- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 90° INTERLOCK SAE 3000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 90° INTERLOCK SAE 6000, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 90° NON SKIVE SAE 3000 (SFL 90), series light, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 90° NON SKIVE SUPERCAT (SFC 90), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange 90° TRICLOVER with smooth "tail" for hoses rubber and plastic and hoses rubber with layer plastic UPE, PTFE, FEP, MFA, PFA. Do use in industry pharmaceutical, biotechnological, cosmetic, food and chemical, for media liquid and o high viscosity. pressure working is depending on the size coupling and type used clamp (co least 16 bar for size 2", 10 bar - above 2"). assembly: ferrules clamping TI-LR, TI-LDR or using clamp shell RS. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange straight NON SKIVE SAE 3000 (SFL), series light, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange straight NON SKIVE SUPERCAT (SFC), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 (SFL), angled 45°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 (SFL), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 (SFL), angled 90°, series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 SUPERCAT (SFS), angled 90°. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 (SFL), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange SAE 6000 (SFL), series heavy. Intended for crimping in hoses hydraulic and industrial using ferrule crimping, appropriate for type hose. surface coated zinc-nickel o wall thickness layer 6-10 µm, which is characterized very high resistance on corrosion (for 720 hours without corrosion in chamber salt). Material: steel carbon, zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting for hose NiTO of steel stainless AISI 316L with thread external. occurs in two systems 1/2″ and 3/4″. used in conditions elevated requirements in the scope hygiene and resistance to corrosion (e.g. industry food, hospitals). Material: steel AISI 316L. Working pressure: up to 25 bar. Operating temperature: od -20°C up to +150°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting rotational AK with thread external tapered BSPT without flange. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, rotation of the gun is required. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting rotational AK with thread external tapered BSPT without spring anti-kink. Intended for mounting in industrial hoses, in particular washing hoses at the point of connection with a water gun, where, due to operating the gun, rotation of the gun is required. Material: steel AISI 316. Working pressure: up to 40 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew A fitting threaded type S3 with thread external NPT (sealing on the thread), made in accordance with the standard EN 14424, Intended for hoses rubber and some types hoses with plastics thermoplastic, with soft reinforcement textile (without spiral with wire). used commonly in sector fuel in lines distribution fuels and gases (e.g. LPG). basic version made completely with brass; Available also in version of steel stainless (A fitting) with ferrule with brass chrome-plated. Material: brass (B). Working pressure: 16 bar (up to 25 bar for DN25). Operating temperature: od -20°C up to +65°C (od -30°C up to +70°C - for LPG).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a female BSP thread series 1D type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for flexible hoses with PFA, which for mounting should ends expand thermally (tzw. flared connection). such solution guarantees no deposition particles, accumulation bacteria and elimination leakage medium. Material: PFA, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a female BSP thread type EM, found wide use in laboratories, medicine (e.g. devices for dialysis), industry pharmaceutical, chemical and food. has integrated ferrule, a locking hose occurs using ring clamping, is found inside knurled a nut. thanks to its flexibility ring clamping It can be used several times in this same coupling. Intended is for flexible, smooth, unreinforced hoses, PVC, PA, PUR, PTFE, FKM, silicone and hoses TYGON ®. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a female BSP thread series 1C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting. locking occurs using ring cutting, made with PEEK and a nut knurled. sealing ensures ring sealing made with PTFE. Intended is for smooth unreinforced hoses and tubes with harder plastics e.g. with PTFE, PFA, FEP, PA, PE. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a female BSP thread series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass, metal, polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in the tip occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a male BSP thread type EM, found wide use in laboratories, medicine (e.g. devices for dialysis), industry pharmaceutical, chemical and food. has integrated ferrule, co facilitates assembly, a locking hose occurs using ring clamping, is found inside knurled a nut. thanks to its flexibility ring clamping It can be used several times in this same coupling. Intended is for flexible, smooth, unreinforced hoses, PVC, PA, PUR, PTFE, FKM, silicone and hoses TYGON ®. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a male BSP thread series 1B type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting, a locking occurs using a nut knurled, which clamps flexible hose on ferrule connecting. possible multiple assembly. Intended is for flexible hoses with plastic (PVC, silicone ) reinforced a braid o specified wall thickness wall. A fitting withstands short strokes pressure up to 30 bar at temperature +20°C. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a male BSP thread series 1C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. assembly takes place through pressing hose on integrated sleeve connecting. locking occurs using ring cutting, made with PEEK and a nut knurled. sealing ensures ring sealing made with PTFE. Intended is for smooth unreinforced hoses and tubes with harder plastics e.g. with PTFE, PFA, FEP, PA, PE. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a male BSP thread series 1D type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for flexible hoses with PFA, which for mounting should ends expand thermally (tzw. flared connection). such solution guarantees no deposition particles, accumulation bacteria and elimination leakage medium. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight for hose with a male BSP thread series 2N type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. Intended is for rigid hoses and tubes made with fluoropolymers PTFE, FEP, PFA, tubes glass, metal, polyamide (PA) and tubes made with polyethylene (PE). locking hose/tubes in the tip occurs using ring cutting and a nut. sealing connections ensures ring with PTFE. solution to eliminates reducers cross-section hose, co in effect not affects on Flow rate media. available are other sizes and diameter ends and connector. Material: polypropylene, PVDF. Working pressure: 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight INTERLOCK with a female metric thread, 24° cone with an O-ring, series heavy, for hose type 4SH, R13 and R15. Material: steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight INTERLOCK with a male BSP thread, 60° cone, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight JIC INTERLOCK with a male NPT threadF, 60° cone, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight JIC INTERLOCK with a female UNF thread, 74° cone with an O-ring, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight JIC INTERLOCK with a male UNF thread, 74° cone, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a male UNF thread, with seal on cone 74° (AGJ), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a male UNF thread, with seal flat (AGO), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a female UNF thread, with seal on cone 74° (DKJ), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a female UNF thread, with seal flat (DKO), Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight TRI-CLAMP with a female BSP thread series 3C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. A fitting Tri-Clamp (Triclover) made is in accordance with standards DIN 32676, ISO 2852 and BS 4825 and terminated thread internal BSP. supplied without the gasket, which depending on medium should order separately. the gasket available are with material made with EPDM, FKM, Gylon® and PTFE. Material: polypropylene, PVDF. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight TRI-CLAMP with a male BSP thread series 3C type EM, found wide use in laboratories, medicine, industry pharmaceutical, chemical and food. A fitting Tri-Clamp (Triclover) made is in accordance with standards DIN 32676, ISO 2852 and BS 4825 and terminated thread external BSP. supplied without the gasket, which depending on medium should order separately. the gasket available are with material made with EPDM, FKM, Gylon® and PTFE. Material: polypropylene, PVDF. Working pressure: 6 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight with valve throttling for hose thermoplastic FR 5 DN2 (1/12"), with thread internal UNF, type SAE, 45° cone. Material fittings: brass. Material ferrule: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight with a ferrule for hose thermoplastic FR 5 DN2 (1/12"), with thread internal UNF, type SAE, 45° cone. Material fittings: brass. Material ferrule: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight with a ferrule for hose thermoplastic FR 5 DN4 (5/32"), with thread internal UNF, type SAE, 45° cone. Material fittings: steel carbon, galvanized. Material ferrule: aluminum.



















































