0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting ball – insert for a nut, brass, type EW

          All products | Low-pressure fittings and adapters
          0 €
          A fitting ball - insert for a nut. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting straight INTERLOCK BSP female, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting straight INTERLOCK with a female BSP thread, 60° cone with an O-ring, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar assembly for hoses pneumatic KK

          All products | Pneumatic hoses
          0 €
          Bar assembly for hoses pneumatic. facilitates and speeds up design installation, reduces space installation, increases resistance to vibration. color: blue.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini actuator double-acting operation ISO 6432 STD, type 113, has been designed for use with filtered air oiled or not oiled and not requires additional operations maintenance. Do make actuator used sleeve of steel stainless. reduced dimensions external covers some diameters, co allows assembly actuators in difficult and confined spaces. service life actuators with seals NBR is 15 million cycles, with polyurethane 30 million cycles. The presented value not should be treated as binding or guaranteed, a only as reference Due to variability many agents, including loads radial and axial, speed, temperature, czy losses air (value limit). Piston diameter: Ø 16, 20 and 25 mm. stroke working: od 10 for 500 mm. Working pressure: od 0.6 up to 10 bar. sealing: polyurethane, NBR. Operating temperature: od -10°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A nut for ring double-cone, steel galvanized

          All products | Grease hoses and hose-end fittings
          0 €
          A nut for ring double-cone Intended for mounting line for systems lubrication at use typical ends tube and seamless pipes of steel or brass. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nipple brass nickel-plated with male thread, type A1

          All products | Threaded pneumatic fittings
          0 €
          Nipple with thread external parallel type A1, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Special version cover PYROJACKET Intended mainly for aviation (made in accordance with the standard SAE Aerospace Standard 1072E), industry railway (compliant with DIN EN 45545-2:2013-08) and marine. additional certified is in diameters 13 mm ÷ 127 mm through DNV for temperatures +800°C through 30 minutes (ISO 15540) and through MSHA (for use in mines). Available on request version VCO with flame-retardant hook-and-loop (velcro) in the scope diameters od 22 mm for 140 mm, in lengths for 30 meters. assembly hook-and-loop causes, that A guard can be easily installed without disconnecting lines, cables czy pipes. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cutting ring for a nut, brass, type AI 13740

          All products | Low-pressure fittings and adapters
          0 €
          Cutting ring for a nut with thread metric type AI 13740 with brass. range diameters external joined pipes od 4 for 22 mm. standard: EN 1254-2. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hot-water gun insulated, steel stainless, AKBO, red

          All products | Low-pressure water spray guns
          0 €
          An AKBO hot-water gun. Made of stainless steel, insulated trigger, EPDM rubber guards, Viton seals. Use for hot water requires particular caution. Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light plastic Gun for compressed air, intended for removing with surface all contaminants: liquids, fine chips, filings etc. regulation flow degree press lever. made with strength polyamide glass-fiber-reinforced. ergonomic shape and not demanding use force action lever ensures comfort use. Due to low mass and plastic construction especially recommended for industry automotive, textile, electronic etc. Gun equipped is in standard nozzle o diameter hole 1.5 mm, replaceable, with thread connection external M12x1.25. instead of nozzle standard install can other nozzles – see accessories for guns EWO. depending on the connection we distinguish Gun terminated a plug EUROSTANDARD 7.2, fitting for hose o diameter 6 mm, 9 mm and 13 mm or thread internal 1/4". Material: body - blue polyamide (PA6 GK30) glass-fiber-reinforced; sealing – NBR, PU. pressure maximum: 10 bar. pressure operating: 2 ÷ 6 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cover MB without a chain for coupling TW DIN 28450, aluminum

          All products | Tankwagen couplings and ECTFE-lined couplings
          0 €
          Cover MB, without a chain, for fittings transfer TW. used for parts VK (male) constitutes a cap resistant on pressure. Material: aluminum. Operating temperature: od -20°C up to +65°C (should take into account medium and Material seal). gasket type TWF, Material the gasket: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimping press FINN-POWER P20 NMS

