Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight hose suction-delivery intended for transfer milk and substances food, demanding use rubber free of smell and taste. Nie contains plasticizers, phthalates ani substances origin animal. special The design hose "CRUSH PROOF" of spiral with plastic allows return hose pod pressure for primary shape po accidental running over go np. truck forklift. hose is light and easy for handling. hose designed primarily for unloading milk with tankers. Nie recommended for heavy conditions use in use process. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: EC 1935/2004, EC 2023/2006 (GMP). Layer inner compliant with D.M. 21/03/73, FDA 21 CFR 177.2600, BfR, RAL (German institute ensuring quality and certification. Inner layer: white mixture NR/NBR. Reinforcement: braid synthetic, spiral PET. Outer layer: blue rubber synthetic. pressure working: 16 bar. Vacuum: 0.7 bar. Operating temperature: from -30°C to +85°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring substances food, demanding use rubber free of smell and taste. Nie contains phthalates and bisphenol A. Layer inner with NBR/PVC resistant na used standard in industry food agents and processes cleaning. appropriate for milk and its products and fatty substances food. wide used in industry food in standard conditions use. Standards and requirements: Food industry, food contact: 1935/2004/EC and 2023/2006/EC (GMP). D.M. 21/03/73, FDA 21 CFR 177.2600, BfR XXI kat. 2. Inner layer: white rubber NBR/PVC. Reinforcement: braid synthetic, spiral steel. Outer layer: blue rubber synthetic. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -15°C to +90°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and very flexible and flexible hose delivery of reinforcement two braids steel intended for conducting steam saturated o higher pressure. Layer inner resistant na steam o high temperature. Layer outer resistant na high temperature and conditions atmospheric. Do steam water use special fitting screw-together screws intended for steam water – precisely selected for diameter and wall thickness hose. in order to elongation service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: double braid steel. Outer layer: red rubber EPDM, micro-perforated. pressure working: 18 bar. Operating temperature: from -40°C to +210°C (momentarily up to +230°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction-delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner with UPE resistant na most aggressive chemicals, antistatic (R 6 Ω), compliant with requirements for hoses food, smooth, o low coefficient friction during flow, protecting deposition medium na walls. facilitates to significantly cleaning and allows na use also in industry cosmetic, pharmaceutical and food. Reinforced with synthetic cord and steel spirals. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone, conditions atmospheric, fire-resistant. compliant with requirements EN 12115:11 type Ω/T, completely antistatic - ensures discharge charges electrostatic also through wall hose (R 9 Ω). allows to use hose in zones hazard explosion. hose wide used for many applications in industry chemical. standards and requirements: hoses chemical: EN 12115:2011 (type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, C, D2). installing: should use fitting with a spigot ("a tail" for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. Diameter spigot should be precisely matched for diameter hose in order to ensuring tightness. installing sleeves clamping or clamps shell. confirmation resistance and conditions use requires contact with Tubes International, in particularly for temperatures above 50°C. Inner layer: black polyethylene UPE. Reinforcement: cord textile, spiral steel. Outer layer: black rubber EPDM. pressure working: 16 bar. Operating temperature: from -30°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction - delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth, antistatic (dissipating charges electrical 10 4 Ω 9 Ω) rubber NBR. Reinforced with synthetic cord and steel spirals. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spirals steel. Outer layer: black rubber NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -35°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery RIG STAR D and suction - delivery RIG STAR SD intended is for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber CR. pressure working: 20 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose suction-delivery intended for transferring fuels and liquid products industry petrochemical, containing for 50% compounds aromatic, m.in. gasoline, oil drive and oil mineral. can be used for tankers, tanks, stations loading, equipment industrial. hose wide used in industry and transport in standard conditions use. Layer inner with smooth, black, antistatic (R 6 Ω/m) rubber NBR. Reinforcement cord synthetic and spiral steel. has two cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber SBR/NBR, antistatic (R 6 Ω/m), resistant na abrasion, oil, ozone and conditions atmospheric. Inner layer: black rubber NBR. Reinforcement: cord synthetic, spiral steel. Outer layer: black rubber SBR/NBR. pressure working: 10 bar. Vacuum: 0.9 bar. Operating temperature: from -30°C to +85°C (for +100ºC for oil).