0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling with pressure gauge MAN L in version ended on both sides couplings push-in (line - line). pressure gauge built-in in metal cover ensures accurate reading despite small sizes. can be directed in any direction through hand turning. Working pressure: 12 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Swivel coupling with thread external and spring protective for hoses with soft plastics. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling reducing SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Coupling reducing for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on angled 90° with thread internal type C5/F intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Adapter for valves shut-off FPE / FPEA, steel carbon

          All products | Manometers reducers and valves
          0 €
          Adapter consists ofcy additional equipment valves shut-off type FPE and FPEA. Working pressure: 350 bar. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter thread internal BSP type A6, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Aluminum A box the directional valve air SPEEDFIT

          All products | Pneumatic piping systems
          0 €
          A box distribution air for system SPEEDFIT. W set is found two plugs 1/2″. Material: aluminum. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible rubber nozzle for compressed air, Intended for fast removing with surface all contaminants. regulation flow through bend nozzle. perfectly works in situations, in which we have for dealing with delicate surface, exposed on damage through direct contact. depending on the connection we distinguish nozzle ending in fitting for hose o diameter 6 mm and 9 mm or a plug EUROSTANDARD 7.2. Diameter hole nozzle: 2 mm. Flow rate nominal: 200 l/min at a pressure of 6 bar. pressure maximum: 10 bar. pressure operating: 1 ÷ 6 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Flexible A universal hose rubber NIPLAFLEX

          All products | General purpose hoses
          0 €
          Multifunction, light, exceptionally pliable and flexible hose resistant to oil and gasoline. intended for air, water, oils, fuels, greases, chemicals (e.g. light acids and bases), pesticides, fertilisers etc. smooth Layer outer resistant to conditions atmospheric, aging, ozone, radiation UV, non-staining. popular and Widely used in industry, construction, agriculture, workshops automotive. Inner layer: black blend NBR/PU/PVC. Reinforcement: a polyester braid. Outer layer: black blend NBR/PVC. Working pressure: 25 bar. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Medium rate socket bulkhead quick coupling with fitting for hose intended for installation washing, filtration water deionized, machines industrial, detection leakage, etc. characteristic The design (not contains balls and ferrule protective) allows on easier, secure connection and disconnection one hand. An audible click signals a successful connection. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 8.3 bar. Operating temperature: od 0°C up to +71°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality socket water quick coupling NiTO 3/4" with fitting for hose and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils). For the valve, an EPDM O-ring.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting BANJO straight double, steel carbon, type DRS

          All products | Low-pressure fittings and adapters
          0 €
          A fitting BANJO straight double type DRS, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for grease nipples type DIN 71412 A, DIN7 1412 B and DIN 71412 C with thread internal metric. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread internal metric, O-ring sealing on a 24° cone (DKOS), series heavy. Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting flange 45° INTERLOCK SAE 6000, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting flange 45° INTERLOCK SAE 6000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting push-in SKV with a lock nut with "tail" type INTERLOCK Intended for hoses hydraulic type 4SH, R13, R15 (in sizes 3/4" ÷ 1.1/2"). sealing: NBR. Material: steel galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug hexagonal with thread external, steel stainless 121H

          All products | Precision threaded fasteners
          0 €
          Plug hexagonal with thread external NPT, BSP, BSPT, UNF and UN, for connector threaded intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. plug with thread UNF and UN fitted is in a gasket O-ring. Material: steel AISI 316. gasket: O-ring FKM 90.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A lance with thermal insulation, type MT2, intended for a high-pressure washer. Connections: (inlet) 1/4" BSP male / (outlet) 1/4" NPT female. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: steel stainless.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nipple for welding-on with thread external BSPT, steel stainless, type VT126

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Nipple for welding-on with thread external BSPT for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard in the molds rolls or shorter sheets designed for protection hoses, cables other element against splashes metals, intense radiating heat, flames and splashes welding. high content Clean silica (over 96%) ensures excellent resistance temperature, flexibility and minimal shrinkage. Not emits fumes ani vapours. occurs in three versions, in rolls o wide 915 mm and 1525 mm: SILICAFLEX BLANKET 18 – o wall thickness 0.76 mm, SILICAFLEX BLANKET 32 – o wall thickness 1.25 mm, SILICAFLEX BLANKET 36 – o wall thickness 1.27 mm. Available is also special version SILICAFLEX BLANKET coated aluminum coating reflective (FQSFB36-36AL). aluminum SILICAFLEX BLANKET except for features standard cover SILICAFLEX and reflecting intensely radiating heat, has also better strength on tearing and on abrasion, a also better resistance to water and oils. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ring identification white (gases), HANSEN BEVERAGE