          All products | Hose and tube assembling machines
          0 €
          Crimping press P20 NMS to basic stationary device for workshops, services and small plants, producing lines hydraulic o diameter internal for 1.1/2”, with intended for performing small production lines. Powered is motor electric with supply three-phase (400 V) o power 3 kW. control reaching diameter crimp takes place using optical indicator (indicator light LED), a po po jej reaching, jaws press alloy. setting diameter crimp regulated is knob micrometric with accuracy settings 0.01 mm. All FINN-POWER crimping presses are adapted to work with interchangeable jaw sets (ordered separately). On example for range diameters crimp od 10 for 61 mm should order 12 sets jaws standard od FP-20-10 for FP-20-54. The machine P20X can equip additional in base or hanger with sockets for storage jaws, in set with handle magnetic for ich quick replacement.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connection flange 90° o compact construction with a flange o diameter pitch holes od 35 mm for 55 mm, with thread connection external metric, socket 24° DIN 2353. used in connection pumps hydraulic. standard equipped in set bolts, washers and O-ring. Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Reducer pressure-gauge nipple, brass, type RDN

          All products | Manometers reducers and valves
          0 €
          Nipple with thread internal and thread external, for pressure gauge of standard connections pressure-gauge according to EN 837-1. allows assembly pressure gauge for socket o greater size. pressure gauge mounted for thread internal d1. connection to has character self-sealing – cone on bottom hole d1 presses in hole plug centring the connection pressure gauge. threads d1 and d2 are protected against unscrewing connections through applied special adhesive. intended for liquids and gases non-aggressive, for mounting pressure gauge, cocks and valves pressure-gauge and other accessories equipped in ten type the connection. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt for BANJO, steel carbon, type HS

          All products | Low-pressure fittings and adapters
          0 €
          Bolt for BANJO type HS with thread metric or BSP, close for DIN 7643. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Bolt double BANJO with washer and thread internal type D10 for coupling type R13, R14, D12, D17, D5, D6. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Union with thread internal BSP, steel stainless, type VT108

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Union with thread internal BSP for use in connections pipe installation industrial. sealing union: cone (metal-metal). Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer MWSC with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer MWSC with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 35 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: up to 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee swivel, screw-in with thread external cylindrical, series F type R 32 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee of steel stainless type 62400 with thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Colorless, semi-transparent, reinforced a braid flexible hose with rubber silicone vulcanized platinum. intended for higher pressures. used in industry pharmaceutical, cosmetic, food, biotechnology, sterile lines filling, systems treatment water, production vaccines, bioreactors. is characterized exceptionally smooth surface inner prevents deposition and adhesion contaminants inside hose and growth bacteria. facilitates to total cleaning and sterilization hose. smooth Layer inner reduces also resistance flow through hose. low extractability, not toxicity, not hemolyticity and not pyrogenicity ensures total cleanliness liquids we sensitive use. minimal level loads biological (bioburden). Meets the requirements of hygienic American FDA 21 CFR 177.2600, 3-A and USP CLASS VI. possible sterilization steam (30 min, 1 bar, 121°C), cleaning CIP and SIP installation, oxide ethylene or radiation (for 5 Mrad). length full roll hose 15 m (od diameter internal 31.8 mm – 7.5 m). pressure working determined relative to pressure bursting at factor safety 1:4. Material: silicone (platinum). Maximum Operating temperature: up to +160°C. temperature brittleness: -80°C. Hardness: 70° Shore (A). Density: 1.18 g/cm³. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality clamp worm-drive general use Intended for fast and easy fastening hoses industrial, entirely made of steel stainless AISI 316, recommended for applications in industry food, chemical, marine, etc. made in accordance with requirements standards DIN 3017 and the directive RoHs 20032/95/EC. clamp ASFA-L o wide tape 9 mm recommended is for standard applications. unique mechanism worm-drive in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp clamps without damage surface hose. Material: steel stainless AISI 316 (W5).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Gasket for a nut railway, NBR, type KGWU

