Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very pliable and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant to steam o high temperature. Layer outer resistant to high temperature and conditions atmospheric. Do steam water use special fittings bolted screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black EPDM rubber. Reinforcement: a double steel braid. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +230°C).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance to high temperature and steam saturated. Layer outer resistant to temperature, abrasion, conditions atmospheric and ozone. hose Widely used in industry for low-pressure steam saturated – for light applications. Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 6 bar. Operating temperature: od -40°C up to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose delivery made in accordance with technology improvement platinum. Layer inner hose extruded. compliant with requirements FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV A, Journal Officiel Brochure 1227 and directives CE 1935/2004. at temperature use above +100°C maximum pressure working given in tables should reduced o 1% on each 1°C rise temperatures. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester. Outer layer: semi-transparent silicone. Operating temperature: od -60°C up to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible pressure hose delivery general purpose. used for air, water, light chemicals and liquid and semi-liquid products food such as water, juices, drinks, beer, wine, alcohols o a concentration up to 50% (and up to 20% for hoses o index SO-PVCSTAR-CR). Not recommended for substances food containing fats and oils. is suitable for milk and its dairy products (not is suitable for milk and products milk hose o index SO-PVCSTAR-CR). free of phthalates. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1). Dla hoses o index SO-PVCSTAR-CR: 1) general: EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). Hose material: transparent PVC. Reinforcement: a polyester braid. Working pressure: from 8 bar to 22 bar, depending on the diameter hose. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for conveying and handling oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (up to 50% compounds aromatic). It can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers strength cord synthetic. It has a copper wire ensuring electrical continuity between the hose ends. Layer outer with rubber chloroprene CR, flame-retardant, resistant to abrasion, ozone, water sea and conditions atmospheric. Designed as a specialist OFFSHORE hose for use on drilling platforms. Widely used on platforms Sea North. can be with success used in use onshore. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black rubber CR. Working pressure: 20 bar. Operating temperature: od -30°C up to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conveying liquid products industry petrochemical containing up to 50% hydrocarbons aromatic, fuels, gasoline, oil drive, heating, oils lubricating etc. Layer inner with black, smooth rubber NBR. Reinforcement cord synthetic. has cable copper ensuring continuity electrical between fitting hose – under a condition correct connection for ends. Layer outer with black rubber NBR, resistant to oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for conveying fuels or other compatible media in typical conditions use. Inner layer: black NBR rubber. Reinforcement: cord synthetic. Outer layer: black NBR rubber. Working pressure: 10 bar. Operating temperature: od -30°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. especially recommended and Widely used in hospitals and ambulances. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium - blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong industrial hose delivery for water and for compressed air, intended for use in heavy conditions in industry, construction ways, a even in quarries. Layer inner resistant to mist oil. resistant to abrasion and conditions atmospheric. commonly used and proven in various use industrial. hose Available in colour black and yellow. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality thin-walled hose type BARRIER for flow freon in single braid polyester for use in automotive and industrial systems air-conditioning and refrigerant working based on freon R134a, R1234yf, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to abrasion and conditions atmospheric. standards: SAE J2064 type C Class I. Inner layer: black rubber CR divided layer nylon (PA). Reinforcement: a polyester braid. Outer layer: black rubber CIIR, micro-perforated. Working pressure: 35 bar. Operating temperature: od -35°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (e.g. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: od -40°C up to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installation, chemicals, paints, adhesives, fuels liquid and gas, oils, greases, air, gases, water, steam and liquids based on water. used we all types industry. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. It can be used also as mechanical guiding cables or tie rods Due to low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: smooth PTFE (teflon). hardness Shore (D): 58. Operating temperature: od -200°C up to +260°C. Working pressure: from 2.3 bar to 10.8 bar - depending on the diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant to high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black or red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon type BARRIER (thick-walled) intended for automotive and industrial systems refrigerant and air-conditioning working based on freon R134a, R12, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to oil, abrasion and conditions atmospheric. standards: SAE J2064 type C Class II. Inner layer: black rubber CR, Layer nylon (PA). Reinforcement: two braids polyester. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on the diameter hose. Operating temperature: od -30°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose welding for oxygen made acc. to standards ISO 3821. is characterized resistance on kinking and action conditions atmospheric. Not recommended for gases generated based on fuels, oils and gas LPG. Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: blue smooth rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE SB (HYDRAFLON) has layer inner made with high quality seamless PTFE ensuring minimal porosity, maximum flexibility and resistance to vibration. braid made is with treated thermally wire of steel stainless AISI 304 o strength 1700 MPa. used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water, etc. - as well as for classic installation high-pressure oil hydraulic. hose HYPERLINE SB is version hose SMOOTHBORE of wall o medium wall thickness and diameter internal adjusted for standard ends hydraulic; assembly using standard straight jaws clamping. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses HYPERLINE SB, in version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. at temperature use above +130°C maximum pressure working should reduced o 0.75% on each 1°C rise temperatures. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 80 bar to 350 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and washing installation and machine in industry food steam water and hot water. Layer inner Meets FDA requirements 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant to fats vegetable and animal. hose high quality, commonly used for cleaning and washing hot water or steam installation and machine in industry food (e.g. dairies, industry meat). Note: not should use hose simultaneously for water and steam water. Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. length standard roll: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: cord synthetic. Outer layer: blue NBR rubber/PVC. Working pressure: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). Operating temperature: od -30°C up to +165°C (od -30°C up to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon o high diameter intended for automotive (especially trucks and buses) and industrial systems refrigerant and air-conditioning working based on freon R 134a and R404a and oils mineral and synthetic PAG and POE. Layer outer resistant to oil, abrasion, high temperature and conditions atmospheric. standards: SAE J2064 type B (dimensions SAE 100R5). assembly: use bolted or crimped fittings special. Inner layer: black rubber IIR. Reinforcement: a steel braid. Outer layer: black rubber CSM, micro-perforated. Working pressure: 35 bar. Operating temperature: od -40°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery, very flexible, resistant to aging, ozone, conditions weather and abrasion. intended for air, water and light chemicals: non-oxidizing, diluted acids (e.g. hydrochloric and sulfuric), diluted bases, solutions salts, alcohols, acetone, ketones, coolants based on glycols. Not is suitable for oils, fuels, hydrocarbons aromatic. It can be used for various paints water-soluble and based on ketones and esters. Not is suitable for paints cellulose, chlorinated-rubber and other containing solvents aromatic (e.g. toluene, xylene) or gasoline. Layer inner and outer antistatic R 6 Ω in accordance with EN ISO 8031:2009. Inner layer: black EPDM rubber. Reinforcement: single or double (DN 32÷38) textile braid spiral. Outer layer: black EPDM rubber. Operating temperature: od -40°C up to +120°C (momentarily up to +140°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installation chemicals, paints, fuels, oils, greases, air, gases, water, steam and liquids based on water – we all types industry. as inert chemical and free of components, which could penetrate for medium internal, It can be used for substances food. compliant with FDA 21 CFR 177.1550, EU 10/2011, EC 1935/2004 and Italian D.M. 174 06/04/2004. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. It can be used also as mechanical guiding cables or tie rods Due to low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 3:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Hose material: PTFE (teflon). Operating temperature: od -60°C up to +260°C. Working pressure: from 3 bar to 56 bar - depending on the diameter and wall thickness wall hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible pressure hose, PVC general purpose and for products food. used for compressed air, water, liquids refrigerant based on water, light chemicals and liquid and semi-liquid products food. smooth wall inner reduces losses flow and ensures ease cleaning. W industry food It can be used for conveying food hydrated, acidic, alcohols up to 20% e.g. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C and 0.5 h). Not recommended for milk and dairy products or food substances containing fats and oils. hose RAGNO CR complies with the European requirements 1978/142/EEC, 1935/2004/EC, 1895/2005/EC and 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Inner layer: transparent PVC. Reinforcement: a polyester braid. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 8 bar to 20 bar - depending on the diameter hose. The working pressure value decreases as the temperature rises. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIndustrial hose for cold and hot water for heavy conditions use, demanding high flexibility, resistance to abrasion, conditions atmospheric and ozone. used m.in. for cooling and temperature control moulds injection. It can be used for air. use for temperatures above +95°C reduces service life hose. Not is resistant to oil, not recommended also for air with mist oil. recommended assembly rings or ferrules clamping. Inner layer: black EPDM rubber. Reinforcement: a synthetic braid. Outer layer: black, blue or red EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +95°C (20 bar), od -30°C up to +140°C (10 bar), momentarily up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight transparent smooth hose with natural (non-regenerated) polymer fluorine FEP (fluorinated ethylene propylene), material o properties close for PTFE. hose is characterized excellent resistance chemical, stability temperature dimensions and shape, smooth surface inner and external. good transparency hose allows on easy observation level or flow liquid. resistant to radiation UV. intended for low-pressure installation aggressive substances chemical or when required is high cleanliness and inert chemical material hose. used commonly in laboratories, industry chemical and pharmaceutical. Due to excellent properties insulating used in industry electronic and semiconductors. hose not is antistatic (not dissipates charges electric for substances non-conductive). not recommended for pneumatic fittings push-in. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. Hose material: FEP. hardness Shore (D) 55. Operating temperature: od -200°C up to +206°C. Working pressure: from 4.25 bar to 13 bar - depending on the diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible, resistant to kinking and action conditions atmospheric hose welding for acetylene made acc. to standards ISO 3821. Not recommended for gases generated based on fuels, oils and propane - butane (LPG). Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: smooth red rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong and flexible hose delivery compliant with dimensions and requirements standards EN ISO 6134:2005 type 2 class A (Ω), of reinforcement steel, intended for conducting steam saturated and superheated. Layer inner o sound resistance to high temperature and steam saturated. It can be used momentarily for steam superheated o temperature 232°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to temperature, conditions atmospheric, abrasion and aging. antistatic R ≤10 6 Ω. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: double cord with wire steel. Outer layer: black EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose smooth with PTFE o excellent resistance chemical in various versions color. made with high quality PTFE with addition dye (Material compliant with FDA). Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). use for high quality fittings push-in is possible. factor safety n=4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material: PTFE (teflon), colored. hardness Shore (D): 60. Working pressure: od 5.5 up to 20 bar. Operating temperature: od -200°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for water cooling in smelters, foundries and we all use, where hose rubber works close source heat. coated fiber glass resistant to temperature up to +530°C caused radiation thermal. used in systems cooling. especially recommended for installation water at furnaces metallurgical. resistant to momentary action splashes red-hot hot metal. non-conductive – resistance electrical blend rubber ≥108 Ω/m. Inner layer: white insulating EPDM rubber. Reinforcement: cord synthetic. Outer layer: EPDM rubber coated fiber glass. Working pressure: 20 bar. Operating temperature: od -40°C up to +120°C (outer up to +530°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery intended for conveying LPG (molten and gas) and gas natural. Layer outer resistant to action ozone and conditions atmospheric. antistatic (R 6 Ω/m). It has a copper wire ensuring electrical continuity between the hose ends. made in accordance with the standard EN 1762:2018, type D. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: black micro-perforated synthetic rubber. Working pressure: 25 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. - as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170ºC maximum pressure working for hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 55 bar to 240 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnreinforced and very flexible hose with transparent PVC intended for pressureless (or under very low pressure) conveying water, beer, wine, alcohols o a concentration up to 20%, juices, drinks, other liquids food. Not is recommended for milk and products milk and for oils and greasy substances food. used also for liquids in use general-industrial, for light chemicals (e.g. diluted acids and bases) and as A guard pipes, lines, cables etc. For the hose, the stated pressure value is the approximate value of the recommended working pressure, assumed for a typical PVC hose, at a safety factor of 5:1. Use of the hose at a specific working pressure should be preceded by a test under operating conditions. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Hose material: transparent PVC. Working pressure: low, up to a few bar, depends on temperature. Operating temperature: od -5°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWidely used for washing hot water floors and equipment industrial. is suitable also for use external. resistant to conditions atmospheric and abrasion. Not is resistant to oil, not recommended also for air with mist oil. W comparison with a hose "Tubes 2116" has thicker wall. Inner layer: white EPDM rubber. Reinforcement: a polyester braid. Outer layer: red or blue EPDM rubber micro-perforated. Working pressure: 10 bar. Operating temperature: od -40°C up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose o smooth surface internal intended for compressed air, water, light chemicals, agents fungicidal, fertilisers and pesticides. commonly used in agriculture for sprinkling, irrigation, spraying. Layer outer resistant to abrasion and conditions atmospheric. Inner layer: black PVC. Reinforcement: a polyester braid (double polyester braid for version REFITTEX 80 BAR). Outer layer: black PVC. Working pressure at a temperature of 20°C: 20 bar (white stripe), 40 bar (blue stripe), 80 bar for diameter internal 13 mm, above 50 bar (red stripe). As the working temperature rises, the hose's working pressure value decreases. Operating temperature: od -20°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble hose welding for oxygen and acetylene. made according to standards ISO 3821. Inner layer: black synthetic rubber. Reinforcement: double polyester braid. Outer layer: smooth synthetic rubber in color red (acetylene) and blue (oxygen). Working pressure: 20 bar. Operating temperature: od -32°C up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. version thick-walled HW recommended is for heavier conditions use, gases (up to 100 bar) and for applications in which available cyclic changes temperatures use. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. - as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-HWSB-06 is: 260 bar – (170°C-130°C) x 0.75 = 260 bar – 30% = 182 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 55 bar to 240 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended specially for conveying AdBlue ® (AUS32, DEF) - 32.5% water solution urea. layer inner hose constitutes black, smooth, antistatic (R‹10 6 Ω/m) EPDM rubber vulcanized without content sulfur. Layer inner hose not is contaminants additives aluminum, calcium, chlorine, copper, iron, potassium, magnesium, sodium, nickel and zinc, co guarantees retention the highest purity medium in accordance with the standard ISO 22241-2. is to especially important in industry automotive, in which AdBlue ® fully role regulator in order to decomposition in catalyst SCR harmful for environment oxides nitrogen. its use allows on meeting European standards emissions exhaust gases EURO 4, 5 and 6. liquid AdBlue ®, to was effective, must be very clean, co forces use specialized hoses, tanks and fittings resistant to AdBlue® and non-contaminating go. fittings and fittings for AdBlue ® should be made of steel stainless or appropriate plastic. except for automotive, hose used is also in industry chemical, on example at production fertilisers nitric. Inner layer: black EPDM rubber. Reinforcement: a synthetic braid. Outer layer: black EPDM rubber. Working pressure: 10 bar or 20 bar. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for conducting steam saturated, o sound resistance to high temperature, abrasion and ozone. on request Available hose acc. to standards EN ISO 6134:2005 type 1 class A. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: 6 bar. Operating temperature: od -40°C up to +165°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, strong hose intended for lances oxygen in industry metallurgical. Layer outer self-extinguishing made in accordance with the standard ASTM C 542. Inner layer: black rubber CR. Reinforcement: double cord textile, spacer with fibre glass. Outer layer: yellow or blue rubber CR. Working pressure: 30 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for hot water mixed with fluids anti-freeze. used in systems cooling and heating, for pumps in engines and machines. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. made in accordance with the standard DIN 73411:79. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: from 2 bar to 4 bar - depending on the diameter hose. Operating temperature: od -40°C up to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible hose delivery of reinforcement steel for conducting steam saturated. Layer inner o sound resistance to high temperature, steam saturated and phenomenon pop-corningu (destruction layer internal through penetration condensate steam). withstands momentarily steam superheated o temperature 230°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. factor safety: 10:1. length standard: 60 m. Inner layer: black rubber IIR. Reinforcement: double cord with wire steel. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal flexible high quality hose polyurethane with a braid manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. hose strong od similar hoses, PVC, retaining its shape, resistant to kinking, hydrolysis and abrasion, flexible in low temperatures. Contains no cadmium, silicone, plasticisers or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: a polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at a temperature of 20°C: from 10 bar to 20 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C (momentarily +100°C). As the working temperature rises, the hose's working pressure value decreases.