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft and flexible hose delivery o reinforcement textile intended for conducting steam saturated. Layer inner o sound resistance na high temperature and steam saturated. Layer outer resistant na temperature, abrasion, conditions atmospheric and ozone. hose wide used in industry for low-pressure steam saturated – for light applications. For water steam, use special fittings bolted with screws, intended for water steam. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. Inner layer: black rubber EPDM. Reinforcement: synthetic cord. Outer layer: black rubber EPDM, micro-perforated. pressure working: 6 bar. temperature use: from -40°C to +170°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum, resistant na UV and ozone. compliant with requirements 1935/2004 CE, FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopeia 3.1.9, BfR XV, Journal Officiel Brochure 1227. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. factor safety is 4:1. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral steel (AISI 316). Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction-delivery hose made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements with FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV, Journal Officiel Brochure 1227 and directives CE 1935/2004. maximum vacuum 736.6 mm Hg (0.98 bar). At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester, spiral of steel AISI 316. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality hose delivery made in accordance with technology improvement platinum. The inner layer of the hose is extruded. compliant with requirements FDA 21 CFR 177.2600, USP kl. VI, European Pharmacopoeia 3.1.9, BfR XV A, Journal Officiel Brochure 1227 and directives CE 1935/2004. At a working temperature above +100°C, the maximum working pressure given in the tables should be reduced by 1% for each 1°C rise in temperature. Inner layer: semi-transparent silicone. Reinforcement: four braids polyester. Outer layer: semi-transparent silicone. Operating temperature: from -60°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose suction-delivery intended for water, juices, beverages and other products food, reinforced has been spiral with hard PVC, through co hose gained also na lightness. additional resistant na impact spiral, ensures good strength na vacuum and kinking hose. transparent wall whereas, facilitates easy control visual flow medium, a no phthalates in material, use hose for transferring milk and its products and alcohols o concentration for 50%. not recommended is for oils and fatty substances food. smooth surface inner reduces losses flow and ensures ease cleaning. outer surface also smooth, facilitates installing ends using bands or straps, reduces damage external in result abrasion and facilitates maintaining hose in cleanliness. as hose reinforced only spiral with hard PVC, nie having braid, pod pressure undergoes certain elongation, co should take into account in use, particularly in temperatures above 40°C. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral with hard PVC. pressure working: from 5 bar to 7 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible pressure hose delivery general purpose. used for air, water, light chemicals and liquid and semi-liquid products food such jak water, juices, beverages, beer, wine, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-CR). Not recommended for food substances containing fats and oils. is suitable for milk and its products (nie is suitable for milk and products milk hose o index SO-PVCSTAR-CR). free of phthalates. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1). Dla hoses o index SO-PVCSTAR-CR: 1) general: EU 2015/863 (RoHS 3), EC 1907/2006 (REACH). 2) industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). Material hose: transparent PVC. Reinforcement: braid polyester. pressure working: from 8 bar to 22 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, very flexible hose suction-delivery intended for water, juices, beverages, alcohols o concentration for 50% (and for 20% for hoses o index SO-PVCSTAR-MS), and other products food. Not recommended for food substances containing fats and oils. is suitable for milk and its products (with railway nie is suitable for milk and products milk hose o index SO-PVCSTAR-MS). Reinforcement spiral with wire steel, embedded in wall, PVC, ensures good resistance na vacuum and kinking hose. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows na easy control visual flow. at the absence direct contact with food (in industry, construction, agriculture) can be used for light chemicals, water, sludge and sewage, other liquids (without fat, oils and carbon). as hose without braid is characterized certain elongation pod pressure. Standards and requirements: Food industry, food contact: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B, C and D1), 2023/2006/EC (GMP). Dla hoses o index SO-PVCSTAR-MS: industry food, contact with food: compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C), 2023/2006/EC (GMP). Material hose: transparent PVC. Reinforcement: spiral steel galvanized. pressure working: od 6 bar for 11.5 bar, depending on diameter hose. Operating temperature: from -15°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible, flexible and almost smooth inside hose intended for extraction and transferring dusts, powders, granulates, grain, flakes and similar light materials o properties abrasive. thanks to made with polyether–polyurethane has good resistance na abrasion, ozone, conditions atmospheric, hydrolysis and corrosion biological. is suitable for contact with food in the scope transferring bulk and liquid materials food, in this fatty or oily. Nie recommended for milk and its products. Reinforcement spiral with hard PVC ensures good resistance na crushing. version antistatic hose has copper cable anti-electrostatic embedded with outer side hose along spiral reinforcing. effective grounding cable ensures sufficient for many applications level discharge charges electrostatic. used in particularly in industry agricultural–food, plastics, materials construction itp. hose WIND STAR PU is compliant with the European requirements 10/2011/EU (simulants A, B, C, D2 and E), and American FDA 21 CFR 177.2600 „d”, „e”, „f” (dry, liquid-water, fatty). information additional regarding applications food and pharmaceutical – see section „hoses for products food”. Material hose: transparent polyether- polyurethane. Reinforcement: spiral with hard PVC. Operating temperature: from -40°C to +80°C (pressure working dependent od temperatures).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose delivery intended for transferring and transfer oil petroleum, products petrochemical and cuttings drilling mixed with oil petroleum (for 50% compounds aromatic). can be used also for cement, barite, water sea and brine. Layer inner with black, smooth, antistatic rubber NBR. Reinforcement layers strength cord synthetic. has copper cable ensuring continuity electrical between fitting hose. Layer outer with rubber chloroprene CR, flame-retardant, resistant na abrasion, ozone, water sea and conditions atmospheric. designed as specialized hose OFFSHORE for operation na platforms drilling. wide used na platforms sea northern. can be with success used in use land. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber CR. pressure working: 20 bar. Operating temperature: from -30°C to +85°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery intended for transferring liquid products industry petrochemical containing for 50% carbon aromatic, fuels, gasoline, oil drive, heating, oils lubricating itp. Layer inner with black, smooth rubber NBR. Reinforcement cord synthetic. has cable copper ensuring continuity electrical between fitting hose – pod a condition correct connection for ends. Layer outer with black rubber NBR, resistant na oil and conditions atmospheric. relatively small weight and flexible The design hose makes, that hose is easy for handling, is characterized wide, universal use for transferring fuels or other compatible media in typical conditions use. Inner layer: black rubber NBR. Reinforcement: cord synthetic. Outer layer: black rubber NBR. pressure working: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. especially recommended and Widely used in hospitals and ambulances. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium - blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThis extremely lightweight and highly flexible hose is engineered for the efficient transport of air, oil and fuel vapors, dust, powders, fine wood shavings, chips, and other light bulk materials, making it an indispensable solution across multiple industries. Perfectly suited for dust extraction and the removal of vapors and fine particles in woodworking, furniture, ceramics, and plastics production, it combines excellent axial compressibility with reliable flexibility even at very low temperatures. The hose offers strong abrasion resistance, and in its AS version, manufactured from polyester, it is additionally resistant to microbes and hydrolysis. Free from halogen compounds and plasticizers, non-toxic, and resistant to oils and gasoline, it ensures safe and durable performance. Designed for easy installation with bridge clamps on couplings, it can also be produced in custom diameters upon request. Available in two versions—P2 PU, made of polyester-polyurethane with outstanding abrasion resistance, and P2 PU AS, the antistatic variant (R ≤10⁸ Ω, compliant with TRBS 2153 and TRGS 727) that provides enhanced safety in demanding environments—this transparent hose features a 0.4 mm wall thickness between the steel wire spiral reinforcement. With an operating temperature range from -40°C to +100°C, and short-term resistance up to +125°C, it delivers reliability, versatility, and long-lasting performance in even the most challenging industrial applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThis heavy-duty industrial suction hose is engineered for reliable performance in the toughest working