0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling plug with a flange PN 10 with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Working pressure: up to 10 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Plug coupling dry-break DDC with female thread, aluminum

          All products | Loading and unloading couplings
          0 €
          Plug coupling dry-break DDC with thread internal BSP with aluminum Widely used in transport road, railway, marine, aviation and in industry petrochemical, chemical and pharmaceutical. installed po side tanker. The design plug based is on a valve piston (opens during connecting and closes at disconnection coupling, co eliminates leakage liquids). meets all requirements regarding safety, protection environment natural and reliability at transferring hazardous, toxic or costly liquids. made acc. to standard NATO STANAG 3756 (DDC 2", 2.1/2", 3" and 4") and ATOFINA SGM 2049.TUY.C. (DDC 2", 3"). coupling meet requirements ATEX, TDT, ADR, RID, IMDG, the directive pressure 97/23/WE. has also recommendation council european industry chemical CEFIC. sealing: O-ring (Viton), gasket flat (PTFE). Working pressure: 10 bar. Operating temperature: od -25°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality, strong A clamp with closure articulated for large loads o flanged edges tape, recommended for fastening thick-walled, reinforced hoses industrial and pipes. unique The design ensures even clamping on whole circuit, ensuring optimal sealing. moving A bridge allows multiple assembly without the need removing hose. made in accordance with the directive RoHs 20032/95/EC. three point welds on band, bolt with spacer o high strength together with with half-shafts securing guarantee maximum and secure clamping. A clamp has on band marking diameter minimum and maximum and Material, with which is made. A clamp in version W4 made is entirely of steel stainless and Intended for demanding applications, where essential is high resistance to corrosion - for applications marine and in industry food. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. important! exceeding value torque clamping will cause bend housing screws; not recommended mounting using tools pneumatic. tape and A bridge made are of steel AISI 430, bolt and shafts of galvanized steel. maximum pressure working up to 45 bar dependent is od type hose and diameter crimp.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality three-way ball valve "L" type SK3L with thread internal BSP, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A compact, two-piece medium-pressure ball valve intended for demanding applications general. It can be used for fittings precision ( instrumentation ) for industry chemical, petrochemical, pharmaceutical, power generation, process engineering - for liquids and for gases. intended for mounting in-line. valve is characterized high range size for ensuring appropriate large flow, tightness closing (permissible leakage internal through sealing the ball 0.1 Ncm 3 /min), high durable and low torque swivel. designed for use in position completely open or completely closed. each valve is tested pressure nitrogen. Certified according to ISO 15848-1:2006 (E). Body material: AISI 316 steel. Material the ball and stem: steel AISI 316. Material lever: steel AISI 304, PVC. sealing the ball: modified PTFE. sealing stem: PTFE. Operating temperature: od -42°C up to +204°C. Working pressure: up to 137 bar (depending od temperatures). Connection: BSP female.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve vacuum (air vent) with a thread external, polypropylene

          All products | CAMLOCK couplings and IBC fittings
          0 €
          A valve designed for unloading IBC containers, allowing them to be unloaded without having to remove the cover. For mounting on the upper fill covers with a 2" threaded hole. Material: polypropylene. spring: steel stainless. Sealing: polyethylene (LDPE). Opening pressure: 0.069 bar (1 psi).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Most popular type Due to high resistance mechanical material. widely used for standard applications (air, water, oil, gaz) ale also for connections type „choke and kill”, fracturing and cementing. set: part male, female + A nut. color: red (part male, female), blue (A nut). Material: steel chromium-molybdenum 4130. Connection: NPT female. sealing: metal/metal (cone) + additional gasket edge (NBR). pressure: 15000 PSI (1034 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Swivel coupling SJ with single bearing, intended for connections rigid or flexible lines, when required is, to not occurred carrying torque twisting on other element installation. found use in industry chemical and petrochemical. coupling not is resistant to action large torque bending, in such case recommended is use coupling swivel with double bearing - heavy duty (available on request). coupling Meets the requirements of, the directive pressure 97/23/EC (PED), TDT, TÜV, Apragaz. on request available are also in various combinations the following Connections: thread BSP, NPT, BSPT, ACME, for welding-in, flange PN, ASA, TW, TTMA, coupling grooved. Material: steel AISI 316. Operating temperature: od -40°C up to +250°C. rotation: free, swing. Working pressure: up to 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling bulkhead push-in straight, type R10, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling push-in STECKO, steel free-cutting

          All products | Fittings for high-pressure hoses
          0 €
          Coupling push-in system STECKO for use in systems hydraulic for mining. Material: steel free-cutting, galvanized. sealing: NBR (O-ring), teflon (ring thrust).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Nozzle rubber, series 208

