0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for the system cooling DERBY RADIATOR

          Air and water hoses | All products
          0 €
          Hose delivery intended for hot water mixed with fluids anti-freeze. used in systems cooling and heating, for pumps in engines and machines. Layer inner resistant to heat and fluids cooling. Layer outer resistant to heat and aging. made in accordance with the standard DIN 73411:79. Roll length: 60 m or 120 m. Inner layer: black EPDM rubber. Reinforcement: cord synthetic. Outer layer: black EPDM rubber. Working pressure: from 2 bar to 4 bar - depending on the diameter hose. Operating temperature: od -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hydraulic hose mining EN 856 4SP

          All products | Hydraulic rubber hoses
          0 €
          Hydraulic hose for applications in mining. Layer outer antistatic, non-toxic resistant to flame. has certificate confirming meeting requirements safety in Zone at-risk explosion. standards: EN 856 4SP, ISO 3862-1 4SP. Inner layer: black synthetic rubber. Reinforcement: four layer spiral wire steel. Outer layer: black synthetic rubber. Working pressure: from 210 bar to 445 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily up to +120°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Semi-transparent, yellow, flexible hose designed specially for fuels and oils lubricating. resistant to swelling and hardening on result operation hydrocarbons, reduces significantly risk cracking and leakage. minimum extractability secures cleanliness fuels, a low factor penetration substances aromatic secures the operator and environment. resistant to ozone and radiation UV. flexibility hose facilitates its installations even in tight places. translucent wall allows on monitoring flow. hose is resistant to most products petroleum-based and fuels (also with addition ethanol up to 10%) and It can be used for gasoline, naphtha, oil drive and heating, agents lubricating, coolants for cutting and based on glycol. commonly used and proven in thousands applications: small engines, automotive, vehicles recreational, mowers garden, saws, installations coolant and lubrication, equipment for cutting and polishing. length full roll hose 15 m. pressure working determined relative to pressure bursting at factor safety 1:5. Material: PVC (special). Maximum Operating temperature: +74°C. temperature brittleness: -37°C. Hardness: 57° Shore (A). Density: 1.26 g/cm 3. Note: The product is packaged in the Tubes International Clean Zone (CLEAN ROOM) in compliance with rigorous standards. Return of the product after opening the package is not possible.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose o excellent resistance temperature and strength on elevated pressure made of special, non-flammable polymer. has calibrated diameter external. Material is resistant to aging and action radiation UV, characterised good properties sliding co counteracts abrasion material. Material impermeable for gases, resistant to action greater concentrated bases and acids inorganic, organic, alcohols and solvents in elevated temperatures. has properties electrical-insulating. calibrated Diameter outer allows connection with plugs or couplings leading manufacturers. accuracy dimensional ensures constant strength on compression even for hoses with greater diameter makes, that is suitable for wider range practical applications. Hose material: polyfluoride vinylidene PVDF. Working pressure: from 16 bar to 80 bar (depending on the diameter hose). Operating temperature: od -50°C up to +140°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Polyurethane hose spiral intended for pneumatic systems control, tools hand, robots industrial, etc. resistant to abrasion, breaking and kinking, with success used also in industry automotive. its high flexibility maintained is even po many years use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT (without springs for diameter outer 16 mm). The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 17 bar (depending on the diameter hose). Operating temperature: od -40°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very Light, flexible hose suction-delivery, intended for conveying substances chemical. made with thermoplastic vulcanizate TPV – material connecting advantages processing polymers thermoplastic (PP – polypropylene) with properties vulcanized rubber (EPDM). good resistance chemical - close for rubber EPDM allows on use go for many substances, between other acids (hydrochloric, sulfuric), bases, salts, alcohols, glycols and ketones, concentrated detergents. not recommended for fuels, oils, solvents aromatic. resistant to conditions atmospheric, aging and abrasion (abrasion resistance compliant with ISO 4649:150 mm 3 ). low weight and small radius bending hose ensure ease operation, co can be advantage at handling with tankers and container. On special order Available version VACUPRESS SUPER CHEMI (diameter for 63 mm) with layer inner lined polyethylene (LLDPE) co increases resistance chemical hose and allows its use between other for concentrated acids hydrochloric and sulfuric, for acid nitric and for aggressive herbicides and insecticides. Inner layer: thermoplastic rubber TPV. Reinforcement: a polyester braid, steel spiral galvanized. Outer layer: thermoplastic rubber TPV. pressure working for temperatures +20°C : od 7 up to 15 bar - depending on the diameter hose. Operating temperature: od -25°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Hose HYPERLINE FX is optimal solution in use industrial, when required are large flow rates, resistance chemical and temperature, resistance to penetration. perfectly is suitable for conveying substances chemical, fuels, oils, paints, solvents, adhesives, dyes, gases and steam water, detergents, water and substances food. at temperature use above +130°C maximum pressure working given in table should reduced o 1% on each 1°C above tej temperatures. for example at temperature 170°C maximum pressure working for hose AF-FXAM-10 is: 70 bar – (170°C-160°C) x 1 = 70 bar – 40% = 42 bar. W case, when a hose PTFE flows substances, which is poor conductor and has potential properties electrification, charge electric will accumulated on internal surface PTFE and to avoid problem electricity static is used antistatic AS variant PTFE. antistatic teflon in version AS contains appropriate distributed in PTFE graphite and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). Hose material: inside smooth, externally Serrated PTFE (teflon) - natural white and antistatic - black. Reinforcement: an aramid braid. Working pressure: from 35 bar to 77 bar - depending on the diameter hose. Operating temperature: od -70°C up to +180°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong and flexible hose delivery of reinforcement steel for conducting steam saturated. Layer inner o sound resistance to high temperature, steam saturated and phenomenon pop-corningu (destruction layer internal through penetration condensate steam). withstands momentarily steam superheated o temperature 230°C and pressure 18 bar, longer use with steam superheated reduces service life hose. Layer outer resistant to temperature, conditions atmospheric, abrasion and aging. hose used in industry chemical, petrochemical, power and in other use industrial. Not intended for steam cleaners ("dry steam cleaners"). Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. factor safety: 10:1. length standard: 60 m. Inner layer: black rubber IIR. Reinforcement: double cord with wire steel. Outer layer: red EPDM rubber, micro-perforated. Working pressure: 18 bar. Operating temperature: od -40°C up to +210°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose high-pressure for grease 130GREASING

