0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off through-flow with thread internal BSP serves for closing flow the medium in installation. intended is for installation aircraft, possible is also its use with non-flammable and non-toxic gases (nitrogen, dioxide carbon, hel, argon, etc.). shut-off valve shut-off takes place through hand turning a knob causing displacement the ball, until for jej complete seal. direction flow Marked is an arrow on body valve. maximum pressure working fixed in full the scope temperatures use. Body material: brass. Material the ball: steel stainless AISI 304. sealing stem: NBR. Working pressure: from 25 bar to 40 bar, depending on the diameter internal DN. Operating temperature: od -10°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve reducing for compressed air REG, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Valve reducing REG type piston, is characterized resistance on heavy conditions use, intended for series NEW DEAL. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2", 3/4", 1". Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Pressure gauge connection: 1/8" BSP female for valve for 1/2" (above - 1/4" BSP female). Flow rate: 650 l/min - 1/4", 2500 l/min - 3/8", 1/2", 4500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight connector JIC 37° with thread external UNF (sealing on a 37° cone). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure adapter (A nut coupling), type A106 with threads internal BSP (sealing flat). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer series NEW DEAL type piston o high degree reliability, intended for compressed-air systems or in the immediate vicinity of actuating devices. Possibility of wall mounting via holes in the body. Size: 1/4", 3/8", 1/2". Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min - 1/4", 2500 l/min - 3/8", 1/2" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket coupling CAMLOCK D with a thread internal, brass

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: brass. Levers: steel AISI 304. Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting hydraulic screw, type S, with a female BSP thread with a nut, cone sealing 60° (DKR). Intended for screwing in hoses rubber and thermoplastic using ferrule screw-together. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Light Water gun, polyamide, AKBO HEAVY DUTY, blue

          All products | Low-pressure water spray guns
          0 €
          Light Water gun AKBO made with polyamide PA66 glass-fiber-reinforced, valve and lever of steel stainless, A guard with rubber EPDM, seal with EPDM and Viton (FDA). has adjustable nozzle outlet, smooth adjustment flow and lock trigger. Meets FDA requirements. used in industry food. Working pressure: 12 bar. Maximum Operating temperature: +50°C. weight: ok. 0.48 kg. Flow rate: 48 l/min (12 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bar directional 2 – output, aluminum

          Accessories for pneumatic fittings | All products
          0 €
          Bar directional 2-output for use in systems pneumatic, allowing on separation compressed air under pressure, on several other branches. has additional holes enabling attachment jej in desired space installation. inlet - threads internal BSP, outlet - threads internal BSP. Working pressure: 12 bar. Operating temperature: od -10°C up to +80°C. Material: aluminum anodized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality aluminum Gun for compressed air, intended for removing with surface all contaminants: liquids, fine chips, filings etc. regulation flow degree press lever. made with forged aluminum, protected anodizing ensures high strength, durability and resistance corrosion. It can be used for water. ideal works even in difficult conditions use. Gun equipped is in nozzle o length 120 mm, with thread connection external M12x1.25. instead of nozzle standard install can other nozzles – see accessories for guns EWO. Connection: plug EUROSTANDARD 7.2. Material: aluminum (forging). Diameter outer nozzle (tubes): 6 mm. length nozzle: 120 mm. pressure maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Directional valve spool, type 4/2, Controlled electrically of centering springs intended for mounting plate. used in systems hydraulic machine industrial. standard supplied with o-rings and screws mounting. A connector equipped is in diode signalling state supply. Material: cast iron (body), hardened steel (spool). sealing: NBR. maximum Working pressure: 315 bar (channels P,A,B), 160 bar (channel T). available on the following voltage control: 12 V DC, 24 V DC, 110 V AC or 220 V AC. Operating temperature: od -20°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Clamp self-closing uncoated Intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). has high resistance to fire, corrosion, radiation UV and high and low temperatures. Material: steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee plug-in "L" adjustable with thread external tapered, type R38, intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose low-pressure delivery INSTA-GRIP™ 300

