- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate bottom multiple for welding for mounting clamp DIN 3015 double type 301. number clamps: 5. Material: steel carbon or steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top double for mounting clamp DIN 3015 heavy type 201. Material: steel carbon, galvanized or steel AISI 316L.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top protecting stacking for mounting clamp DIN 3015 heavy type 201. Material: steel carbon, galvanized or steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlate top protecting stacking for mounting clamp DIN 3015 double type 301. Material: steel carbon, galvanized or steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFloat FLOWSAFE has been designed for all hoses used in industry marine. W particular refers to to hoses supply in connections between ship a platform drilling. thanks to floats hoses keep on surface water, co causes no the ability ich damage through bolt drive ship and allows vessel floating on manoeuvring. Float can also serve as A guard protecting hose. It can be used both for hoses delivery (without spiral) as and suction- delivery (of spiral steel) in sizes 3", 4" and 5". fixed hose clamps of steel stainless placed in grooves float. W case use floats for hoses delivery for float should additional use special cable steel, which attaches Float for hose and will prevent its displacement, when hose is operated and not has in nim pressure. is flexible, unsinkable, non-absorbent (pores in 100% closed). Not shrinks and not deforms. resistant to radiation UV. Material: Bacell® - special foam with plastic EVA. buoyancy: 16 kg. weight: 2 kg. volume: 18 dcm 3
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWasher aluminum Intended for bolts Banjo. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWasher copper for use in installations high-pressure (for quick couplings, adapters with thread external). Working pressure: up to 2000 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBase for manual press crimping UPJ.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBase for manual press crimping UPS.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble nipple with male thread 1/4" BSP / M12x1.25 male, serving for connections nozzle BLOWSTAR with gun for air EWO. Material: aluminum.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover for an IBC container with a thread internal DIN EN 12713 and gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCover for an IBC container IBC with a hole with a thread internal BSP. The hole can be used for filling the container. The cover is supplied with a gasket. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (momentarily up to +80°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSemi-automatic device for bending pipes hydraulic with pump hydraulic o drive electric. The design and principle operation consisting on wrapping tubes on rotating template. device controlled electronically with built-in panel allows achieving precise bending. Po pressing button „start” on panel control The machine independently bends pipe o set angle without additional interference of side the operator. optionally Available double pedal electric with switch safety. tools (templates), on which bent is pipe ordered separately (18 sizes). range bending pipes: 6 ÷ 50 mm (Wall thickness 3 mm). supply: 400 V, 50/60 Hz, 1.1 kW. maximum angle bending: 180°. speed bending o angle 90°: 6 seconds. accuracy bending: ±1°.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), type B25B1, o meshing external, Intended for use in systems hydraulic machine and equipment. Material: body – aluminum, plate mounting and Cover rear – cast iron. sealing: NBR. viscosity liquids: from 12 cSt to 800 cSt (recommended od 17 for 65).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), type P38P2, o meshing external, Intended for use in systems hydraulic machine and equipment. Material: body and plate mounting – aluminum, Cover rear – cast iron. sealing: NBR. viscosity liquids: from 12 cSt to 800 cSt (recommended od 17 for 65).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: threaded BSP. direction revolutions: left. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: flange. direction revolutions: left. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: threaded BSP. direction revolutions: left. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: flange. direction revolutions: left. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: threaded BSP. direction revolutions: left. given maximum pressure working refers to use continuous. Material: body – aluminum, plate mounting and Cover rear – cast iron. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: flange. direction revolutions: left. given maximum pressure working refers to use continuous. Material: body – aluminum, plate mounting and Cover rear – cast iron. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: flange. direction revolutions: right. given maximum pressure working refers to use continuous. Material: body – aluminum, plate mounting and Cover rear – cast iron. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPump displacement toothed (hydraulic), TRALE, o meshing external, Intended for use in systems hydraulic machine and equipment. Connections: flange. direction revolutions: right. given maximum pressure working refers to use continuous. Material: body and plate mounting – aluminum, Cover rear – aluminum. sealing: NBR. medium: oil hydraulic type L-HM45 or replacement. viscosity liquids: from 10 cSt to 600 cSt (recommended 30 ÷ 45). Operating temperature: od -20°C up to +90°C (medium), od -20°C up to +60°C (ambient).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLevel gauge intended for observation level oil hydraulic, mounted on side wall bowl. equipped is in Float lifting on surface oil. signals minimal level liquids in tank (bottom position float). oil penetrates for the inside level gauge through holes in screws assembly type BANJO. Material: polyamide (body), aluminum (housing), methacrylate perbexu (hole inspection). maximum Working pressure: 2 bar. signal electric: maximum 48V AC/DC and 0.5 A. Protection degree: IP 65. Operating temperature: od +5°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle o high flow for washing and cleaning water. ideal for washing large surface e.g. tanks, cars trucks, vessels, in short time. is characterized high flow and strong a stream at low pressure supply. Smooth regulation nozzle - angle spray and opening and shut-off stream through rotation ring the head. made of steel stainless (steel AISI 304), high-strength plastic cover (POM) and ring with rubber EPDM. Working pressure: up to 16 bar. temperature use continuous: up to +60°C. Flow rate: 300 l/min (4 bar), 500 l/min (16 bar). weight: 0.8 kg. Connection: 1" BSP male.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, ergonomic nozzle with smooth regulation flow through rotation the head (closed - narrow stream - wide stream). nozzle with brass, head and A handle with blue polypropylene. Connection: 3/4" BSP male. Working pressure: up to 16 bar. Operating temperature: up to +50°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar). length: 239 mm.