          All products | Grease hoses and hose-end fittings
          0 €
          Light, flexible hose intended for high-pressure systems grease constant. standard: DIN 1283. Inner layer: polyester. Reinforcement: single a synthetic braid. Outer layer: polyurethane (130A), micro-perforated polyurethane (130C). Operating temperature: od -40°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose reinforced polyurethane RPU

          All products | General purpose hoses
          0 €
          A universal flexible high quality hose polyurethane with a braid manufactured in Great Britain. intended for water, air, oils, fuels, greases, chemicals, granulates. hose strong od similar hoses, PVC, retaining its shape, resistant to kinking, hydrolysis and abrasion, flexible in low temperatures. Contains no cadmium, silicone, plasticisers or halogen compounds. Inner layer: transparent polyurethane-polyether. Reinforcement: a polyester braid. Outer layer: transparent polyurethane-polyether. Working pressure at a temperature of 20°C: from 10 bar to 20 bar - depending on the diameter hose. Operating temperature: od -30°C up to +70°C (momentarily +100°C). As the working temperature rises, the hose's working pressure value decreases.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling NiTO of steel stainless AISI 316L with thread external BSP. occurs in two systems 1/2″ and 3/4″. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Not can connect directly element with various systems e.g. socket 1/2″ with a plug 3/4″. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: od -20°C up to +150°C. Material seal: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling with thread external BSPT and a shut-off valve, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. is characterized high mechanical strength and resistance chemical. They are suitable for autoclaving. length L - length total. Material: polysulfone. sealing: O-ring EPDM. Working pressure: for 8.6 bar. Operating temperature: od -40°C up to +138°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A FERRARI lever coupling plug with a flange PN10, type F.46, for use between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling plug with thread external BSP with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve 2″ IBC for an IBC container, polypropylene, type IBV 1