          All products | General purpose hoses
          0 €
          Classic, high quality, rubber hose self-clamping (PUSH-ON). Do low-pressure installation hydraulic, installation pneumatic and as A universal hose industrial for air, water, oils, greases, light chemicals and liquids cleaning. Widely used in industry automotive (no use silicone in production hose). Layer outer resistant to conditions atmospheric, abrasion and oil. outer resistance to flame compliant with the standard MSHA 2G-14C/14. Non-conductive (R > 1 MΩ/inch at a voltage of 1000 V DC). Safety factor 4:1. The hose is designed to work with self-clamping PUSH-ON type ends. Available in colours: black (BK), blue (BL), green (G), grey (GY), red (R) and yellow (Y). Inner layer: black synthetic rubber Chemivic™ (NBR + vinyl). Reinforcement: a synthetic braid. Outer layer: black, blue, green, grey, red or yellow synthetic rubber. Working pressure: 20 bar. Operating temperature: od -40°C up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, very flexible and pliable, resistant chemical and flame-retardant hose intended for applications in systems air conditioning, ventilation and heating. Do extraction and conveying hot air, aggressive chemical vapours, exhaust gases and gases in systems ventilation and heating. has resistance to UV, ozone and conditions atmospheric. used in equipment vehicles, engines and in industry chemical. is characterized high compressibility - for 1:6, strong design resistant on vibration and stretching, resistance on impacts thanks to outer spiral. Also available with a stainless steel spiral (from 80 mm diameter). Assembly of the hose on connectors with bridge clamps (lewo-handed). Checking chemical resistance - the chemical resistance table for CSM (preliminary selection), confirmation of resistance and conditions of use - by Tubes International. length standard: od 2 for 10 m. Hose material: externally black fabric polyester coated CSM - Hypalon. Reinforcement: outer spiral with wire and sheet steel galvanized. Operating temperature: od -35°C up to +175°C (momentarily up to +190°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, o high durability, A universal hose flat high quality used in industry mining, petroleum, power and agriculture. used in particular for water, sludge, sewage and fertilisers. made with resistant to hydrolysis and microbes polyurethane - polyether. Reinforcement with circumferentially woven braid polyester bonded and surrounded polyurethane in original process production extrusion thermoplastic polyurethane on hot through braid. hose o high strength on force longitudinal, o minimum elongation under pressure (up to 2%) and without tendency for coiling, screwing. thanks to durability connected easily operation (unwinding, laying, storage) Widely used in systems water (dewatering mines opencast, supply in water, drainage and discharge sewage) and not only. resistant to wide range substances chemical, microbes, fungi, hydrolysis, conditions atmospheric, UV and ozone. O sound resistance to abrasion. Available on special order in sections longer than 200 meters in diameters for 6”. in order to confirmation resistance and conditions use hose contact with Tubes International. maximum pressure working time use fixed acc. to coefficient safety 2:1 approved through the manufacturer (only for water and safe, non-flammable liquids). Dla maximum service life not recommended exceeding 1/3 pressure bursting. length standard roll: 200 m. Hose material: black polyurethane - polyether (PU). Working pressure: from 8 bar to 27 bar - depending on the diameter hose and temperatures. Operating temperature: od -50°C up to +75°C (water).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose intended for solvents, paints, isocyanate, polyol, liquids based on water. on request micro-perforated (for gases and air). Inner layer: polyamide. Reinforcement: a double steel braid. Outer layer: polyurethane. Operating temperature: od -40°C up to +100°C (for water and air up to +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose suction-delivery intended for conveying water, beer, wine, alcohols o a concentration up to 20% and other products food. Not recommended for milk and its dairy products, oils and greasy substances food. compliant with the European requirements 1935/2004/EC and 10/2011/EU (simulant fluids A, B and C). along outer layer hose placed is cable antistatic. pressure working is 25% pressure bursting. Hose material: transparent PVC. Reinforcement: grey spiral PVC. Working pressure: from 2.4 bar to 5.6 bar, depending on the diameter hose. Operating temperature: od 0°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Insert DIN 3015 heavy, aluminum, type 201