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDurable a guide hose for use with gun for washing high-pressure. limits possibility kinking hose on the height the connection for gun. Intended for hose DN6 and DN8.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCounter-flange SAE 3000 with thread internal for connections with a flange connection, without bolts mounting and seal. Material: steel AISI 316L. Operating temperature: od -20°C up to +200°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCounter-flange SAE 3000 with thread internal for connections with a flange connection, without bolts mounting and seal. Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCounter-flange SAE 3000 with socket for welding-in for connections with a flange connection, without bolts mounting and seal. Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAn extension straight or bent for guns for air with thread internal M12x1.12. Available in four various lengths (150 mm, 300 mm, 450 mm and 800 mm). An extension allows access for hard reachable places, thanks to which safety use is higher, a conditions use are more comfortable. extensions can be mounted together with of all nozzles with thread M12x1.12. Od side mounting for body gun extensions have a nut locking in order to correct settings. increases safety and comfort use. Material: aluminum anodized. Working pressure: 10 bar. Operating temperature: od -10°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA switch pressure used in systems hydraulics power. signals reaching specified value pressure oil. regulation signalled value takes place using a knob. assembly possible is at means thread or the connection plate. Material: aluminum (body). sealing: NBR. range regulation pressure: 2 ÷ 400 bar. maximum load: 5 A at 250V AC; 0.25 A at 125V DC. Protection degree: IP 65. Operating temperature: od -20°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve VSF supplies oil hydraulic od the connection P1 or P2 for the connection U. source supply is Connection o higher pressure oil (second Connection P1 or P2 is automatically blocked using moving balls). valves equipped are in holes assembly. Material: steel galvanized (body), steel galvanized (valve). sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSolid nozzle for washing and cleaning water, which stream adjustable is using manual deflection rubber nozzle. Flow rate is closed, when nozzle not is bent, co ensures saving water and time at use. nozzle is extremely resistant to damage (through stepping on, driving over vehicle etc.). Water Saver occurs in 4 versions with nozzles o different diameter and flow (type L, M, R and S). made with brass, nozzle with black rubber nitrile. Working pressure: up to 7 bar. temperature use continuous: up to +65°C (momentarily up to +100°C). length: 230 mm. Connection: 3/4" BSP female with gasket.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSolid nozzle for washing and cleaning water, which stream adjustable is using manual deflection rubber nozzle. Flow rate is closed, when nozzle not is bent, co ensures saving water and time at use. nozzle is extremely resistant to damage (through stepping on, driving over vehicle etc.). Water Saver occurs in 4 versions with nozzles o different diameter and flow (type L, M, R and S). made of steel stainless, nozzle with black rubber nitrile. Working pressure: up to 7 bar. temperature use continuous: up to +65°C (momentarily up to +100°C). length: 230 mm. Connection: 3/4" BSP female with gasket.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCalorimetric meter flow rate flow air or nitrogen in installation, optionally for other gases. occurs in two ranges pressures up to 16 bar and up to 40 bar. principle measuring calorimetric consists in on cooling heated electrically sensor through flowing air. cooling sensor is directly dependent od flow mass air, hence not requires compensation pressure and temperatures. meter digital measures momentary flow flow and counts using pulses total wear compressed air. is to displayed on display, a all measurements can be transmitted through coupling to the standard Modbus RTU. Flowmeter can be quickly and easily removed without removing entire section measurement with installation in order to cleaning or calibration. cap for flowmeter ensures continuous use with lines in time cleaning. line bypass section measurement not is required. Flowmeter EW 850 thanks to its compact construction It can be used for measuring flow and wear air we all places installation od compressor until for smallest equipment and tools. range measuring should be selected appropriate for flow in installation. Due to possibility occurrence errors measurement necessary is avoiding condensation on element sensor or moisture conveyed medium. Not should exceed ranges use flowmeter! at selecting flowmeter for other gases than air or nitrogen please o contact with Tubes International. Working pressure: up to 16 bar or up to 40 bar. Material: steel stainless AISI 304 (section measurement, for version 16 bar), steel stainless AISI 316 (section measurement, for version 40 bar), polycarbonate (housing). medium: air, nitrogen (option - other gases). unit flow: m³/h, l/min. accuracy: ± 1.5% value measurement, ± 0.3% full scale. outlet analogue: 4 ÷ 20 has,
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine thermoplastic terminated a plug TEMA 100 with a plug TA-M-120 and socket TA-M-150 TEMA 100. length line: 2.5 m. Operating temperature: od -40°C up to +93°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strong and flexible, multi-braid line, used mainly for high-pressure cleaning and cutting water, hydroforming, hydraulics, injection chemicals and lubrication under high pressure. line is tested pressure and supplied of appropriate certificate. meets standard EN 1829-2. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material fittings and ferrule: steel stainless (A fitting), steel carbon, galvanized (ferrule). Working pressure: 3035 bar. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReady, strongest and flexible, eight-braid line, used mainly for high-pressure cutting water, hydroforming and applications laboratory. line is tested pressure and supplied of appropriate certificate. Inner layer: POM (polyoxymethylene). Outer layer: PA (polyamide). Material fittings and ferrule: steel stainless (A fitting), steel carbon, galvanized (ferrule). Working pressure: 3200 bar. Operating temperature: od -30°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for pressure gauge 90° with thread internal inch BSP, adjustable and standard for standards ISO 15171-2, thread external M16x2, od side fittings measurement. coupling occurs in two variants: of free flow and with silencer strokes pressure. Material: steel with coating zinc-nickel. Working pressure: 630 bar. sealing: NBR. Operating temperature: od -30°C up to +120°C.



















































