, o thick wall and thick spiral, flexible hose intended vacuum extraction and conveying materials abrasive e.g. sand, gravel, grain. Dla all types industry, in particular used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and very dense spiral reinforcing ensures high resistance to vacuum. smooth inside, not compressible, not very pliable, but flexible, also in low temperatures. O excellent resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. hoses ECO 2.0 and ECO 2.5 independently od its wall thickness, differ between each other design, a co za this goes also parameters. ECO 2.0 thanks to dense spiral has greater resistance to vacuum, ale is less pliable, whereas ECO 2.5 o greater stroke spiral is more pliable and flexible, especially in greater diameters. hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 2.0 mm (ECO 2.0), 2.5 mm (ECO 2.5). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical and temperature-wise two-layer hose intended for discharge and conveying most aggressive chemical vapours, gases, dusts and fibres (non-abrasive), air blowing hot air. very good resistance chemical on aggressive chemicals thanks to internal layer PTFE. W version standard inner Layer white natural PTFE meets requirements industry food (FDA). W version antistatic EL black inner Layer PTFE is electrically conductive (R ≤10 6 Ω). hose is characterized high compressibility - for 1:6, strong design resistant on vibration, stretching and tearing, resistance on impacts thanks to outer spiral. resistant to radiation UV, ozone and aging. used in industry chemical, petrochemical and food. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for PTFE (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Material hose Inner layer: white foil PTFE PTFE - version standard HYTEF, black conductive foil PTFE PTFE - version antistatic HYTEF EL. Material hose Outer layer: black fabric polyethylene coated rubber CSM. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical hose intended for extraction and conveying aggressive chemical vapours solvents, paints, hydrocarbons, chemicals etc. thanks to conductive rubber FKM has properties anti-electrostatic (resistance surface R 6 Ω. very good resistance to oil, substances aromatic, most acids and chemicals. excellent resistance to elevated temperature. resistant to radiation UV and ozone. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. used in industry paint, chemical and paper. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for FKM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: fabric polyester coated FKM, antistatic, externally black. Reinforcement: outer spiral with sheet and wire steel. Operating temperature: od -25°C up to +210°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light and o excellent flexibility hose intended for discharge vapours oils, dusts, light bulk materials. resistant to microorganisms and hydrolysis. meeting requirements FDA and directives European. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose polyurethane for sweepers road P7 M STREET

          All products | Ducting and ventilation hoses
          0 €
          Strong, thick, flexible hose intended for extraction and conveying materials abrasive: sand, gravel, rubbish, leaves and other contaminants. intended for use in cleaning streets, squares and ways. used in sweepers and other equipment services municipal and road. special The design hose P7 M STREET makes, that despite high wall thickness wall (1.4 mm) hose has smaller radius bends (1.2 x D) than standard hoses o tej wall thickness. folds hose between spiral at bending fold over on outside, co reduces resistance flow and wear. pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Wall thickness measured between the spiral. assembly on spigots hose clamps bridge (right-handed). Other diameters may be available on special order. Hose material: transparent and black polyether – polyurethane. Wall thickness: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
        Go to Top