          All products | Loading and unloading couplings
          0 €
          Gasket for a nut railway compatible only with nut ends type KGW. Material: NBR. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for extraction materials abrasive SMARTFLEX® 1.4

          All products | Ducting and ventilation hoses
          0 €
          Strong, flexible, thick hose intended for discharge sawdust, chips, offcuts, bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 3. Antistatic and flame-retardant, it ensures a high level of work safety. thick wall and dense spiral reinforcing ensure high parameters pressure. very smooth inside, little compressible. flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Wall thickness measured between the spiral: 1.4 mm. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic polyurethane PUR F

          All products | Pneumatic hoses
          0 €
          Light, very flexible hose used in systems, in which occurs frequent contact with water (high resistance to microorganisms and hydrolysis), detergents, solvents. Retains flexibility at low temperatures, is resistant to abrasion and kinking. The calibrated outer diameter allows use with push-in connectors. Hardness per Shore (A): 98°. Meets FDA requirements. Available in colour natural, black, blue, green, red. Hose material: polyether-polyurethane. pressure working: from 16 bar to 24 bar, depending on the diameter hose. Operating temperature: od -40°C up to +85°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very flexible in wide the scope temperatures hose spiral, resistant to abrasion, sparks welding and hot chips metal. intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to radiation UV and aging. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT. Hardness per Shore (A): 98°. The stated total length is the maximum hose length after stretching. Hose material: flame-retardant polyurethane PUR. Working pressure: up to 13 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C. standards: UL 94 VO (Layer outer). color black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose welding for oxygen OXYGEN ISO 3821

          All products | Technical gases hoses
          0 €
          Light, flexible, smooth hose for oxygen, compliant with the standard EN ISO 3821. Do use with industrial equipment for welding autogenous, usually Together with red a hose acetylene. It can be used also for gas natural and air. Inner layer: black rubber SBR/EPDM. Reinforcement: PVA. Outer layer: blue EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong hose suction - delivery with layer inner with resistant chemical polyethylene o ultra-high weight molecular (UPE, UHMWPE). Layer inner is resistant to most acids and bases and many other aggressive chemicals (in elevated, ale not very high temperatures), co makes, that hose is Widely used in industry chemical and petrochemical. Layer inner with UPE is also compliant with requirements for hoses food, free of phthalates and polycyclic hydrocarbons aromatic (PAH), is characterized also low a coefficient friction during flow and prevents deposition medium on walls. facilitates to significantly cleaning and allows on use also in industry cosmetic, pharmaceutical and food. Reinforcement cord synthetic and spiral steel, built-in cable copper for discharge charges electrostatic. Layer outer with resistant chemical rubber EPDM, resistant to abrasion, ozone and conditions atmospheric. compliant with requirements EN 12115:11 (type M, resistance between fitting line R ≤ 100 Ω, guaranteed for lines o length for 40 m). standards and requirements : hoses chemical: EN 12115:2011. industry food, contact with food (Layer inner): 1935/2004/EC, 2023/2006/EC (GMP), 10/2011/EU (simulant fluids A, B, D2), FDA 21 CFR 177.1520, BfR III. Confirmation of resistance and application conditions requires contact with Tubes International, in particular for temperatures above 50°C. Inner layer: white cream polyethylene UPE. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible, hose suction-delivery o internal layer with resistant to abrasion and oil polyurethane, with densely arranged steel spiral reinforcing for increasing pressure working and resistance to vacuum. intended for air, liquids, light chemicals, in systems pneumatic, hydraulic and for conveying substances solid. smooth surface inner reduces losses flow and ensures ease cleaning. transparent wall allows on visual control of the flow. Reinforcement dense spiral with wire steel ensures very good resistance to vacuum and kinking hose and small radius bends. W use general-industrial It can be used: for water, light chemicals and other liquids based on fat, oils and hydrocarbons (should take into account resistance chemical polyurethane) and for air, for vacuum conveying dusts, powders, granulates and other abrasive substances bulk (should then take into account abrasion resistance medium and any problem electricity static). It can be used in industry food (tam, where acceptable are requirements American FDA 21 CFR 177.2600 e, f) for liquid substances food for food hydrated („e”) and greasy („f”). Inner layer: transparent polyurethane. Reinforcement: steel spiral. Outer layer: transparent PVC. Working pressure at a temperature of 20°C: from 12 bar to 20 bar - depending on the diameter hose. Operating temperature: od -20°C up to +90°C. As the working temperature rises, the hose's working pressure value decreases.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose Hyperline FX SS RC BLACK to Light, flexible hose PTFE, has additional layer external made with black, antistatic and flame-retardant rubber EPDM, meeting (rubber) requirements for vehicles railway EN 45545. ensures to additional cover braid and hose against damage and easy cleaning hose. Due to its properties recommended for applications in industry and vehicles mechanical. hose can be delivered without ends, as and in the molds complete lines, gorowych for mounting. Hose material: inside smooth, externally Serrated PTFE (teflon). Reinforcement: single braid of steel AISI 304 with additional layer protective with rubber EPDM. Working pressure: from 50 bar to 110 bar - depending on the diameter hose. Operating temperature: od -40°C up to +140°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose delivery for oil hydraulic HW R6