          All products | Quick couplings for the food industry
          0 €
          Ring identification white (gases) for socket quick coupling Hansen Beverage. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Water gun, steel stainless, AKBO HEAVY DUTY, blue

          All products | Low-pressure water spray guns
          0 €
          An AKBO HEAVY DUTY water gun of AISI 316 steel, with a rubber handle and an insulated trigger tongue. It is not intended for steam. Body material: AISI 316 steel. Trigger tongue and pusher material: stainless steel. Linings of ethylene-propylene rubber (EPDM). sealing: Viton. Connection: 1/2" BSP female. Working pressure: 24 bar. Flow rate: 75 l/min. Operating temperature: up to +95°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plate bottom short for clamp DIN 3015 heavy

          All products | Clamps for hydraulic pipes
          0 €
          Plate bottom short for welding for mounting clamp DIN 3015 heavy complete type 201. Material: steel carbon or steel AISI 316L.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Cover MB without a chain for coupling TW DIN 28450, brass

          All products | Tankwagen couplings and ECTFE-lined couplings
          0 €
          Cover MB, without a chain, for fittings transfer TW. used for parts VK (male) constitutes a cap resistant on pressure. Material: brass. Operating temperature: od -20°C up to +65°C (should take into account medium and Material seal). gasket type TWF, Material the gasket: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimping press TUBOMATIC H25

          All products | Hose and tube assembling machines
          0 €
          Crimping press TUBOMATIC H25 with manual drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting BANJO with thread external BSP, brass, type AI 13550

          All products | Low-pressure fittings and adapters
          0 €
          Fitting BANJO with thread external BSP type AI 13550 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass. gasket: NBR. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Specialized hose for beer BREWART SD

          All products | Food and beverage hoses
          0 €
          Suction-delivery hose latest generation specially designed according to high requirements industry processing beer. intended is for conveying high quality beer raw, beer pasteurised and beer organic. The inner layer is free of phthalates, plasticisers and components of animal origin, co eliminates risk contamination medium and growth bacteria. Layer outer resistant to abrasion, aging and conditions atmospheric. tested and approved for conveying beer through Technical University WEIHENSTEPHAN in Munich – not causes changes taste beer. standards and requirements : 1) general: EC 2002/95 (RoHS), EC 1907/2006 (REACH). 2) industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, D.M. 21/03/73, 3-A n. 18-03-Class II. Inner layer: white rubber bromobutyl (BIIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red rubber CR. Working pressure: 10 bar. Operating temperature: -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Union with thread internal BSP/thread external BSPT, cast iron, type 331/59

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Union with thread internal BSP and thread external BSPT for use in connections pipe installation industrial. sealing flat between internal element. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer dynamic MWSPL with male thread, black resin acetal

          All products | Equipment for pneumatic valves
          0 €
          Silencer dynamic MWSPL with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 30 dB. Material: black resin acetal, insulation acoustic. Operating temperature: od -10°C up to +60°C. Working pressure: 6 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting Tee "L" with thread external BSPT type B8 with a ring cutting Intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee "L" with thread external BSPT type C8 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Exceptionally flexible hose intended for compressed air. Due to such features as: lightness, flexibility in low temperatures, resistance to elongation is especially recommended for tools pneumatic, compressors, hose reels drum, etc. Inner layer: black PVC. Reinforcement: a polyester braid. Outer layer: blue PVC. Working pressure: 15 bar. temperatures use: od -20°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very light, extremely pliable and flexible hose intended for discharge dust, dust, contaminants air, fumes, vapours etc. thanks to unique the structure with longitudinal and transverse reinforcement fibres synthetic and of spiral steel is characterized very small radius bends, resistance on kinking and exceptional resistance on stretching. durable and reliable, commonly used in systems vacuum cleaners industrial and domestic, in works construction for purification and drying and as hose cover. Not contains cadmium in accordance with BGR 132. discharge charges electric through earthing spiral steel. left-handed spiral reinforcing allows screwing on appropriate ends for vacuum cleaners with thread left (ends PVC for hose SUPERELASTIC or other appropriate). possible is also Assembly of the hose with clamps on suitable ends, pipe spigots etc.. Hose material: two layer soft PVC reinforced fiber. Reinforcement: steel spiral coated PVC. Operating temperature: od 0°C up to +85°C (working pressure depends on temperature).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A general-purpose hydraulic hose. standards: EN 853 1SN, ISO 1436-1SN/R1AT, SAE 100R1AT. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single steel braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 250 bar depending on the diameter hose. Operating temperature: od -40°C up to +100°C (momentarily +125°C). For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose cover CABLE ISOL®