environments, from demanding industrial facilities to road construction sites and quarries. Its inner layer, made of durable black SBR rubber, is resistant to oil mist, ensuring long-lasting efficiency even under intensive use. Reinforced with a strong synthetic cord and protected by an abrasion- and weather-resistant EPDM outer layer in black or yellow, the hose guarantees durability and safety in all conditions. With a working pressure of up to 20 bar and an impressive operating temperature range from -30°C to +70°C, it delivers consistent performance across a wide spectrum of applications. Available in standard 60 m lengths, with the option of 120 m upon request, this versatile hose has been tested and proven in countless industrial operations, making it a trusted solution for water and compressed air transfer where strength, flexibility, and resilience are essential.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, semi-transparent, flexible hose with rubber silicone vulcanized platinum. used in industry pharmaceutical, cosmetic and biotechnology, equipment medical, culture cells, sterile lines filling, for water for injection (WFI), in chemistry and analyzers blood, in chromatography liquid. can be used in pumps peristaltic – moderate service life. is characterized exceptionally smooth surface inner prevents deposition and adhesion contamination inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, nie toxicity, nie hemolyticity and nie pyrogenicity ensures total cleanliness liquids we sensitive use. meets requirements hygienic American FDA 21 CFR 177.2600, NSF-51, 3-A and USP Class VI and ISO 10993 for contact with blood, fluids body and tissues for 30 dni. possible sterilization steam (30 min, 1 bar, 121°C), oxide ethylene or radiation (for 2.5 Mrad). Length of a full hose roll 15 m. hose Available in sizes inch and metric. pressure working determined relative to pressure bursting at factor safety 1:5. Material: silicone (platinium). Maximum operating temperature: +204°C. temperature brittleness: -80°C. Hardness: 50° Shore (A). Density: 1.14 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe high-performance thin-walled BARRIER hose is engineered for reliable refrigerant transfer in both automotive and industrial air conditioning and refrigeration systems. Designed for compatibility with R134a, R1234yf, R404a, Suva MP52, and R22, it works seamlessly with mineral and synthetic oils including PAG, POE, and PVE. Its advanced construction features a black CR rubber inner layer with a nylon (PA) barrier, reinforced by a durable polyester braid, and protected by a black CIIR rubber outer layer with micro-perforation. This combination ensures excellent resistance to abrasion, weathering, and demanding operating conditions. Built to meet SAE J2064 type C class I standards, the hose guarantees long-lasting performance under working pressures up to 35 bar and in extreme temperatures ranging from -35°C to +125°C. With its robust design and superior material quality, it provides a dependable solution for professionals seeking efficiency, safety, and durability in refrigerant flow applications.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE), black – white type MARBLE (marbled), smooth, antistatic (R 6 Ω). The inner layer is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale nie very high temperatures), co makes, that hose is wide used in industry chemical and petrochemical. Layer inner with UPE type MARBLE is also compliant with requirements for hoses food, is characterized also low a coefficient friction during flow and prevents deposition medium na walls. This significantly facilitates cleaning and allows use also in the cosmetic, pharmaceutical and food industry. Reinforcement cord synthetic and spiral steel. Layer outer with resistant chemical rubber EPDM, antistatic (R 6 Ω), resistant na abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type Ω/T, completely antistatic (R 9 Ω) - ensures discharge charges electrostatic also through wall hose, co allows na use we all zones hazard explosion. standards and requirements: hoses chemical: EN 12115:2011(type Ω/T). industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU, FDA 21 CFR 177.1520 (c), D.M. 21/03/73. atmospheres explosive: directive ATEX (zones: 0, 1, 2, 20, 21, 22), EN 50014/ IEC 60079-0. assembly: should use fitting with a spigot („tail” for hose) smooth, not having sharp or high notches, which could po crimping cut or damage layer inner with UPE. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Inner layer: white-black polyethylene UPE. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white-black polyethylene UPE. Reinforcement: synthetic cord, steel spiral. Outer layer: black rubber EPDM. pressure working: from 12 bar to 16 bar - depending on diameter hose. temperature use: from -35°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA universal, strong and very flexible rubber hose delivery, intended for air, water and light chemicals. It can be used for dispersion water paints epoxy and polyurethane. Not is suitable for oils, fuels, hydrocarbons aromatic, paints cellulose, chlorinated-rubber and other containing solvents aromatic (np. toluene, xylene) or gasoline. When selecting for chemical applications we recommend contacting Tubes International. Inner and outer layer antistatic (R 9 Ω/m), Layer outer resistant to ozone, aging and conditions atmospheric. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black EPDM rubber. Working pressure: 20 bar. Operating temperature: from -40°C to +100°C (momentarily +120°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance na penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +160°C maximum pressure working given in table should reduced o 1% na each 1°C above tej temperatures. for example at temperature 180°C maximum pressure working for hose AF-FXSS-10 is: 100 bar – (180°C-160°C) x 1 = 100 bar – 20% = 80 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated na internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Material hose: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: braid of steel AISI 304. pressure working: from 50 bar to 110 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, semi-transparent hose smooth with PTFE o excellent resistance chemical. intended for low-pressure installations, chemicals, paints, adhesives, fuels liquid and gas, oils, greases, air, gases, water, steam and liquids na base water. used we all types industry. The hose is not antistatic (it does not dissipate electric charges for non-conductive substances). Not recommended for pneumatic push-in fittings. can be used also as mechanical guiding cables or tie rods of regard na low factor friction and self-lubricating properties PTFE. Flame-retardant (UL94 V-0) and with a high oxygen index (LOI). factor safety n = 4:1. pressure bursting and working hose, decreases in temperature use above 20°C and is dependent od jej the height. Material hose: smooth PTFE (teflon). hardness Shore (D): 58. temperature use: from -200°C to +260°C. pressure working: od 2.3 bar for 10.8 bar - depending on diameter hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure hose delivery, of reinforcement steel, intended for conducting steam superheated. Layer outer resistant na high temperature and conditions atmospheric. Not intended for steam cleaners ("dry steam cleaners"). For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber EPDM. Reinforcement: double steel wire cord. Outer layer: black or red rubber EPDM, micro-perforated. pressure working: 18 bar. temperature use: from -40°C to +210°C (momentarily up to +232°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsARMORVIN HNA is a highly versatile suction and discharge hose designed for the safe and efficient transfer of a wide range of food products, including juices, milk, water, wine, beer, and alcohols up to 50% concentration. Manufactured from transparent PVC and reinforced with a durable galvanized steel spiral, it guarantees strength, flexibility, and reliability in demanding applications. Its smooth inner surface minimizes flow resistance, supports hygienic processes, and simplifies cleaning, making it ideal for industries where purity and efficiency are essential. Fully compliant with European food contact regulations (1935/2004/EC, 10/2011/EU, and 2023/2006/EC), the hose ensures safety and quality in every stage of production. Beyond food processing, it proves equally effective in construction, agriculture, and industrial environments, handling light chemicals, sludges, sewage, dirty water, air, powders, granules, and other mildly abrasive bulk materials. With a working pressure range of 2–7 bar, vacuum resistance up to 0.85 bar at 20°C, and an operating temperature from -5°C to +65°C, ARMORVIN HNA delivers dependable performance across diverse conditions. Its robust yet flexible design makes it a trusted solution for businesses seeking durability, compliance, and efficiency in fluid and material transfer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThis highly flexible and elastic suction and discharge hose is engineered for the safe transfer of both fatty and non-fatty food products, ensuring maximum hygiene thanks to its odorless and tasteless rubber composition free from plasticizers, phthalates, and animal-derived substances. The smooth white NBR inner layer guarantees resistance to standard cleaning agents and processes commonly used in the food industry, while the durable blue synthetic rubber outer layer withstands temporary contact with animal and vegetable fats. Reinforced with a strong synthetic cord and steel spiral, the hose combines excellent pressure resistance up to 10 bar with reliable vacuum performance of 0.9 bar, maintaining full functionality within a wide temperature range from -20°C to +90°C. Its design allows for a small bending radius, making it particularly suitable for installations where flexibility and maneuverability are essential. Extensively applied in the dairy sector, especially for milk transfer under normal operating conditions, it ensures compliance with the strictest international standards, including EC 1935/2004, EC 2023/2006 (GMP), FDA 21 CFR 177.2600, BfR, 3A Sanitary Standards, and RAL certification. Offering a perfect balance of safety, durability, and efficiency, this hose is the ideal solution for food manufacturers seeking reliable performance and guaranteed conformity with European and global regulations.