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Valve 2" in the "premium" version for an IBC container made entirely of durable polypropylene, which eliminates the occurrence of any corrosion. As standard, equipped with a polyethylene (LDPE) gasket, which is characterized by very high resistance to chemicals compared to standard rubber seals such as EPDM, NBR or Viton. The valve is additionally equipped with a locking latch and a cap. Available valve outlet connection: male thread (trapezoidal, NPT) or CAMLOCK A plug. Material: polypropylene. Sealing: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality two-way ball valve type BKH L/S with external thread metric, DIN 2353, intended for high-pressure installation hydraulic. occurs as: L (series light), S (series heavy). Material: steel (body, ball, stem). seal: PA (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (PA): od -20°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Steel needle valve shut-off with connection under pressure gauge, used in systems hydraulic as element insulating pressure gauge od installation, securing against overload and stroke pressure during opening and enabling replacement. version straight (FT290) and version angled 90° (FT291). possibility mounting panel on the thread under knob. On special order available also in made of steel stainless AISI 316. Material: galvanised carbon steel (body), steel carbon (needle), polyamide 66 (knob). sealing: NBR/PTFE. Working pressure: 350 bar. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version ended on both sides couplings push-in (line - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check type FPRI used in systems hydraulic as element for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. Intended for screwing into an appropriately deep threaded hole. supplied Together with an O-ring, which constitutes sealing between valve, a threaded a hole. O-ring can install with one or the other side valve (depending on direction flow, which we want obtain). standard pressure opening: 0.5 bar. permissible direction flow A → A1. Material: steel galvanized (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Set plates end, system SKILLAIR

          Accessories for FRL | All products
          0 €
          Set plates end for system SKILLAIR, series 100, 200, 300 or 400.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling socket reducing STECKO, steel free-cutting

          All products | Fittings for high-pressure hoses
          0 €
          Coupling socket reducing system STECKO for use in systems hydraulic for mining. Material: steel free-cutting, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling bulkhead type B4 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on angled 90° type C6 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow through-flow, series F type R 4 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality coupling straight, made entirely of steel AISI 316L, series 60040. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter for pressure gauge 1/4″- 1/8″

          Accessories for FRL | All products
          0 €
          Adapter enabling connection pressure gauge with thread 1/8" for coupling 1/4", O-ring. Material: steel carbon. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          ASTA version cover PROTECTOR completely antistatic, Intended for use under earth and in other special environment, which require conductive surface. compliant with the standard EN ISO 80079-36:2016, which is connected with the directive ATEX for equipment non-electrical in spaces hazardous explosion. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nozzle for lances, steel stainless

          All products | Guns for high-pressure washers
          0 €
          Nozzle for lances. Material: steel stainless. Connection: 1/4" NPT male. Working pressure: up to 350 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling CEJN 115 with thread external and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. optionally socket can be equipped in ring securing against accidental disconnection. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1000 bar (coupling connected). pressure bursting: 2600 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality socket water quick coupling NiTO 1/2" with fitting for hose and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils). For the valve, an EPDM O-ring.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket coupling CAMLOCK CRS with smooth fitting for hose (for a shell clamp) made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A FERRARI lever coupling socket with thread external BSP, type F.14, for use between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: rubber NR-SBR. Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A LAUX 42 lever coupling socket with connection for welding-on with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling socket with a flange PN 10 with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: SBR. Working pressure: up to 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check type R-4000 designed and made in accordance with the directive PED 2014/68/UE. intended for high-pressure installation hydraulic and industrial. closes Flow rate medium in one direction and opens free Flow rate medium in direction opposite. standard pressure opening: 0.5 bar (available also 1, 2, 3 and 5 bar). permissible direction flow: A → A1. Material: steel galvanized, brass nickel-plated, steel stainless AISI 316L. sealing: NBR - standard RA, RL; Viton (FKM) - standard RZ; EPDM - option. Operating temperature: od -20°C up to +100°C (NBR); od -20°C up to +200°C (Viton); od -40°C up to +150°C (EPDM).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 90° with a female NPT thread steel stainless, 100H

          All products | Precision threaded fasteners
          0 €
          Elbow 90° with thread internal NPT, type 100H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 90° with thread internal BSP, cast iron, type 90/6

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Elbow 90° with thread internal BSP for use in connections pipe installation industrial. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow socket STECKO, steel free-cutting

          All products | Fittings for high-pressure hoses
          0 €
          Elbow socket system STECKO for use in systems hydraulic for mining. Material: steel free-cutting, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flange fixed PN16 for hose, steel AISI 304, type CNWF

          All products | Low-pressure fittings and adapters
          0 €
          Flange fixed PN16 type CNWF of steel AISI 304 with "tail" for hose. intended for hoses rubber and plastic hoses industrial. assembly using bands or straps clamping. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting flange 90° NON SKIVE SAE 6000 (SFS 90), series heavy, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
        Go to Top