Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for low-pressure parts installation hydraulics power, compliant with the standard SAE 100 R6 and ISO 4079 R6. intended primarily for liquids hydraulic based on oil mineral and some synthetic liquids hydraulic. can be also used for liquids hydraulic based on water and for water and air at limiting temperatures up to +70°C (use for air can require microperforation layer outer). is suitable for many liquid products industry petrochemical: oils mineral and synthetic, oil drive and heating, glycol ethylene and other. Not recommended for gasoline and oils based on esters, not is suitable for hydrocarbons aromatic. Layer inner with black, smooth rubber synthetic. Reinforcement a braid textile. Layer outer with black rubber synthetic, resistant to abrasion, oil, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: a single textile braid. Outer layer: black synthetic rubber. Working pressure: from 12 bar to 28 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and light hose delivery, o wall small wall thickness, almost flat at rest, intended for use in heavy conditions. used m.in. for conveying water industrial and sewage, for pumps immersion, systems dewatering and irrigation, mobile irrigation. resistant to abrasion, conditions atmospheric and ozone. design hose allows its easy winding po use. assembly using bands or straps. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord polyester. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -25°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality rubber hose delivery manufactured in USA o layer internal made with resistant chemical polyamide (nylon). very smooth surface inner reduces losses flow and ensures ease cleaning. Reinforcement synthetic a braid textile ensures high resistance pressure and small deformation under pressure. smooth Layer outer with rubber synthetic, resistant to contact with chemicals and oil (RMA Class B – resistance medium). Dla hoses o diameter internal 1/4" and 3/8" Layer outer antistatic R 6 Ω. hose intended for applications industrial, in particular for solvents organic and substances petrochemical. good resistance polyamide on many solvents allows on use hose in industry paint, for conveying paints, varnishes, adhesives and resins. should always take into account resistance chemical and any problem electricity static. W particular antistatic hoses o diameters 1/4" and 3/8" are widely used as hoses for paints supply pressure Gun spray in workshops automotive, construction and industry. checking resistance chemical: table resistance chemical PA (selection initial), confirmation resistance and conditions use through Tubes International. assembly: should use fittings with spigot ("tail" for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with polyamide. possible is use typical ends hydraulic. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. assembly depending on pressure working hose clamps clamping, ferrules clamping or for greater diameters clamps shell. typical factory hoses for guns spray have often fittings bolted repeated use. Inner layer: polyamide (PA), without silicone. Reinforcement: textile braid single for 1/4" and 3/8", double od 1/2". Outer layer: black synthetic rubber. Working pressure: 52 bar. Operating temperature: od -20°C up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial high-pressure version hose PTFE SMOOTHBORE o thickened wall of specially processed PTFE (reduced micro-porosity) for applications with gases high-pressure in double braid (an aramid braid and steel) and with external layer with Hytrel. Layer outer with Hytrel made is in four colors: black, blue, green and red, for markings purpose hose for defined kinds gas. when required is simultaneously Layer inner HPG and antistatic AS, possible is use hose HPG/AS (color red), with additional thin layer antistatic AS inside basic layer internal with natural PTFE HPG. assembly: use fittings and ferrules series AF-TL... Hose material: smooth PTFE (teflon) HPG. Reinforcement: an aramid braid + braid of steel AISI 304. Outer layer: micro-perforated Hytrel (color polyester). Working pressure: 300 bar. Operating temperature: od -50°C up to +70°C (Due to layer external with Hytrel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying water or compressed air in systems irrigation, agriculture, mines, on squares construction etc. Layer inner smooth, co ensures minimal losses flow. Layer outer lightly longitudinally ribbed, co serves increasing resistance to abrasion and protection against contact with hot element. resistant to abrasion, ozone, conditions atmospheric, oil, fuels and wide range chemicals. lighter and more flexible than standard hoses rubber. flat at rest, co facilitates operation and storage. Not requires washing and drying. resistant to loads longitudinal – during unwinding and pulling (force longitudinal not should never exceed 1/3 given force breaking, assembly ends should take into account force longitudinal). use for air should be always preceded analysis risk in case accidental disconnection or bursting hose. Hose material: black blend NBR/PVC pressed in braid polyester-polyamide in process extrusion hose. Working pressure: from 10 bar to 25 bar (water), from 7 bar to 18 bar (air) - depending