          All products | Clamps for hydraulic pipes
          0 €
          Two-piece insert clamp DIN 3015 type 201 made in accordance with the standard DIN 3015. standard has profiled (grooved) surface hole for a pipe. Material the insert: aluminum. Operating temperature: up to +350°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug (Adapter) water quick coupling NiTO CLICK 1/2" with socket system NiTO 1/2". quick coupling NiTO CLICK to water quick coupling made according to profile very popular plastic quick couplings garden and compatible with them. sealing using an O-ring placed externally on plug. Manufactured in Denmark – 5-year warranty. They retain the simplicity of the commonly known plastic quick couplings and are characterized by strength and durability. intended for water, water of agents cleaning for use in industry, services, horticulture, agriculture etc. Material: brass chrome-plated (matte - satin). Working pressure: up to 25 bar. Operating temperature: od -30°C up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Cap for socket quick coupling QC4 and QC6 compliant with the standard Standard Instrumentation, with a cable. cap not is designed for carrying pressure. protects plugs and socket od contaminants and damage, when quick coupling is disconnected. Size: 1/4", 3/8". Material: steel AISI 316. Operating temperature: od -26°C up to +204°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check series RFL type U, regulating value flow air only in one direction. serves for regulation speed working equipment actuating in systems pneumatic. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: up to +70°C. Material body: aluminum. Material housing: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling 90° adjustable JIC 37° with thread external and thread internal UNF, A nut (sealing on a 37° cone). Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter - Tee high-pressure type A111 with thread internal 3 x BSP. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A double-sided gasket socket quick coupling with EPDM. resistant to hot water. Operating temperature: up to +90°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nozzle adjustable with adjustable flow Intended for spraying and washing. regulation flow takes place through rotation. Connection: 3/4" BSP female. Working pressure: up to 25 bar. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Filter with reducer (filter-regulator) series SYNTESI®, without end connections, is a device consisting of a filter and a reducing valve. built is with these same components co Filter and reducer, so has such same features technical. It reduces and purifies the air supplied by the compressor. Size: SY1, SY2. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 15 bar for SY1 and up to 13 bar for SY2. Operating temperature: up to +50°C. Connection: 1/8" BSP female ÷ 3/8" for SY1 and 3/8" BSP female ÷ 1" for SY2. Additional connection for a pressure gauge or fittings: 1/8" BSP female for SY1 and 1/4" for SY2. Condensate drain: manual / semi-automatic (RMSA), automatic (RA). Flow rate: 1300 l/min - 1/8", 2000 l/min - 1/4", 3000 l/min - 3/8" (SY1), 5800 l/min - 3/8" (SY2), 7200 l/min - 1/2", 7400 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket coupling CAMLOCK B with a thread external, brass

          All products | CAMLOCK couplings and IBC fittings
          0 €
          Socket coupling CAMLOCK B with a BSPT male thread made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: brass. Levers: steel AISI 304. Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PUSH-ON end with thread internal metric, type YMW111, intended for a self-clamping hose designed for this type of end. Mounted onto the hose without the use of clamps or brackets. It has a special barb profile adapted to the material and dimensions of the PUSH-ON hose and the construction of its braid, causing the hose to clamp onto the barbs of the end. The end must not be used with other hoses or clamped with clamps or brackets, as this risks damaging the hose. Operating temperature: od -40°C up to +80°C. Working pressure in accordance with the specification of the PUSH-ON hose. Material: galvanised carbon steel, brass, AISI 316 steel.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp DIN 3015 standard, rubber, type 101

          All products | Clamps for hydraulic pipes
          0 €
          A DIN 3015 standard clamp, type 101 (with a top plate) Intended for fast, easy, durable and aesthetic fastening pipes, cables and hoses in various branches industry, in installations above-ground and marine. made in accordance with the standard DIN 3015. assembly clamp for the structure performed is using welding base clamp (exists possibility screwing or mounting on a rail). standard A clamp has profiled (grooved) surface hole for a pipe. Available is also A clamp with smooth surface hole, Intended for hoses and cables, marked with the letter H on the end index. Dla group dimension 0 occurs one bolt with a hexagonal head, for group dimension 1 ÷ 6 available two screws with a hexagonal head. besides standard element metal can order: plates extension, rail and screws for mounting sets clamps. selection element should consulted with TUBES INTERNATIONAL®. Material clamp: rubber. Material bolts: steel galvanized. Material plate: steel galvanized. Material base: steel carbon. Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality aluminum Gun for compressed air, intended for removing with surface all contaminants: liquids, fine chips, filings etc. regulation flow degree press lever. made with forged aluminum, protected anodizing ensures high strength, durability and resistance corrosion. ideal works even in difficult conditions use. Gun equipped is in nozzle SAFETYSTAR, replaceable, with thread connection external M12x1.25, bent o length 110 mm of nickel-plated steel. ideal works for blowing out places hard reachable, improving simultaneously conditions use through reduction level noise for 80 dB. instead of nozzle SAFETYSTAR install can other nozzles – see accessories for guns EWO. depending on the connection we distinguish Gun terminated a plug EUROSTANDARD 7.2, fitting for hose o diameter 6 mm, 9 mm and 13 mm or thread internal 1/4". Material: aluminum (forging). pressure maximum: 10 bar. pressure operating: 2 ÷ 8 bar. Operating temperature: od -10°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Double ball valve (Directional valve) for compressed air and water. Material body: steel carbon galvanized. Material the ball: brass chrome-plated. sealing the ball: PTFE. inlet with thread internal, outlet with thread external or with cast iron couplings claw o spacing lugs 42 mm, with seal rubber (NBR) or brass. Lever with an end alloy. has venting. Working pressure: 10 bar. Operating temperature: od -20°C up to +100°C. solid, maintenance-free The design. used in compressors and equipment construction and industrial.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Actuator plunger single-acting operation with screwed-on gland, intended is for systems hydraulics power. depending on use should select buoyancy (expressed in kG/100 bar) and stroke actuator St. sets repair seals available on request. Piston diameter: Ø 25 mm ÷ Ø 60 mm. stroke working: od 100 mm for 700 mm. maximum Working pressure: up to 210 bar. medium: oil hydraulic. Material: steel carbon, cast iron (gland). coating protective: plunger chrome-plated, rest without coating. sealing: PU, POM, NBR. Operating temperature: od -30°C up to +110°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Clamp self-closing uncoated Intended for easy and simple mounting manual or at use tool for tensioning and cutting (index: BD-KE9229). has high resistance to fire, corrosion, radiation UV and high and low temperatures. Material: steel AISI 316.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule screw for hoses thermoplastic type OL5 or VE5. Use only with fitting screw-together od this the same supplier (TI-S...). Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose for cement, sand, gravel, feed, seeds VOLGA SUPER®