          Air guns | All products
          0 €
          Nozzle rubber for guns CEJN for use on delicate surfaces; direct The installation on tube. available diameter: Ø 14 mm, Ø 25 mm and Ø 34 mm. Working pressure: 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Lever for valves ball BKH, BK3L, SKH, SK3L, alloy zinc

          All products | Directional control valves
          0 €
          Lever hand Intended for valves ball two-way and three-way standard types. in order to correct selection, should check dimension SW square stem a ball valve. Material: alloy zinc.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Head rotary ST-357

          All products | Guns for high-pressure washers
          0 €
          Head rotary ST-357 with a ceramic insert, spray angle 20°. Marked with different colours to identify the calibration. Material: brass and plastic plastic. Working pressure: 100 - 250 bar. Operating temperature: up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Elbow 90° with a male NPT thread steel stainless, 100HM

          All products | Precision threaded fasteners
          0 €
          Elbow 90° with thread external NPT, type 100HM, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting hydraulic DKR for hose UHP steel carbon, type PBW110

          All products | UHP thermoplastic hoses and fittings
          0 €
          A fitting hydraulic (type P - of special „tail” for hose thermoplastic) with thread internal BSP, sealing on a 60° cone (DKR). Intended for crimping in hoses thermoplastic UHP using ferrule crimping, appropriate for type hose. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting flange straight INTERLOCK SAE 3000, steel carbon

          All products | Fittings for high-pressure hoses
          0 €
          A fitting flange straight INTERLOCK SAE 3000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug with a hexagonal head with thread external BSPT (above 3/8" plug occurs with head octagonal). Material: steel AISI 316. pressure working 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Spigot, steel carbon, type SF

          All products | Low-pressure fittings and adapters
          0 €
          A fitting type SF with seal flat, Intended for hoses low-pressure rubber and plastic unreinforced and of reinforcement textile, with external a braid steel. used commonly in flexible lines for fittings sanitary, installation fuel, air etc. use a nut type UM (EC- 105…). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Connector for flexible hoses, brass, type NT-150

          All products | Low-pressure fittings and adapters
          0 €
          Brass connector for flexible hoses. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connector hose SUPERFLEX RADIATOR intended for systems cooling engine in vehicles and engines type automotive (for water, liquids cooling based on glycol ethylene). version of reinforcement textile and spiral steel protecting against collapse bent hose. has „soft” fittings, free of spiral steel, enabling easy and tight assembly on spigots using straps. corrugated externally The design hose bends easily, replacing in many cases original formed connector and ensuring unobstructed solid Flow rate even at strong bending. The design a connector corresponds standard SAE J20 R5 and is resistant to temperature and on fluids cooling used in automotive. no data regarding pressure working. Operating temperature: od -40°C up to +125°C. Material a connector: black EPDM rubber. Reinforcement: textile braid + steel spiral.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          The highest quality, very flexible, resistant to twisting and kinking A universal hose industrial. used in industry, construction, agriculture, quarries, mining and construction ways, in industry petroleum and shipbuilding. Layer inner resistant to action oil, fats, light chemicals, air, kerosene (naphtha), cold and hot water. Layer outer has very good resistance to abrasion and on fats animal and oils. Due to high strength and low expansion especially recommended for hose reels drum. outer resistance to flame compliant with the standard MSHA 2G-14C/39. Non-conductive (R > 1 MΩ/inch of hose length at a voltage of 1000 V DC). Inner layer: black NBR rubber. Reinforcement: an aramid braid, for 2" a synthetic braid. Outer layer: yellow rubber Carbryn® (XNBR, carboxylated NBR). Working pressure: 35 bar. Operating temperature: od -29°C up to +88°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A nut for couplings socket intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Clamp worm-drive bridge right-handed o wide tape 9 and 12 mm Intended for fast and easy repeated fastening hoses reinforced spiral steel, e.g. hoses ventilation. task bridge is enclosing wire spiral and ensuring accurate adhesion clamps for hose. use bridge in clamp ensures tight and non-damaging hose connection. clamp right-handed OMP Intended is for mounting typical spiral hoses ducting of spiral with wire coiled in right e.g. P1PU, P2PU, P3PU, P7PU, SMARTFLEX. unique mechanism worm-drive clamps in compact housing and extruded on cold thread in band, smooth od inside ensure secure multiple clamp without damage surface hose. amount segments dependent od diameter minimum / maximum clamps. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A guard rubber for fittings for hose, type KK, black

