- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for pressure gauge with thread internal inch BSP or NPTF, bulkhead and standard for standards ISO 15171-2, thread external M16x2, od side fittings measurement. coupling occurs in two variants: of free flow and with silencer strokes pressure. Material: steel with coating zinc-nickel. Working pressure: 630 bar. sealing: NBR. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° o compact construction with a flange o diameter pitch holes od 30 mm for 55 mm, with thread connection internal BSP. used in connection pumps hydraulic. standard equipped in set bolts, washers and O-ring. Material: aluminum. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° SAE 3000 o compact construction with socket 24° DIN 2353 under tube metric for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). occurs as: L (series light), S (series heavy). Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° SAE 3000 o compact construction with thread internal BSP for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° SAE 3000 o compact construction with thread external BSP for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° SAE 3000 o compact construction with socket for welding-in for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange 90° SAE 6000 o compact construction with socket for welding-in for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange SAE 3000 o compact construction with socket for welding-in for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange SAE 3000 o compact construction with socket for welding-in for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange SAE 6000 o compact construction with thread external BSP for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection flange SAE 6000 o compact construction with socket for welding-in for use in systems hydraulic. supplied of screws fixing and seal O-ring (NBR). Material: steel carbon, galvanized. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for pressure gauge with thread internal and fitting Intended for micro-hoses, complete with a clamping ferrule. Connection occurs in two variants: with a nut swivel (with thread metric and BSPT, sealing O-ring NBR) and a nut constant (with thread NPTF and BSPT). Material: steel with coating zinc-nickel. Working pressure: 500 bar or 630 bar - depending on size hose. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection for pressure gauge with thread internal inch BSP or NPTF and standard for standards ISO 15171-2 thread internal M16x2, od side fittings measurement. coupling occurs in two variants: of free flow and with silencer strokes pressure. Material: steel with coating zinc-nickel. Working pressure: 630 bar. sealing: NBR. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection metric ISO 12151-2 24° cone with an O-ring and a nut, angled 90° and fitting for hose measurement. Connection occurs as: L (series light) and S (series heavy), A fitting whereas Intended is for hoses DN2 or DN4 and supplied in set with a clamping ferrule. Material: steel with coating zinc-nickel. Working pressure: from 250 bar to 630 bar - depending on size. sealing: O-ring NBR. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection metric ISO 12151-2 24° cone with an O-ring and a nut, straight and fitting for hose measurement. connection occurs as: L (series light) and S (series heavy), A fitting whereas Intended is for hoses DN2 or DN4 and supplied in set with a clamping ferrule. Material: steel with coating zinc-nickel. Working pressure: from 250 bar to 630 bar - depending on size. sealing: O-ring NBR. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement with thread internal 5/8" BSF (standard typical for machine JCB) and fitting Intended for micro-hoses o diameter 2x5 mm. W set also plug with thread external with a cable steel. Material: steel carbon, galvanized. Working pressure: 420 bar. sealing: NBR. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement 5/8" BSF, type British HSP, standard JCB with a cap metal and with thread external BSP, for connection for installation hydraulic. connection equipped is in ball valve. Material: steel carbon, galvanized. sealing: NBR. Working pressure: 420 bar. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement M16x2 with a cap metal. coupling has standard for standards ISO 15171-2, thread M16x2 od side fittings measurement, and appropriate Connection for connection for installation hydraulic with thread external JIC (7/16"-20 UNF, 37° cone) or metric (M16x2). Material: steel with coating zinc-nickel. Working pressure: from 450 bar to 630 bar - dependent od type. sealing: NBR. Operating temperature: od -30°C up to +120°C (od -30°C up to +100°C with a cap with plastic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement M16x1.5 (standard military) with a cap metal and with thread external BSP for connection for installation hydraulic. Material: steel with coating zinc-nickel. sealing: NBR. Working pressure: 630 bar. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement M16x2 with a cap metal or plastic (plastic). coupling has standard for standards ISO 15171-2, thread M16x2 od side fittings measurement, and appropriate Connection for connection for installation hydraulic acc. to DIN 2353, 24° cone, series heavy S. Material: steel with coating zinc-nickel. Working pressure: 630 bar. sealing: NBR. Operating temperature: od -30°C up to +120°C (od -30°C up to +100°C with a cap with plastic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement M16x2 with a cap metal or plastic (plastic). coupling has standard for standards ISO 15171-2, thread M16x2 od side fittings measurement, and appropriate the connection for connection for installation hydraulic with thread external and internal BSP (60° cone). Material: steel with coating zinc-nickel. Working pressure: from 345 bar to 400 bar - depending on size. sealing: NBR. Operating temperature: od -30°C up to +120°C (od -30°C up to +100°C with a cap with plastic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement M16x2 with a cap metal or plastic. coupling has standard for standards ISO 15171-2, thread M16x2 od side fittings measurement, and appropriate Connection for connection for installation hydraulic with thread internal JIC (UNF, 37° cone) or BSP (60° cone). Material: steel with coating zinc-nickel. Working pressure: from 450 bar to 630 bar - dependent od type. sealing: NBR. Operating temperature: od -30°C up to +120°C