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsColorless, transparent, soft and flexible hose for applications laboratory and food. ideal for equipment analytical, condensers, incubators, desiccators, as lines for gases and drainage. Do products food and biopharmaceutical. used often also for cooling processors computers. glassy smoothed, free of pores surface inner prevents deposition and adhesion contamination inside hose and facilitates its cleaning. total repeatability parameters hose we all batches. can be used for pumps peristaltic, ale service life nie is large. hose free of is phthalates and BPA (bisphenol A). meets requirements hygienic and for contact with food: European 1935/2004/EC and 10/2011 EU (for conditions and substances acc. to certificate), American FDA, NSF-51, 3-A, USP Class VI, Japanese #370/1959. possible sterilization steam, oxide ethylene or radiation. compliant with REACH and California Proposition 65 – nie contains substances hazardous and banned. Length of a full hose roll 15 m. Available version VACUUM o thicker walls for applications vacuum. The given working pressure is determined relative to the bursting pressure at a safety factor of 1:5. Material: PVC (special). Maximum operating temperature: up to +74°C. temperature brittleness: -46°C. Hardness: 56° Shore (A). Density: 1.21 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon type BARRIER (thick-walled) intended for automotive and industrial systems refrigerant and air-conditioning working based on freon R134a, R12, R404a Suva MP52 and R22 oils mineral and synthetic PAG, POE and PVE. Layer outer resistant to oil, abrasion and conditions atmospheric. standards: SAE J2064 type C Class II. Inner layer: black rubber CR, Layer nylon (PA). Reinforcement: two braids polyester. Outer layer: black EPDM rubber, micro-perforated. Working pressure: from 17 bar to 24 bar, depending on the diameter hose. Operating temperature: od -30°C up to +125°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong and flexible suction – delivery hose, PVC intended for water and sewage. smooth wall inner, externally lightly Serrated. good resistance to external impacts and heavier conditions use. flexible in low temperatures. used in systems irrigation, tankers and vehicles sewage, for purification sewers and emptying septic tanks. Hose material: green PVC. Reinforcement: rigid-PVC spiral. Working pressure: from 1.8 bar to 4.5 bar - depending on the diameter hose and temperatures. Operating temperature: od -25°C up to +55°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThis medium-thickness, highly flexible hose with a durable steel spiral reinforcement coated in white PVC is engineered for efficient suction and transport of abrasive bulk materials such as granules, chips, shavings, and dust. Its smooth inner surface ensures optimal flow with minimal resistance, while the dense spiral construction provides excellent pressure resistance, corrosion protection, and strong adhesion to the hose wall. Designed for demanding industrial applications in plastics, woodworking, construction, and metal processing, it remains elastic even at low temperatures and offers outstanding resistance to abrasion, oils, and gasoline. Available in multiple specialized versions, it can be tailored to specific operational needs: the P3 PU standard model, made of transparent polyester-polyurethane, guarantees high wear resistance; the P3 PU AS antistatic version, crafted from transparent polyether-polyurethane, meets TRBS 2153 and TRGS 727 standards, offering protection against static discharge while resisting microbes and hydrolysis; and the P3 PU EL electrically conductive version, made of black polyether-polyurethane, complies with ATEX 2014/34/EU and is suitable for use in explosion-risk zones after assessment. With a wall thickness of 0.8–1.5 mm depending on diameter, operating temperatures from -40°C to +100°C, and easy installation using bridge clamps, this hose delivers reliability, safety, and versatility for a wide range of industrial environments.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose welding for oxygen made acc. to standards ISO 3821. is characterized resistance on kinking and action conditions atmospheric. Not recommended for gases generated based on fuels, oils and gas LPG. Inner layer: black rubber SBR/NR. Reinforcement: a synthetic braid. Outer layer: blue smooth rubber SBR/NR. Working pressure: 20 bar. Operating temperature: od -20°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe METALFLEX PVC hose is a universal, lightweight, and highly flexible solution designed for a wide range of industrial applications, ensuring reliable performance in the transfer of water, light chemicals, air, dust, and powders, as well as selected food products. Its transparent, soft PVC construction reinforced with a galvanized steel spiral guarantees excellent resistance to vacuum and collapse, while allowing continuous visual monitoring