- Home
- Industrial hoses
- Ducting and ventilation hoses
Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose intended for extraction and conveying dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. thanks to made with polyether–polyurethane has good resistance to abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope conveying bulk and liquid materials food, in this greasy or oily. Not recommended for milk and its dairy products. Reinforcement spiral with hard PVC ensures good resistance to crushing. version antistatic hose has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective earthing cable ensures sufficient for many applications level discharge charges electrostatic. used in particular in industry agricultural–food, plastics, materials construction etc. hose WIND STAR PU complies with the European requirements 10/2011/EU (simulants A, B, C, D2 and E), and American FDA 21 CFR 177.2600 „d”, „e”, „f” (dry, liquid-water, fatty). information additional regarding applications food and pharmaceutical – see section „hoses for products food”. Hose material: transparent polyether- polyurethane. Reinforcement: rigid-PVC spiral. Operating temperature: od -40°C up to +80°C (working pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose intended for discharge air, vapours oil and fuels, dust, dusts, very fine sawdust, chips and light bulk materials. Dla all types industry, in particular often used for dedusting and discharge vapours and fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, in version AS with polyether resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P2 PU – version with polyester - polyurethane, o very sound resistance to abrasion; P2 PU AS – version antistatic (R ≤10 8 Ω, compliant with TRBS 2153, for extraction also with TRGS 727), made with polyether - polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P2 PU), polyether – polyurethane (P2 PU AS). Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness hose flexible of spiral reinforcing, intended for extraction and conveying bulk materials abrasive, granulates, chips, offcuts etc. used in various branches industry, in particular often used for discharge particles solid in industry plastics, wood, materials construction and metal. pliable and flexible, also in low temperatures. smooth inside, little compressible. dense and thick steel spiral coated white PVC ensures high parameters pressure, is resistant to corrosion and has good adhesion for material hose. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. versions: P3 PU – version standard, with polyester – polyurethane, very resistant to abrasion; P3 PU AS – version antistatic (R ≤10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis; P3 PU EL – version conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be used in zones hazard explosion po carrying out analysis risk, made with black polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 PU), transparent polyether-polyurethane (P3 PU AS), black polyether-polyurethane (P3 PU EL). Wall thickness measured between the spiral: 0.8 ÷ 1.5 mm (depending on the diameter hose). Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. pliable and flexible, also in low temperatures. less compressible than hose SMARTFLEX® 0.4, ale smoother inside. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.6 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable hose intended for discharge aggressive chemical vapours and for use in elevated temperature. good resistance to temperature, good resistance to vapours acids and solvents. resistant also on radiation UV, ozone, hydrolysis and corrosion biological. strength on bending. used for mechanical extraction vapours, air conditioning and ventilation in vehicles mechanical (buses, cars and trailers camping, boats recreational etc.), on inlets air for engines and compressors, in dryers granulates and plastics, in blow-moulding machines film etc. Other diameters are available on special order in the scope 15 ÷ 800 mm. version flame-retardant P2SP SE is compliant with requirements standards DIN 4102 B1 for materials construction. Hose material: fabric polyester impregnated black TPE (thermoplastic elastomer). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose medium wall thickness, intended for discharge dust, sawdust, chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. dense spiral reinforcing ensures greater resistance to vacuum in ratio for hoses ECO 0.4 and ECO 0.6. pliable, less compressible, smooth inside and flexible - also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.7 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose SILICONE 1, o two layers fabric coated silicone and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for extraction gases in industry metallurgical, foundry, industry glass and ceramic, for hot air in dryers industrial, in printing houses and paper mills, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. not recommended for continuous dynamic bending. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass coated red silicone. Reinforcement: spiral with wire steel, double outer cable with fibre glass. Operating temperature: od -70°C up to +250°C (momentarily up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness, flexible hose intended for discharge dusts, sawdust, chips, offcuts, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 2. Antistatic and flame-retardant, it ensures a high level of work safety. less pliable and compressible than SMARTFLEX® 0.4 and 0.6, za to smooth inside, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible, thick hose intended for discharge sawdust, chips, offcuts, bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 3. Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense spiral reinforcing ensure high parameters pressure. very smooth inside, little compressible. flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.4 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose intended for extraction and conveying under slight overpressure dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. hose made is with polyether - polyurethane and has good resistance to abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope conveying bulk, dry materials food. complies with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 1895/2005/EC, 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 „d”. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Reinforcement spiral with hard PVC ensures good resistance to crushing. Used in various industrial applications, in particular in industry agricultural – food, plastics, materials construction etc. versions: standard and antistatic - has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective earthing cable ensures sufficient for many applications level discharge charges electrostatic. the given Wall thickness hose, measured is between spiral. Hose material: transparent polyether-polyurethane. Reinforcement: rigid-PVC spiral. Operating temperature: od -25°C up to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium wall thickness, strong and flexible hose intended for discharge sawdust, chips, offcuts, light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. Antistatic and flame-retardant, it ensures a high level of work safety. less pliable and compressible than SMARTFLEX® 0.4, 0.6 and 0.7, za to smooth inside, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.0 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, pliable and almost smooth inside hose with soft polyvinyl chloride (PVC) reinforced spiral with hard PVC (right-handed). intended for discharge dusts, smoke, fibres, extraction contaminants air etc. used also for discharge condensate in installations air conditioning and as A guard lines and cables. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. The hose wall thickness is measured between the spiral. Hose material: grey, soft PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -15°C up to +60°C (podworking pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, extremely pliable and flexible hose intended for discharge dust, dust, contaminants air, fumes, vapours etc. thanks to unique the structure with longitudinal and transverse reinforcement fibres synthetic and of spiral steel is characterized very small radius bends, resistance on kinking and exceptional resistance on stretching. durable and reliable, commonly used in systems vacuum cleaners industrial and domestic, in works construction for purification and drying and as hose cover. Not contains cadmium in accordance with BGR 132. discharge charges electric through earthing spiral steel. left-handed spiral reinforcing allows screwing on appropriate ends for vacuum cleaners with thread left (ends PVC for hose SUPERELASTIC or other appropriate). possible is also Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Hose material: two layer soft PVC reinforced fiber. Reinforcement: steel spiral coated PVC. Operating temperature: od 0°C up to +85°C (working pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 1. Antistatic and flame-retardant, it ensures a high level of work safety. very pliable and compressible, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and smooth with small grooves inside hose with soft polyvinyl chloride (PVC), reinforced spiral with hard PVC (right-handed). intended for extraction contaminants air, smoke, discharge dusts, chips, fibres in industry textile etc. widely used in various use industrial. self-extinguishing and flame-retardant, in accordance with American class flammability UL 94 V-2. Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Wall thickness measured between the spiral. Hose material: soft grey PVC. Reinforcement: rigid-PVC spiral. Operating temperature: od -10°C up to +60°C (podworking pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose medium wall thickness, intended for discharge chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. wall medium wall thickness and dense spiral reinforcing ensures higher parameters pressure in ratio for hoses ECO 0.4, 0.6 and 0.7. very smooth inside, little compressible and flexible - also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 1.0 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge air, dust, dusts, sawdust, fine chips, light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. pliable and flexible, also in low temperatures. compressible, smoother inside in comparison hose ECO 0.4. O sound resistance to abrasion, resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.6 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying powders, grains, light granulates and other bulk materials in industry food and pharmaceutical. used m.in. for milk in powder, grain, rice, coffee, tea, flour (version PAS). fairly pliable, little compressible, smooth inside, flexible also in low temperatures. resistant on abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. versions: P7 M PU FOOD – standard, spiral with wire steel; P7 M PU PAS FOOD – spiral of steel stainless, Material hose permanently antistatic (R ≤10 8 Ω, in accordance with TRGS 727). hoses P7 M PU FOOD and P7 M PU PAS FOOD are compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. are suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 1.4 mm. Reinforcement: spiral with wire steel (P7 M PU FOOD), spiral with wire of steel stainless AISI 301 (P7 M PU PAS FOOD). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, flexible hose o thick wall, intended for discharge chips, bulk materials, granulate etc. Dla all types industry, in particular often used for discharge chips and other particles solid in industry wood, furniture, ceramic, plastics. thick wall and dense spiral reinforcing ensure high parameters pressure. very smooth inside, little compressible and flexible - also in low temperatures. O excellent resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (UL94 V-2), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 1.4 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, gravelling roofs, cleaning industrial, abrasive for sandblasting, silos, tankers for bulk materials etc. compliant with the standard DIN 26057 Type 4 (SMARTFLEX® 2.0). Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense, thick spiral reinforcing ensures high resistance to vacuum. smooth inside, non-compressible, not very pliable, but flexible, also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 2.0 mm (SMARTFLEX® 2.0), 2.5 mm (SMARTFLEX® 2.5). Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong, thick, flexible hose intended for extraction and conveying abrasive bulk materials: granulates, grain, sand, gravel. thick wall and very dense spiral reinforcing ensures high resistance to pressure and vacuum. very smooth inside, non-compressible, not very pliable (r=4xD), retains its flexibility also in low temperatures. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed) or assembly special on ends industrial e.g. flange. Other diameters may be available on special order. versions: P3 S PU – version standard, with polyester – polyurethane, very resistant to abrasion and P3 S PU AE - version with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis; with approval for contact with substances food, compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International); P3 S PU AS – version antistatic (R ≤10 8 Ω), compliant with TRBS 2153 and for extraction also with TRGS 727, with polyether – polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P3 S PU), transparent polyether-polyurethane (P3 S PU AE and P3 S PU AS). Wall thickness measured between the spiral: 2 mm. Reinforcement: dense spiral with wire steel. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable, resistant to temperature two-layer hose suction - delivery intended for discharge and conveying vapours, fumes and air o high temperature. flame-retardant, resistant chemical, o fairly sound resistance to hot sparks. used in the structure furnaces (steelworks and foundries metals and glass, industry ceramic and chemical), vehicles (installations discharge exhaust gases, stations testing engines etc.), use aviation and military. It is characterised by high compressibility - up to 1:6, a strong construction, and impact resistance thanks to the external spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: 2 layer fabric glass, outer Layer coated silicone (grey). Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +450°C (momentarily up to +500°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for discharge hot exhaust gases engines petrol and diesel. used as hose workshop unrolled on floor adapted for drum systems winding, hose for channels suction or on stations for testing engines. resistant to creasing thanks to reinforcement white, thick, round spiral nylon (PA), cover with outside black TPE. resistant chemical, in particular on vapours gasoline and oil, a also ozone, hydrolysis, microbes and radiation UV. Not contains halogens and softeners. hose P-G-EX 1 should be used together with with vacuum system discharge exhaust gases, using appropriate connector between a hose a outlet exhaust gases with engine. Other diameters are available on special order in the scope 40 ÷ 250 mm. Assembly of the hose on connectors with bridge clamps (prawo-handed). length standard: 2.5 m, 5 m, 7.5 m, 10 m, 15 m and 20 m. Thickness measured between the spiral: 0.4 mm. Hose material: fabric polyester impregnated black coating TPE (thermoplastic elastomer). Reinforcement: spiral nylon in cover TPE protective against abrasion. Operating temperature: od -40°C up to +150°C (momentarily +170°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible, having resistance to creasing and twisting hose intended for discharge dusts, contaminants air, fumes welding. commonly used in systems vacuum cleaners industrial. shaped in profile hose outer spiral reinforcing, left-handed, allows screwing on appropriate ends for vacuum cleaners with thread left (ends plastic o index ME-EVA...). Assembly of the hose with clamps on suitable ends, pipe spigots etc. is also possible. Hose material: grey ethylene-vinyl acetate (EVA). Reinforcement: spiral reinforcing shaped in profile hose. Operating temperature: od -30°C up to +60°C - for hose EVA and od -25°C up to +60°C - for hose EVA IVH (podworking pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose intended for discharge air, vapours, dust, dusts, very fine fibres, powders, grains, light bulk materials. intended for use in industry food and pharmaceutical. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P2 PU FOOD – spiral with wire steel (copper-plated); P2PU PAS FOOD – spiral with wire of steel stainless, Material hose permanently antistatic (R ≤ 10 8 Ω, in accordance with TRGS 727). hoses P2 PU FOOD and P2 PU PAS FOOD are compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. are suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral with wire steel (P2 PU FOOD), spiral with wire of steel stainless AISI 301 (P2 PU PAS FOOD). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible and pliable, resistant to temperature hose suction intended for discharge gases, vapours, fumes and air o high temperature. Flame-retardant, to some extent resistant to hot sparks. used mainly in industry metallurgical, foundry, ceramic, glass, at furnaces, engines and as A guard thermal. It is characterised by high compressibility - up to 1:6, a strong construction thanks to glass fabric reinforced with stainless steel threads, and impact resistance thanks to the external spiral. Used only as a suction hose working under vacuum, due to the possibility of gases penetrating outwards under overpressure (degassing). Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Standard length: from 2 to 10 m - contact Tubes International. Hose material: impregnated fabric glass with fibres of steel stainless, externally grey. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -50°C up to +400°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. resistant chemical, on radiation UV and aging. used m.in. for extraction gases in industry metallurgical, foundry, industry glass and ceramic, for hot air in dryers industrial, in printing houses and paper mills, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. not recommended for continuous dynamic bending. Assembly with clamps. Other diameters are available on special order. Hose material: fabric glass impregnated red silicone. Reinforcement: inner spiral with wire steel, outer cable with fibre glass. Operating temperature: od -70°C up to +250°C (momentarily up to +300°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong, thick, flexible hose intended for extraction and conveying granulates and other bulk materials. intended for use in many types industry. used m.in. granulate plastics, materials insulating, waste, sand and other materials construction. fairly pliable, little compressible, smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). can be available other diameter. besides version standard P7 M PU AE hose Available is in version P7 M PU EL conductive electrically (R ≤10 4 Ω), compliant with ATEX 2014/34/EU, TRBS 2153 and for extraction also with TRGS 727, can be ona used in zones hazard explosion po carrying out analysis risk. Hose material: polyether-polyurethane. Wall thickness measured between the spiral: 1.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery strong and thick, flexible hose intended for extraction and conveying abrasive bulk materials, granulates, sand, gravel, pebbles, substrate agricultural. used for loading and emptying silos, vehicles and excavators suction, handling with tankers etc. thick wall and fairly dense spiral reinforcing ensures high resistance to pressure and vacuum. smooth inside, non-compressible, fairly pliable (r=2.5xD), flexible also in low temperatures. hose o sound resistance to abrasion, resistant also on oils and gasoline. Assembly on connectors with bridge clamps (prawo-handed) or assembly special on ends industrial e.g. flange. Other diameters may be available on special order. versions: P3 SV PU – with polyester – polyurethane, very resistant to abrasion; P3 SV PU AE - version with polyether – polyurethane, resistant to abrasion, resistant to microbes and hydrolysis, compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. is suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyester-polyurethane (P3 SV PU), polyether – polyurethane (P3 SV PU AE). Wall thickness measured between the spiral: 2.5 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, exceptionally flexible and compressible hose intended for air conditioning, discharge and air blowing air, extraction fumes welding. Widely used for arms ducting, ventilation, heating tents, drying the structure construction. self-extinguishing and non-flammable (non-spreading flame) in accordance with UL94 V-0. resistant to hydrolysis and microbes. Other diameters are available on special order in the scope 30 ÷ 800 mm and color: black, blue, white and yellow. Assembly of the hose on connectors with bridge clamps (prawo-handed). Hose material: fabric polyester impregnated grey PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -30°C up to +80°C (momentarily up to +100°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. reinforced version hose NEOPRENE 1, o two layers fabric impregnated neoprene and spiral steel placed between layers. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o small radius bending enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: two fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: spiral with wire steel, on outside two cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible, having resistance to creasing hose intended for discharge air, fumes, dusts fibres, dust and other light substances. used in vacuum cleaners industrial. made with conductive polyethylene (PE) and elastomer, o low resistance material, excellent for applications in which required is avoiding accumulation charges electric (should then effectively earth hose). shaped in profile hose outer spiral reinforcing, left-handed, allows screwing on appropriate ends for vacuum cleaners with thread left e.g. ends plastic for hose EVA: DN32, 38 and 50 or appropriate ends conductive. Assembly of the hose with clamps on suitable ends, pipe spigots etc. is also possible. hose o diameter DN38 and DN50 has declaration conformity with requirements ATEX and standards TRGS 727 and It can be used in zones hazard explosion, under a condition effective earthing hose and carrying out through user analysis risk. Hose material: black special polyethylene (PE) and elastomer. Reinforcement: spiral reinforcing shaped in material hose. Operating temperature: od -20°C up to +60°C (podworking pressure depends on temperature).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, very flexible and pliable hose intended for discharge aggressive vapours chemical and gases, ventilation and air conditioning. good resistance chemical on solvents and other aggressive vapours. Checking chemical resistance - the chemical resistance table for polyethylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. used mainly in industry chemical. on request available diameter in the scope 40 ÷ 610 mm. hose occurs in two versions: P2PE - standard and P2PE EL - conductive electrically o resistance R ≤10 4 Ω, compliant with the directive ATEX 2014/34/EU and the standard TRGS 727, made with black polyethylene. Hose material: polyethylene (PE), transparent - version standard P2PE, black - version conductive electrically P2PEEL. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose medium wall thickness intended for extraction and conveying powders, grains, light granulates and other bulk materials. intended for use in industry food and pharmaceutical. used m.in. for milk in powder, grain, rice, coffee, tea, flour (version PAS). pliable, fairly compressible, almost smooth inside, flexible also in low temperatures. O sound resistance to abrasion, resistant to microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P7 OL PU FOOD – spiral with wire steel (copper-plated); P7 L PU PAS FOOD – spiral of steel stainless, Material hose permanently antistatic (R ≤10 8 Ω, in accordance with TRGS 727). hoses P7 OL PU FOOD and P7 L PU PAS FOOD are compliant with requirements European 1935/2004/EC and 10/2011/EU (simulant E), 2023/2006/EC (GMP) and American FDA 21 CFR 177.2600 and 178.2010. are suitable for time contact with food at conveying dry, bulk, free of fat on surface, substances food - on conditions defined in declaration conformity the manufacturer (Available in Tubes International). Hose material: transparent polyether-polyurethane. Wall thickness measured between the spiral: 0.7 mm. Reinforcement: spiral with wire steel (P7 OL PU FOOD), spiral with wire of steel stainless AISI 301 (P7 L PU PAS FOOD). Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Dla all types industry, in particular often used for dedusting and discharge fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, resistant also on microbes and hydrolysis. Not toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. hose marked is an arrow indicating correct direction flow medium. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: ECO – version standard, ECO SE – version with material flame-retardant (without classification flame retardancy), ECO AS – version permanently antistatic (ISO 8031: R 9 Ω, TRGS 727 (6.4.2.4): R 8 Ωm, directive 2014/34/EU (ATEX): It can be used in defined zones hazard explosion po analysis risk, ECO SE AS – version antistatic and flame-retardant (Available on special order). hose ECO produced is in process production compliant with with policy sustainable growth in which uses raw materials originating with recycling pure waste with process production, energy renewable, closed circulation water and other innovation. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, single-layer, very pliable and flexible hose intended for extraction hot vapours, fumes, gases, air blowing and discharge air cooling. resistant chemical, on radiation UV and aging. used m.in. for hot air in dryers granulate and blow-moulding machines film in processing plastics, in dryers paints in printing houses, other dryers industrial, in industry electronic, in vehicles and engines for air cooling, incineration plants, a also for extraction exhaust gases and gases welding. smooth inside (in state extended), o very small radius bends enabling easy installations in tight spaces equipment and vehicles. Assembly with clamps. Other diameters are available on special order. Hose material: fabric glass impregnated black rubber CR (neoprene® - rubber chloroprene). Reinforcement: inner spiral with wire steel, outer cable with fibre glass. Operating temperature: od -35°C up to +135°C (momentarily up to +150°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for discharge dusts, sawdust, chips in industry wood and furniture. designed for machine CNC for machining wood and plastics: centres machining, milling machines vertical, plotters milling. thick steel spiral coated white PVC is resistant to corrosion, has good adhesion for material hose and ensures high parameters pressure. despite strong the structure, thanks to optimal matched large surge spiral is very flexible, pliable and compressible. especially recommended for extraction dust and chips from under quickly moving heads working (CNC Router Dust Collection System). resistant to microbes, hydrolysis and oils and gasoline. Contains no halogen compounds or plasticisers. flame-retardant, compliant with the standard German DIN 4102 Class B1. hose can treat as conductive electrically po made earthing spiral, in accordance with German recommendations industrial BGI 739-2. Assembly on connectors with bridge clamps (prawo-handed). Other diameters are available on special order in the scope 80 ÷ 600 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel coated white PVC. Operating temperature: od -40°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, exceptionally flexible and pliable hose o sound resistance chemical and on radiation UV. resistant to hydrolysis and corrosion biological. Contains no halogen compounds or plasticisers. intended for discharge air, vapours and gases. used in industry chemical and in systems ventilation and air conditioning in vehicles. available other diameter in the scope 30 ÷ 610 mm. Checking chemical resistance - the chemical resistance table for polypropylene (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: black soft polypropylene (PP). Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose intended for discharge dusts, sawdust, chips, light bulk materials o properties abrasive. used in industry wood, construction, food. resistant to ozone. Wall thickness measured between the spiral. available other diameter in the scope 20 ÷ 600 mm. Hose material: transparent polyurethane. Reinforcement: copper-plated (version L/R) or galvanized (version L) spiral with wire steel. Operating temperature: od -40°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible and pliable hose intended for discharge vapours paints, solvents, contaminants air and dusts in spaces hazardous explosion. used also for conveying air in plants biogas. permanently antistatic (R ≤10 8 Ω), compliant with the standard technical TRGS 727 and the standard TRAS120 for plants biogas. resistant to hydrolysis and corrosion biological. Retains flexibility at low temperatures, flame-retardant - Meets the requirements of standards DIN 4102 B1 regarding properties fire materials construction. On special order available also other diameter in the scope 20 ÷ 800 mm. Checking chemical resistance - the chemical resistance table for PCV (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. Hose material: fabric polyester impregnated black PVC. Wall thickness: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +80°C.

















