          All products | Oil and petroleum hoses
          0 €
          Hose delivery for low-pressure parts installation hydraulics power, compliant with the standard SAE 100 R6 and ISO 4079 R6. intended primarily for liquids hydraulic based on oil mineral and some synthetic liquids hydraulic. can be also used for liquids hydraulic based on water and for water and air at limiting temperatures up to +70°C (use for air can require microperforation layer outer). is suitable for many liquid products industry petrochemical: oils mineral and synthetic, oil drive and heating, glycol ethylene and other. Not recommended for gasoline and oils based on esters, not is suitable for hydrocarbons aromatic. Layer inner with black, smooth rubber synthetic. Reinforcement a braid textile. Layer outer with black rubber synthetic, resistant to abrasion, oil, ozone and conditions atmospheric. Inner layer: black synthetic rubber. Reinforcement: a single textile braid. Outer layer: black synthetic rubber. Working pressure: from 12 bar to 28 bar - depending on the diameter hose. Operating temperature: od -40°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose delivery for water OSLO 10®

          Air and water hoses | All products
          0 €
          Strong and light hose delivery, o wall small wall thickness, almost flat at rest, intended for use in heavy conditions. used m.in. for conveying water industrial and sewage, for pumps immersion, systems dewatering and irrigation, mobile irrigation. resistant to abrasion, conditions atmospheric and ozone. design hose allows its easy winding po use. assembly using bands or straps. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black synthetic rubber. Reinforcement: cord polyester. Outer layer: black synthetic rubber. Working pressure: 10 bar. Operating temperature: od -25°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 double, polyamide, type 301

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 301 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: self-extinguishing polyamide. Operating temperature: od -40°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling Hansen Beverage with valve and connection with thread external NPT. coupling available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling DN11.8 with thread external facilitating fast connection gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Working pressure: 200 bar. Operating temperature: up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug WEO with fitting for hose, hardened steel, series 710

          All products | Fittings for high-pressure hoses
          0 €
          Plug WEO with fitting for hose for use in systems hydraulic tam, where not has sufficiently much space, to install line in traditional way. Po connection plug has freedom of movement movement in the socket, co prevents twisting lines in during mounting. intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for size hose for 3/4"), 250 bar (for size hose 1"). Material: hardened steel. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check RFL L type B (Connection threaded with an O-ring with one and coupling push-in on the other side) regulates stream flowing air in obu directions. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality three-way ball valve "L" type BK3L with thread internal BSP, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling IBC with a thread internal trapezoidal compliant with the DIN EN 12713 standard and of coupling type CAMLOCK D (socket). The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling angled 90° type B6 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        Go to Top