- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose HYPERLINE SB (HYDRAFLON) has layer inner made with high quality seamless PTFE ensuring minimal porosity, maximum flexibility and resistance to vibration. braid made is with treated thermally wire of steel stainless AISI 304 o strength 1700 MPa. used for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water, etc. - as well as for classic installation high-pressure oil hydraulic. hose HYPERLINE SB is version hose SMOOTHBORE of wall o medium wall thickness and diameter internal adjusted for standard ends hydraulic; assembly using standard straight jaws clamping. W case when identified is hazard electricity static (danger formation and accumulation charges electric, should use hoses HYPERLINE SB, in version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE graphite) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation charges electric. at temperature use above +130°C maximum pressure working should reduced o 0.75% on each 1°C rise temperatures. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 80 bar to 350 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose delivery for cleaning and washing installation and machine in industry food steam water and hot water. Layer inner Meets FDA requirements 21 CFR 177.2600 and BfR XXI kat.2. Layer outer resistant to fats vegetable and animal. hose high quality, commonly used for cleaning and washing hot water or steam installation and machine in industry food (e.g. dairies, industry meat). Note: not should use hose simultaneously for water and steam water. Do steam water use special fittings bolted screws intended for steam water. in order to extending service life should empty hose with steam po use, by avoid accumulation condensate. length standard roll: 60 m (or 120 m - contact with Tubes International). Inner layer: white rubber butyl. Reinforcement: cord synthetic. Outer layer: blue NBR rubber/PVC. Working pressure: 6 bar (10 bar - for water). factor safety: 10:1 (3:1 - for water). Operating temperature: od -30°C up to +165°C (od -30°C up to +95°C - for water).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose intended for equipment for pressure washing hot water. Layer inner resistant to detergents, Layer outer resistant to abrasion, oils, ozone and conditions atmospheric. standards: ISO 1307. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: black or blue synthetic rubber (micro-perforated). Working pressure: 250 bar or 400 bar, depending on type hose. Operating temperature: od -40°C up to +120°C or od -40°C up to +150°C, depending on type hose.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug coupling CAMLOCK A with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LAUX 42 lever coupling plug with connection for welding-on with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. Material: steel AISI 316. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling plug with fitting rolled for hose with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Working pressure: up to 10 bar (up to 8 bar – for size 216 mm).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong A clamp screw-type with closure articulated for large loads is characterized strength design and two full pins. recommended for tight connections thick-walled, reinforced hoses industrial. A clamp made with high quality tape steel o wide od 18 mm for 26 mm. flanged edges tape prevents damage surface hose, on which works A clamp. A clamp has on band marking diameter minimum and maximum and Material, with which is made. thanks to hexagonal head screws possible is use commonly used tools, as keys flat, push-on, adjustable. Material: all element made of galvanized steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCaps heat-shrink intended are for securing line po earlier cleaning. eliminate possibility re contamination line, which is problematic and has space in traditional methods (badly matched plastic plugs czy caps inserted or screwed-in for ends can leave particles resulting through shearing material thread). caps heat-shrink not leave po itself no contaminants. until are on ends cleaned previously line we have guarantee, that is on still clean. removal such caps consists in on pulling black stripe (placed along caps) in direction fittings line. caps are single-use use and re ich use is impossible.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValves VODE used in systems hydraulic as element controlling and locking movement actuator double-acting operation. enable gentle descent actuator under load. value pressure opening sets using bolts (setting a wrench Allen, lock a lock nut). value setting must be o 30% greater, than value pressure resulting with loads receiver. standard pressure opening valves check is 0.5 bar. valves equipped are in holes assembly. Material: steel galvanized (body), steel galvanized (valve). sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way ball valve type RKH with thread internal BSP, intended for high-pressure installation hydraulic and industrial. in order to correct selection valve for media other than oil hydraulic and for high temperatures use, should consult with Tubes International. Material: steel stainless AISI 316Ti (body, ball, stem). seal: POM or PTFE (ball), NBR or FKM (stem). Operating temperature: od -40°C up to +100°C (POM); od -200°C up to +250°C (PTFE); od -20°C up to +100°C (NBR); od -20°C up to +200°C(FKM).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure valve needle intended for mounting in installation or mounting panel. Characterized compact design o relatively high flow. version with stem control. each valve is factory tested. valve has special design, allowing on assembly panel without the need removal needle, thanks to this not loses warranty the manufacturer. Coupling material: steel AISI 316. Material stem: steel AISI 316. sealing valve: metal/metal (steel AISI 316). sealing gland: PTFE. Operating temperature: up to +230°C. Working pressure: up to 345 bar. Connection: metric LET-LOK®.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve fast trigger type VSR L in version ended on both sides couplings push-in (line - line), trigger silenced at use built-in silencer. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve FPM limits maximum pressure in system. allows free Flow rate liquids hydraulic between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. maximum value pressure sets using screws (setting a wrench Allen, lock a lock nut). should pay attention particularly attention, to not set value pressure larger than 250 bar (max. pressure use for body valve). Material: aluminum (body), steel galvanized (stem). sealing: NBR. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve check type FPR intended for high-pressure installation hydraulic and industrial. closes Flow rate medium in one direction and opens free Flow rate medium in direction opposite. standard pressure opening: 0.5 bar (available also 2.5, 5 and 10 bar). permissible direction flow A → A1. Material: steel AISI 316 (body), steel AISI 316 (stem). sealing: FKM. Operating temperature: od -10°C up to +180°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling IBC with a thread internal trapezoidal compliant with the DIN EN 12713 standard and of coupling type CAMLOCK A (plug). The trapezoidal threads that the IBC couplings are fitted with as standard match 100% the threads in the IBC containers of various manufacturers. Material: polypropylene. gasket: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling reloading TW type MK with thread internal BSP. Made in accordance with the EN ISO 14420-6 standard (formerly DIN 28450). intended for liquids, bulk materials and gases (with the exception liquefied gas and steam). Material: steel AISI 316. pressure: od -0.8 bar up to 16 bar. Operating temperature: od -20°C up to +65°C (should take into account medium and Material seal). sealing coupling (type the gasket GSD, for 4" type TWO): hypalon. sealing thread (type the gasket GD): teflon.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling elbow for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling reducing with thread external BSPT and thread internal BSP for use in connections pipe installation industrial. Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection angled 90° with thread external BSPT type B5 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-on with thread external type C1/Z intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality Connection angled 90° with thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60115. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with thread external cylindrical, series F type R 1 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Material: brass nickel-plated. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-in straight with thread external, type R1, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter reducing of steel stainless type 62040 with thread external BSPT and thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA coil 22 mm for valves series 70 of size 1/8" and 1/4", stem Ø8. Insulation class: F155. Voltage tolerance: -10% for +15%. Protection degree: IP65 DIN 40050 with a connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-way solenoid valve VCF intended for high-pressure installation hydraulic. variant normally closed (NC). valve equipped is in holes assembly (shown on photo). connector for order separately. Material: aluminum (body), steel galvanized (valve). sealing: NBR. Protection degree: IP65. Working pressure: 250 bar. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery straight, hand device for bending pipes hydraulic in the scope diameters external 6 ÷ 18 mm intended for small workshops. W set roll bending and durable sheet-metal Case. device adapted for mounting in vice (vice not is in set). weight: 10 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDo connecting individual element on inlet/the outlet (modules) system Syntesi® type SY1 or SY2 (of each other as and with installations pneumatic) serves hexagonal Adapter made with brass nickel-plated, which easily can remove using two bolts. Material adapter: brass nickel-plated. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket reducing lever coupling FERRARI with fitting for hose, type F.10, for use between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: rubber NR-SBR. Operating temperature: od -20°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling DN11.8 with thread internal facilitating fast connection gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. sealing: Viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality socket water quick coupling NiTO 1/2" with thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK D with a thread internal BSP or NPT made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange straight INTERLOCK SAE 6000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose with thread external type A19, Intended for connecting element pneumatics. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a female BSP thread, with seal on cone 60° with an O-ring (DKOR), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass A fitting for hose, NiTO type A with thread internal BSP with seal flat, A nut hexagonal. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNP terminated thread external tapered BSPT of steel AISI 304 with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for cleaning hoses and pipes intended for equipment ULTRACLEAN. used tam, where on surface internal hoses and pipes deposits Layer scale, rust and other contaminants. cleaning consists in on perforating plug using compressed air. Available range diameters 6 ÷ 110 mm. possibility sale in packaging collective (amount pcs in packaging collective dependent is od diameter outer plug).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBody angled coupling BANJO with thread internal BSP type D12. screws through-flow for body: D7, D8, D9, D10. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCable protecting against effects accidental disconnection hose. version AC and BC has copper ferrules and Intended is for applications in mining. Material cable: steel galvanized or steel stainless.



















