of the medium flow. Certified in compliance with European regulations (1935/2004/EC, 10/2011/EU, 2023/2006/EC) and FDA standards (CFR 21 175.300 and 175.1210), it is safe for temporary contact with foodstuffs such as juices, beverages, wine, beer, dairy products, and alcohols up to 50% concentration, provided the manufacturer’s guidelines are followed. Operating within a temperature range of -10°C to +65°C, the hose maintains working pressures from 1 bar to 9 bar at 20°C, with pressure decreasing as temperature rises. Its smooth, transparent wall not only facilitates hygiene control but also enhances process safety, while the steel spiral reinforcement ensures durability and flexibility even under demanding conditions. Ideal for industries seeking a cost-effective, versatile, and compliant hose solution, METALFLEX PVC combines practicality with performance, making it a dependable choice for both industrial and food-related operations.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe HYPERLINE FX Tube Only hose is designed for maximum efficiency and versatility, featuring an external spiral corrugation for flexibility and an internally smooth surface that guarantees uninterrupted flow. Manufactured from high-quality PTFE, it is available in a natural, semi-transparent version that enables visual monitoring of transported media, as well as in an antistatic black variant enriched with carbon to safely dissipate electrostatic charges in sensitive applications. Certified to meet FDA standards, flame-retardant (UL94 V-0), and offering a high oxygen index, this hose ensures reliability and safety even in demanding environments. With an impressive operating temperature range from -70°C to +150°C (up to +260°C with adjusted working pressure), it is perfectly suited for transferring chemicals, fuels, oils, solvents, adhesives, paints, detergents, dyes, and food products under low-pressure conditions. For enhanced durability and secure connections, the hose can be equipped with crimped stainless steel tube sleeves. Combining flexibility, chemical resistance, and compliance with strict safety regulations, the HYPERLINE FX Tube Only hose is the ideal solution for industries seeking a dependable and high-performance transfer system.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE SB (HYDRAFLON) has layer inner made with high quality seamless PTFE ensuring minimal porosity, maximum flexibility and resistance na vibration. braid made is with treated thermally wire of steel stainless AISI 304 o strength 1700 MPa. used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water, itp. - as well as for classic high-pressure hydraulic oil installations. hose HYPERLINE SB is version hose SMOOTHBORE of wall o medium wall thickness and diameter internal adjusted for standard ends hydraulic; assembly using standard straight jaws clamping. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses HYPERLINE SB, in version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. at temperature use above +130°C maximum pressure working should reduced o 0.75% na each 1°C rise temperatures. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Material hose: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. pressure working: from 80 bar to 350 bar - depending on diameter hose. temperature use: from -70°C to +260°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and rinsing installations and machine in industry food steam water and hot water. Layer inner meets requirements FDA 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant na fats vegetable and animal. hose high quality, commonly used for cleaning and rinsing hot water or steam installations and machine in industry food (np. dairies, industry meat). Note: nie should use hose simultaneously for water and steam water. For water steam, use special fittings bolted with screws, intended for water steam. To extend the service life, the hose should be emptied of steam after use, to avoid condensate accumulation. length standard rolls: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: synthetic cord. Outer layer: blue rubber NBR/PVC. pressure working: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). temperature use: from -30°C to +165°C (from -30°C to +95°C - for water).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose for propane - butane and gas natural. Meets the requirements of standards ISO 3821. Inner layer: black NBR rubber. Reinforcement: two braids textile. Outer layer: orange EPDM rubber/SBR. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose freon o high diameter intended for automotive (especially trucks and buses) and industrial systems refrigerant and air-conditioning working based on freon R 134a and R404a and oils mineral and synthetic PAG and POE. Layer outer resistant to oil, abrasion, high temperature and conditions atmospheric. standards: SAE J2064 type B (dimensions SAE 100R5). assembly: use bolted or crimped fittings special. Inner layer: black rubber IIR. Reinforcement: a steel braid. Outer layer: black rubber CSM, micro-perforated. Working pressure: 35 bar. Operating temperature: od -40°C up to +125°C.