          All products | Covers
          0 €
          Thin-walled hose cover reinforced vulcanized a braid synthetic. Material layer outer: black rubber SBR. Operating temperature: od -30°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible hose for air, gases, water and other media. used in systems in which occurs danger accumulation charges electric and in zones hazard explosion. compliant with the directive ATEX (2014/34/UE). resistance surface R 6 Ω. resistant to hydrolysis, microorganisms, abrasion and radiation UV. The calibrated outer diameter allows use with push-in connectors. recommended for applications in industry electronic, painting powder, zones hazard explosion, mining, conveyors and sorters parts. pressure working given at factor safety 2:1 relative to maximum pressure not causing damage hose. Hose material: antistatic polyurethane PUR. Working pressure: from 9 bar to 16 bar (depending on the diameter hose). Operating temperature: od -30°C up to +80°C. Vacuum: for 0.95 bar (at vacuum should increase radius bends o 20%).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          The highest quality hose suction-delivery, intended for conveying aggressive substances chemical, solvents and concentrated chemicals, characterized by high strength thermal and mechanical and highest cleanliness layer internal. Layer inner with white polymer perfluoroalkoxy MFA (polymer fluorine o properties close for PTFE), mirror smooth (prevents deposition medium on walls and is easy in maintaining purity), free of odour and taste, meeting high requirements hygienic (FDA, USP, European EU). layer intermediate with rubber synthetic, contain Reinforcement with cord synthetic, spiral with wire steel. outer Layer with rubber EPDM, antistatic (R 6 Ω ), resistant to abrasion, ozone and conditions atmospheric. hose is characterized excellent resistance chemical and cleanliness MFA, impermeability, resistance to temperature, oxidation and stresses mechanical. Widely used in industry chemical Due to total resistance to action greater substances chemical. appropriate for conveying concentrated acids and alkalis (acid sulfuric, hydrochloric, phosphoric, nitric, lye sodium, potassium etc.). resistant to rigorous conditions cleaning method Cleaning-in-Place (CIP). On special order version M according to EN 12115 with built-in two cables copper ensuring discharge charges electric. standards and requirements: hoses chemical: EN 12115:2011 (type Ω). industry food, contact with food: 1935/2004/EC, 2023/2006/EC (GMP); Inner layer: 10/2011/EU, USP CLASS VI, FDA 21 CFR 177.1550 (e-and); ISO 10993. Contains no plasticisers, phthalates or substances of animal origin. assembly: should use fittings with spigot ("tail" for hose) smooth, not having sharp or high barbs, which could po clamping cut or damage layer inner with MFA. The spigot diameter should be precisely matched to the hose diameter to ensure tightness. Assembly with clamping ferrules or shell clamps. Confirmation of resistance and application conditions requires contact with Tubes International. Inner layer: white polymer MFA. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 16 bar. Operating temperature: od -50°C up to +170°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Insert filter "F" and "FR" for series NEW DEAL.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug quick coupling NiTO of steel stainless AISI 316L with fitting for hose. occurs in two systems 1/2″ and 3/4″. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Not can connect directly element with various systems e.g. socket 1/2″ with a plug 3/4″. Material: steel AISI 316L. Working pressure: 25 bar. Operating temperature: od -20°C up to +150°C. Material seal: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug coupling CAMLOCK FW for welding, steel stainless

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Plug coupling CAMLOCK FW for welding (butt welding) made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
        Go to Top