on the diameter hose. temperature use for water: od -20°C up to +80°C, momentarily up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose A universal intended for air, cold and hot water, oil, liquids hydraulic, light chemicals, diluted acids, liquids cleaning. strong and flexible, resistant to twisting and kinking. Layer outer non-staining, resistant to conditions weather, abrasion and oil. Due to high strength and low extensibility especially recommended for hose reels drum. The hose is non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: a synthetic braid. Outer layer: blue (red for diameter 15.9 mm) blend rubber Chemivic® (NBR/PVC). Working pressure: 21 bar. Operating temperature: od -29°C up to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conveying many substances chemical, mainly for solutions acids, bases, ketones, aldehydes, alcohols industrial and glycols. basic, classic rubber hose chemical. often used in plants industrial and treatment plants for discharge contaminants water and water process. appropriate also for water sea. Layer inner with antistatic (R ≤ 10 6 Ω/m) rubber EPR (other marking: EPM). Reinforcement with high-strength cord. Layer outer with rubber antistatic (R ≤ 10 6 Ω/m) EPR (EPM) resistant to chemicals, abrasion, ozone and conditions atmospheric. Layer inner and outer antistatic. Inner layer: black rubber EPM (EPR). Reinforcement: cord synthetic. Outer layer: black rubber EPM (EPR). Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement peroxide hydrogen. resistant to radiation UV, oxygen and ozone. Widely used in industry and equipment AGD. sterilization steam, oxide ethylene or radiation. Meets FDA requirements and BfR. Material: semi-transparent silicone. Hardness: 57° Shore (A). Density: 1.15 g/cm³. Operating temperature: od -50°C up to +200°C (momentarily +220°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery Light, flexible hose delivery, flat-folding, for water for hydrants and equipment being on equipment services firefighting. supplied with mounted couplings with aluminum type STORZ (complete line), compliant with conditions technical regulation MSWiA with 27.04.2010 r., has certificate approvals CNBOP-PIB. hose hydrant compliant with the standard EN 14540 used is in hydrants internal acc. to EN-671-2. hose for pumps used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used in industry, construction, agriculture and mining. Available also in version yellow luminescent (DN52, DN75, 20m, for pumps). can serve for conveying water, water sea, water industrial, solutions some substances chemical. Inner layer: insert PVC (PU for DN110). Reinforcement: a polyester braid. Working pressure: od 12 bar for 15 ba - depending on the diameter hose. Operating temperature: od -30°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, very flexible, unreinforced hose intended for pressureless (or under very low pressure) conveying air, water and liquids in use general-industrial, light chemicals (e.g. diluted acids and bases) and as A guard pipes, lines, cables etc. It can be used (in temperatures up to +40°C) for substances food such as juices, drinks, beer, wine, alcohols o a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. hose CRISTALLO EXTRA complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). The stated working pressure is the approximate value of the recommended working pressure at a safety factor of 5:1. Hose material: transparent PVC. Operating temperature: od -20°C up to +60°C, working pressure depends on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMultifunction, light, exceptionally pliable and flexible hose resistant to oil and gasoline. intended for air, water, oils, fuels, greases, chemicals (e.g. light acids and bases), pesticides, fertilisers etc. smooth Layer outer resistant to conditions atmospheric, aging, ozone, radiation UV, non-staining. popular and Widely used in industry, construction, agriculture, workshops automotive. Inner layer: black blend NBR/PU/PVC. Reinforcement: a polyester braid. Outer layer: black blend NBR/PVC. Working pressure: 25 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExceptionally flexible hose intended for compressed air. Due to such features as: lightness, flexibility in low temperatures, resistance to elongation is especially recommended for tools pneumatic, compressors, hose reels drum, etc. Inner layer: black PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. temperatures use: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality, very flexible, resistant to twisting and kinking A universal hose industrial. used in industry, construction, agriculture, quarries, mining and construction ways, in industry petroleum and shipbuilding. Layer inner resistant to action oil, fats, light chemicals, air, kerosene (naphtha), cold and hot water. Layer outer has very good resistance to abrasion and on fats animal and oils. Due to high strength and low expansion especially recommended for hose reels drum. outer resistance to flame compliant with the standard MSHA 2G-14C/39. Non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: an aramid braid, for 2" a synthetic braid. Outer layer: yellow rubber Carbryn® (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: od -29°C up to +88°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 10 bar. Operating temperature: od -40°C up to +120°C, outer up to +530°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension - ready rubber line for air made with hose MPX20. terminated brass socket and a plug quick coupling Eurostandard DN7.2 (matches for typical connections). Do use general, in particular for tools pneumatic, tam where required is hose rubber o properties antistatic. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for water and air. Widely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric, ozone and abrasion. Not is resistant to oil, not recommended also for air with mist oil. Inner layer: black EPDM rubber. Reinforcement: a polyester braid. Outer layer: red EPDM rubber. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C (momentarily up to 120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlack, opaque and flexible hose with fluoroelastomer (Viton), resistant to fuels, solvents, oils, chemicals, in particular at elevated temperature. used for concentrated acids, bases, alcohols, solvents chlorinated and aromatic, hot fuels and oils. is suitable for pumps peristaltic. resistant to aging, ozone, light solar and conditions atmospheric. flame-retardant. opaque black wall hose secures substances sensitive on light. used in laboratories and use general-industrial. constitutes economical alternative for hose VERSILONTM F-5500-A. length full roll hose 50 m (for diameter internal od 4 mm for 12 mm - 25 m, od 15 mm - 5 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber fluoro (FKM). Operating temperature: od -20°C up to +200°C (momentarily up to +300°C). temperature brittleness: -20°C. Hardness: 60° Shore (A) - for 4x6 mm, 70° Shore (A) - for 4x8 mm. Density: 1.90 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose silicone reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. length standard: 1000 mm (Available also in section 2000 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 0.86 bar to 8.75 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying almost all aggressive substances chemical. designed specially for industry petrochemical for fuels o high a concentration hydrocarbons aromatic, hot oil and solvents. Due to high general resistance chemical rubber FPM It can be used for aggressive chemicals, in many cases also in elevated temperatures. Layer inner with smooth black rubber fluorine FKM. Reinforcement cord synthetic. Layer outer with rubber chloroprene CR resistant to conditions atmospheric, ozone, abrasion and oils. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50 º C. Inner layer: black rubber FKM (FPM, Viton). Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 10 bar. Operating temperature: od -25°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector hose RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. Available in the molds simple a connector o length 1000 mm. Working pressure: from 0.6 bar to 3.7 bar, depending on the diameter a connector. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light hose multilayer o layer internal with resistant to abrasion and oil polyurethane, layer intermediate and outer with blend thermoplastic and PVC. very flexible, o small radius bending, not kinking. resistant to ozone, fats, oils and light chemicals. intended for compressed air and liquids. Widely used in industry for tools pneumatic, for air for guns for spray and painting paints based on water, sandblasting, etc. is suitable for mounting on drums. The inner layer has approval for food contact - compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Inner layer: transparent polyurethane. Intermediate layer: PVC/PU (color black). Reinforcement: a polyester braid. Outer layer: TPE / PVC (color turquoise). Working pressure at a temperature of 20°C: 20 bar. Operating temperature: od -15°C up to +60°C. As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, neutral biologically hose made in accordance with technology improvement peroxide hydrogen. retains properties chemical, electrical and mechanical in temperature up to +200°C. sterilization steam, oxide ethylene, radiation. meets standards FDA, BfR, USP (kl.VI), standards quality ISO 10993 (toxicity, irritation, cytotoxicity, hemolysis). Material: semi-transparent silicone. Hardness: 62° ±5° Shore (A). Density: 1.15 ±0.03 g/cm 3. Operating temperature: od -50°C up to +200°C (momentarily +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for conveying anhydrous ammonia in the molds liquid and gas. Layer inner with thick rubber antistatic (R≤10 6 Ω/m). Reinforcement with high-strength cord ensures high Safety factor 5:1. Layer outer with rubber antistatic (R≤10 6 Ω/m) resistant to chemicals, abrasion, ozone and conditions atmospheric, micro-perforated. hose compliant with requirements standards EN ISO 5771:2008 for hoses rubber for conveying anhydrous ammonia. hose intended in particular for ammonia in processes production fertilisers nitric, agents cleaning and for syntheses many compounds chemical. can be used in other fields industry, using anhydrous ammonia, such as refrigeration industrial (agent R717 – ammonia, used is in large installations refrigerant; hoses flexible serve primarily for filling installation), metallurgy and many other. hose can be also used for