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling measurement designed is according to requirements standards ISO 15171-2. used primarily for diagnostics pressure in systems hydraulics power, can be also used for systems lubrication, venting, sampling samples oil and micro-hydraulics. intended for oil hydraulic and oils mineral, made of carbon steel with coated zinc-nickel, with seals with NBR. available in version with a cap metal or a cap plastic (plastic). coupling has standard for standards ISO 15171-2, thread M16x2 od side fittings measurement, and appropriate Connection for connection for installation hydraulic acc. to DIN 2353, 24° cone, O-ring. occurs as: L (series light) and S (series heavy), with a nut wire type A or a nut interleaved type B. Material: steel with coating zinc-nickel. Working pressure: from 100 bar to 630 bar - dependent od type. sealing: NBR. Operating temperature: od -30°C up to +120°C (od -30°C up to +100°C with a cap with plastic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling measurement designed is according to requirements standards ISO 15171-2. used primarily for diagnostics pressure in systems hydraulics power, can be also used for systems lubrication, venting, sampling samples oil and micro-hydraulics. intended for oil hydraulic and oils mineral, made of carbon steel with coated zinc-nickel, with seals with NBR. available in version with a cap metal or a cap plastic (plastic). coupling has standard for standards ISO 15171-2, thread M16x2 od side fittings measurement, and appropriate the connection for connection for installation hydraulic acc. to DIN 2353 for pipes, 24° cone, a nut and rings cutting. occurs as: L (series light) and S (series heavy). Material: steel with coating zinc-nickel. Working pressure: from 100 bar to 630 bar - dependent od type. sealing: NBR. Operating temperature: od -30°C up to +120°C (od -30°C up to +100°C with a cap with plastic).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection measurement with thread internal M16x2 (ISO 1517-2), M16x1.5 or S12.65x1.5 and fitting for hose measurement, supplied in set with a clamping ferrule. Material: steel with coating zinc-nickel or steel AISI 316. Working pressure: 500 bar or 630 bar - depending on size. Operating temperature: od -30°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with thread internal metric, BSP, JIC or ORFS, with a nut swivel and fitting for hose measurement, supplied in set with a clamping ferrule. Material: steel with coating zinc-nickel or steel AISI 316. Working pressure: from 400 bar to 630 bar - depending on size. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection tube angled 90°, for connections using ring and a nut DIN 2353 and fitting Intended for hose measurement. Connection occurs as: L (series light) and S (series heavy), A fitting whereas Intended is for hoses DN2 or DN4 and supplied in set with a clamping ferrule. pressure working dependent od the connection mounted for tube and pressure working hose. Material: steel with coating zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection tube straight, for connections using ring and a nut DIN 2353 and fitting Intended for hose measurement. Connection occurs as: L (series light) and S (series heavy), A fitting whereas Intended is for hoses DN2 or DN4 and supplied in set with a clamping ferrule. pressure working dependent od the connection mounted for tube and pressure working hose. Material: steel with coating zinc-nickel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with thread internal 11/16″-18 UNF enabling connection for socket type 2-HG and 2-HL quick coupling Hansen Beverage. on the other side terminated thread internal or external. Working pressure: 15 bar. Operating temperature: up to +130°C. Material: steel AISI 303.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with thread internal 9/16″-18 UNF enabling connection for plug type 2KGF quick coupling Hansen Beverage. on the other side terminated thread internal or external. Working pressure: 15 bar. Operating temperature: up to +130°C. Material: steel AISI 303.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with thread external BSP, NPTF and fitting for hose measurement, supplied in set with a clamping ferrule. occurs in three variants: with thread external BSP (60° cone), with thread external BSP (sealing flat) or with thread external NPTF (tapered). Material: steel with coating zinc-nickel. Working pressure: 400 bar and 630 bar - depending on size. Operating temperature: od -30°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection with spigot with thread external BSP or metric for connecting hoses with plastics (for hoses polyurethane required minimum Hardness per Shore (A): 98°). Material: brass nickel-plated. Operating temperature: od -15°C up to +130°C. Working pressure: 30 bar. sealing: Viton.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting - Tee "L" with thread external BSPT type AI 13230 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 14 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting DIN 2353 for welding, type ASF: 24° cone with an O-ring NBR; for a nut DIN 2353 type M. occurs as: L (series light), S (series heavy). Material: steel oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting for a metric tube for welding-on type LET-LOK® Intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. The permissible pressure working specifies on the basis of diameter outer and wall thickness wall tubes (details in the attachment). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting socket SKV with a male BSP thread (sealing DIN 3852 type E - gasket elastomer o cross-section rectangular) for use in systems hydraulic. Material: steel galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting straight JIC37° with thread external, under tube. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° adjustable JIC 37° with thread external BSPT (sealing on the thread – PTFE tape or anaerobic sealant). Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° adjustable ORFS with thread external metric (sealing an O-ring with washer), type WE-MG. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° adjustable ORFS with thread external NPTF (sealing on the thread – PTFE tape or anaerobic sealant), type WE-NT. Material: steel carbon, galvanized.



















