          All products | Fittings for hoses for pressure washers
          0 €
          A guard rubber limiting possibility kinking hose at the tip and limiting possibility exceeding minimum radius bending. Do use of standard lines for washing high-pressure DN6. color cover: black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard GT35 made with very dense fabric polyester. Intended for protection single hoses or bundles lines hydraulic and pneumatic. has good resistance mechanical and on oils and products organic. protects hose and secures the operator against spray oil in case rupture hose. Material: polyester. Operating temperature: +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ring securing SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          A ring securing against unintended disconnection for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum) o diameters external od 12 mm for 28 mm). Material: plastic plastic. Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A quick fill / empty cover for an IBC container with two air vents. The cover is supplied with a gasket. Size of the fill hole thread: 2″ BSP Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimping press TUBOMATIC H25 PI

          All products | Hose and tube assembling machines
          0 €
          Crimping press TUBOMATIC H25 PI with pneumatic drive, intended for crimping low-pressure hoses with type EC sheet-metal ferrules. easy and light for carrying device, equipped in three sets (po 6 segments clamping) jaws: 10 ÷ 13 mm, 13 ÷ 16 mm, 16 ÷ 25 mm. range diameters crimps: 10 ÷ 25 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A switch bistable 3-position VRM-313 N

          All products | Equipment for pneumatic valves
          0 €
          A switch bistable 3-position VRM-313 N with short a lever for valve VME. Do mounting required is Adapter VME1-000. color: black.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Industrial Water gun NiTO II

          All products | Low-pressure water spray guns
          0 €
          Industrial, high quality, ergonomic Gun NITO II for water. A handle separated od path flow hot water, co ensures comfort the operator. parts internal with aluminum, brass and steel stainless. housing with high-strength plastic Orgalloy resistant to impact. seal: EPDM / HBR. has smooth adjustment flow and lock trigger. interchangeable nozzles outlet. Working pressure: 25 bar. Flow rate: 20 ÷ 60 l/min (5 bar) depending on mounted nozzle. Flow rate with nozzle standard: 40 l/min. Operating temperature: up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting straight with thread external BSP, brass, type AI 13485

          All products | Low-pressure fittings and adapters
          0 €
          Fitting straight with thread external BSP with gasket flat type AI 13485 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass. gasket: NBR. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Grease nipple 45° DIN 71412 B serving for introduction substances lubricating between cooperating surfaces in order to reduction resistances friction and processes wear. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt stacking for clamp DIN 3015 standard

          All products | Clamps for hydraulic pipes
          0 €
          Bolt stacking for clamp DIN 3015 standard type 100/101 with thread external and internal metric, Intended for mounting clamps one on the other. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Union with 2 x thread internal BSP, cast iron, type 330/48

          All products | Fittings (pipes, fittings and connectors)
          0 €
          Union with 2 x thread internal BSP for use in connections pipe installation industrial. sealing flat between internal element. Material: malleable cast iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal tape coated single-acting adhesive binding at jej tensioning. designed for protection hoses, cables and pipes against intense radiating heat and flames. wall thickness tape to ok. 0.76 mm. at mounting recommended is overlap 50%. Material: fiber with silica (dioxide silicon). Operating temperature: up to +982°C (momentarily up to +1650°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee "Y" 2x female threadint internal BSP 1xgwint external BSPT type A24, intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "T" through-flow, type R22, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: plastic plastic. Working pressure: 12 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +60°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Gasket standard coupling CAMLOCK, Viton

          All products | CAMLOCK couplings and IBC fittings
          0 €
          A standard gasket for the female part (socket) of a CAMLOCK coupling. Material: Viton. Operating temperature: from -40°C to +200°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for extraction light bulk materials SMARTFLEX® 0.4

          All products | Ducting and ventilation hoses
          0 €
          Very light and flexible hose intended for discharge air, dust, dusts, fine sawdust and chips, very light bulk materials etc. Specially designed according to the requirements of the wood and furniture industry, it can also be used in other industries. compliant with the standard DIN 26057 Type 1. Antistatic and flame-retardant, it ensures a high level of work safety. very pliable and compressible, flexible also in low temperatures. With very good abrasion resistance, also resistant to microbes and hydrolysis. Contains no halogen compounds or plasticisers. Resistant to oils and petrol. The optimal flow direction of the medium is marked with an arrow. The hose wall thickness is measured between the spiral. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. Anti-electrostatic properties: permanently antistatic (in accordance with ISO 8031 resistance R 9 Ω, in accordance with the German technical regulations TRGS 727 (6.4.2.4) specific resistance R 8 Ωm, in accordance with directive 2014/34/EU (ATEX) it can be used in specified explosion-hazard zones - which should be preceded by a risk analysis). Po effective both earthing spiral can be treated as conductive electrically – in accordance with recommendations BGI 739-2. Flame-retardant – in accordance with DIN 4102 class B1. Hose material: transparent polyether-polyurethane. Reinforcement: spiral with wire steel. Wall thickness measured between the spiral: 0.4 mm. Operating temperature: od -40°C up to +100°C (momentarily up to +125°C).
        Go to Top