ammonia dissolved in water - water ammonia, used widely in industry m.in. in treatment plants sewage (regulator pH), for regeneration resins ion-exchange, in industry gum and plastics and for treatment water boiler. Inner layer: black synthetic rubber. Reinforcement: cord synthetic. Outer layer: black synthetic rubber, micro-perforated. Working pressure: 25 bar. Operating temperature: od -40°C up to +55°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). Meets the requirements of standards SAE J20 R4 Class D-1. available with arms o length 200, 250 and 300 mm. Working pressure: from 0.6 bar to 4.1 bar, depending on the diameter elbow. Operating temperature: od -40°C up to +125°C. factor safety (pressure bursting / maximum pressure working) 3:1. Material a connector: black EPDM rubber. Reinforcement: textile braid.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light, flat (at rest), delivery hose intended for conveying water. economical solution for average conditions use. used in agriculture, construction and in other fields industry. Available in two versions: HIFLAT LD (green) and HIFLAT HD (blue). Inner layer: black PVC. Reinforcement: spacer polyester. Outer layer: green PVC (LD), blue PVC (HD). Working pressure: from 2.5 bar to 10 bar - depending on the diameter hose and temperatures and type hose (LD, HD). Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPneumatic extension – ready line for air made with hose WTZ o diameter 10 mm and o length 10 or 15 m. terminated brass socket (TP-ES72-GK-10) and a plug (TP-ES72-WK-10) standard quick coupling pneumatic Eurostandard DN 7.2. the simplest solution for connection tools pneumatic. Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: 10 bar. Operating temperature: od -5°C up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose silicone Widely used in industry (e.g. in systems cooling and for hot air). exceptionally resistant to vapours oil mineral. hardness 65° Shore (A). Inner layer: blue silicone. Reinforcement: plies textile. Outer layer: blue silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 90° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Arm length: 100 mm (also available with arms of length 152, 250 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 1.83 bar to 8.75 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose general purpose reinforced a braid for compressed air, water, light chemicals. It can be used (in temperatures up to +40°C) for liquid and semi-liquid products food such as juices, drinks, beer, wine, alcohols o a concentration up to 50%, milk and its dairy products. Not recommended for oils and greasy food substances. hose REFITTEX CR complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C and D1), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure: from 5 bar to 30 bar, depending on the diameter hose. Operating temperature: od -20°C up to +60°C, working pressure depends on temperature.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, transparent, flexible hose made with patented elastomer thermoplastic for applications biotechnological. is suitable for use in pumps peristaltic. non-toxic, non-hemolytic and pyrogen-free o high class purity, easily weldable thermally, co is important in processes biotechnological. possible sterilization in autoclave, radiation and oxide ethylene. resistant to action concentrated acids and bases. meets requirements USP kl. VI. Hose material: elastomer thermoplastic. Hardness: 60° Shore (A). Operating temperature: od -45°C up to +135°C. features leading: welding thermal using C’eal-Flex™ TPE Ultra Sealer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light economical hose, flat at rest, intended for conveying water. economical solution for low pressures working and not requiring conditions use. used in agriculture e.g. for irrigation crops, construction and in other fields industry. Hose material: blue PVC. Reinforcement: spacer polyester. Working pressure: 3 bar. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality multifunction flexible hose manufactured in Great Britain. intended for water, air and light chemicals. The hose material contains no phthalates, silicone or cadmium and complies with the RoHS and WEEE regulations. In accordance with EU regulations, use for food products is possible after first carrying out the required migration tests using appropriate model fluids simulating the given type of food (the material used to make the hose complies with the requirements of 10/2011/EU and FDA 21). The hose material is self-extinguishing per UL94-V2 and UL94-HB (at a thickness of 3 mm). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: red (R) or blue (BL) PVC. Working pressure: from 10 bar to 18.3 bar - depending on the diameter hose. Operating temperature: od -20°C up to +55°C (momentarily +65°C, temperature bending on cold for -45°C). As the working temperature rises, the hose's working pressure value decreases.