          All products | Bulk material transfer hoses
          0 €
          A strong suction-delivery hose intended for conveying dry abrasive substances. Layer inner smooth, antistatic, very resistant to abrasion (50±5 mm 3 acc. to ISO 4649, formerly DIN 53516). A built-in copper wire which, after earthing (or connection to an earthed end), discharges electric charges. Layer outer resistant to conditions atmospheric and ozone. hose intended for conveying dry strong abrasive substances: cement, sand, gravel etc. Inner layer: black rubber NR/SBR. Reinforcement: cord synthetic, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar - depending on the diameter hose. Operating temperature: -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light, flexible hose in a twin version (two hoses with a welded outer layer) intended for oil installation hydraulic, gases, air, fuels, liquids based on water. standards: DIN 24951, SAE 100R7, ISO 3949-R7. Outer layer: micro-perforated polyurethane. Working pressure: from 157 bar to 215 bar, depending on the diameter hose. Operating temperature: od -40°C up to +93°C (for water and air up to +65°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High-pressure, very durable hose for conveying compressed air. designed for use in heavy conditions squares construction, mines etc. for supply equipment o high wear compressed air. extremely strength and durable thanks to high quality materials and double-jacket the structure – double reinforcement with circumferentially woven braid polyester high strength, completely coated and lined thermoplastic polyurethane (PU). hose o very sound resistance to abrasion, resistant to puncture, abrasion and oil. hose not extends under pressure and is resistant to loads longitudinal. flat at rest, co facilitates operation and storage. Available in the molds ready lines o length 20 or 40 m, with factory mounted fitting. use for air under high pressure should be always preceded analysis risk in case accidental disconnection or bursting hose and possible use protections. maximum pressure working hose fixed acc. to coefficient safety 4:1 approved through the manufacturer for air. Not recommended exceeding 1/3 given force breaking. Hose material: polyurethane (PU). Reinforcement: double polyester braid. Outer layer: orange polyurethane PU). Working pressure: from 30 bar to 43.75 bar - depending on the diameter hose. Operating temperature: od -50°C up to +110°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Quick-coupling plug cap QC4 and QC6 compliant with the standard Standard Instrumentation, with a cable. Size: 1/4", 3/8". cap not is designed for carrying pressure. protects plugs and socket od contaminants and damage, when quick coupling is disconnected. Material: steel AISI 316. Operating temperature: od -26°C up to +204°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Stainless valve hygienic of couplings TRICLOVER, intended for industry food, pharmaceutical, cosmetic, biotechnology and chemical, made in accordance of the standard sanitary 3-A (63-03 and 78-01). Roughness surface internal Ra < 0.8 µm. sealing has certificate PZH. Note: sizes od DN10 for DN20 equipped in lever with plastic. Material body: steel AISI 304. sealing: VMQ (silicone). Operating temperature: od -20°C up to +100°C (short sterilization steam water up to +120°C; cleaning weak solutions acids and bases up to +70°C). Class tightness: A acc. to DIN EN 12266-1. Working pressure: 10 bar
        Go to Top