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery specially designed for transport water cooling, used at furnaces metallurgical, systems cooling transformers and transducers electric. used in metallurgy steel. Layer outer coated fiber glass resistant to action radiation heat up to +550°C (momentarily) and splashes hot materials. Layer inner insulating (dielectric), R>10 11 Ω, durable on breakdown electrical E≥6000 V/mm, o increased resistance to penetration water and steam at extreme parameters use. minimal radius bends in data technical stated is for pressure above 3 bar. Inner layer: light blue, insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -35°C up to +120°C, outer up to +550°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made in accordance with technology improvement platinum o exceptional purity, intended for applications biotechnological. resistant to action high temperatures, ozone, radiation radiation, moisture, action conditions atmospheric. Not adsorbs and not absorbs odour ani taste. can be repeatedly sterilised in autoclave a also oxide ethylene or by radiation. Meets FDA requirements, USP kl. VI, ISO 10993, European Pharmacopoeia 3.1.9 and Japanese Pharmacopoeia - section 51. Safety factor 5:1. Material: transparent silicone. Hardness: 50° Shore (A). Density: 1.17 g/cm³. Operating temperature: od -65°C up to +260°C. length hose: 7.62 m, 15.24 m or 30.48 m.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 180° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Standard arm length: 102 mm. pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 2 bar to 8.12 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, crystalline transparent, flexible hose chemical o multilayer the structure with inner layer with fluoropolymer FEP o unique resistance and inert chemical. Characterized significantly greater flexibility than rigid hoses made completely with PTFE or other fluoropolymers. smooth Layer inner, resistant and inert chemical eliminates risk contamination liquid. resistant to wide range substances chemical od substances corrosive for solvents based on MEK. hose Meets the requirements of hygienic and for contact with food: American FDA 21 CFR 177.1550, not contains phthalates ani BPA (bisphenol A), is non-toxic, not leaves odour ani taste. sterilization oxide ethylene. Used in various industrial applications: flow chemicals, substances pharmaceutical, drinks food, production and packaging paints, solvents and adhesives, for inks and toners, for chemicals photographic, fertilisers and pesticides, in production semiconductors. length full roll hose 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: FEP / PVC special. Maximum Operating temperature: +74°C. temperature brittleness: -36°C. Hardness: 66° Shore (A). Density: 1.21 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose delivery flat-folding of couplings for water for pumps fire-protection. used is for motor pumps firefighting, rescue and services forest. besides function fire-protection Widely used for conveying water in industry, construction, agriculture and mining. Layer inner smooth, resistant to mould and rotting. Layer outer (braid) o high strength, with coating polyurethane, not taking dirt, increasing resistance to abrasion and contact with flame. certificates: hoses compliant with conditions technical regulation MSWiA with 27.04.2010 r.., hoses of couplings (A complete lines) have certificate approvals CNBOP-PIB. Inner layer: smooth polyurethane. Reinforcement: a polyester braid. Outer layer: red coating polyurethane. Working pressure: from 12 bar to 15 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSilicone hose delivery REDSIL, has versatile use in wide the scope temperatures. uses go both for hot air, as and e.g. in systems cooling. intended for liquids and gases, used in many branches industry between other chemical. Inner layer: transparent silicone. Reinforcement: olpot PET (polyester). Outer layer: red silicone. Hardness: 70° ±5° Shore (A). Operating temperature: od -50°C up to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow silicone 45° reinforced polyester intended is for systems cooling and systems heating in vehicles (water, liquids cooling, air clean or with small amount mist oil). Do oils, fuels and mist oil recommended is version with layer inner fluorosilicone. Arm length: 100 mm (also available with arms of length 152, 250 mm). pressure factor safety: 3:1. hose meets standards SAE J20R1. hardness (version standard) ok. 65° Shore (A), density ok. 1.26 g/cm³. color layer outer: blue. Material: rubber silicone. Reinforcement: plies polyester. Working pressure: from 1.5 bar to 8.33 bar (depending on the diameter hose). Operating temperature: od -50°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKnown and proven od lat, light and soft hose with rubber natural o light brown color. easy for installation thanks to its softness (hardness 40° Shore – A), flexible and flexibility (Maximum extensibility 500%). has close properties for latex. resistant to abrasion, o sound resistance to acids and bases. used for liquids and gases, for many applications industrial e.g. dispensing and dosing soaps and detergents, products alcoholic and milk, laboratories. Sterilization steam 30 min. (1 bar, 141°C) or oxide ethylene. length full roll hose 50 m (od diameter internal 7 mm - 25 m). The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: rubber natural (NR). Operating temperature: od -35°C up to +70°C (120°C for moist hot). temperature brittleness: -40°C. Hardness: 40° Shore (A). Density: 0.98 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
