0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control pneumatic, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/3 - five-way, three-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a selector, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control manual, a selector, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type STP L 2/2 one-way in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line) intended for mounting directly in the connection supply actuator (in accordance with direction flow marked in the molds arrow on body valve). correctly connection valve STP L allows on free Flow rate air supply chamber working actuator, whereas not allows on jej venting without supply pressure control on Connection push-in Ø4 (Ø5/32”). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check type VNR L in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line), with holes for mounting wall. Working pressure: 12 bar. sealing: NBR. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve check type VNR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), with holes for mounting wall. Working pressure: 12 bar. sealing: NBR. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valves reducing serial REG, series SKILLAIR®, without plates end, serve for regulation pressure working, ensuring correct operation equipment. can be mounted in series and supplied this same pressure. each with valves can have different setting pressure output, independent od settings other valves. air output drawn is with the connection pressure gauge (1/8”). Size: 100. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Pressure gauge connection: 1/8" BSP female. Flow rate: 950 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valves reducing serial REG, series SKILLAIR®, with plates end, serve for regulation pressure working, ensuring correct operation equipment. can be mounted in series and supplied this same pressure. each with valves can have different setting pressure output, independent od settings other valves. air output drawn is with the connection pressure gauge (1/8”). Size: 100. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female or 3/8". Pressure gauge connection: 1/8" BSP female. Flow rate: 950 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set F + D series SKILLAIR® o high degree reliability consists with filter and with filter accurate air. for the purpose set is cleaning air supplied through compressor and removal with high accuracy contaminants liquid and solid, contained in compressed air. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: Filter - 5 µm, Filter accurate - 99.97% at 0.01 µm. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set F + L series SKILLAIR® o high degree reliability consists with filter air and lubricator. for the purpose set is cleaning air supplied through compressor and lubrication mist oil. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: 5 µm, 20 µm, 50 µm. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Flow rate nominal: od 1200 for 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air F+L, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Assembly preparation compressed air F + L, intended for series BIT. is to compact unit consisting with filter with various stages filtration and lubricator o high stability lubrication. advantages set: 1) high degree separation condensate. 2) manual/semi-automatic or automatic trigger condensate. 3) lubrication at low values flow. Size: 1/8", 1/4". Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: 1/8" BSP female, 1/4". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 600 l/min - 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air F+L, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Assembly preparation compressed air F + L, intended for series NEW DEAL, consists sie with filter with various stages filtration and lubricator o high stability dosing. basic advantages: 1) metal tank with external preview level condensate. 2) manual/semi-automatic or automatic trigger condensate. 3) micrometric regulation doses lubrication. 4) guaranteed work at low values flow. Size: 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 1000 l/min - 1/4", 3500 l/min - 3/8", 1/2", 9500 l/min - 3/4",1"(at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FR+L, series SKILLAIR®

          Air preparation elements (FRL) | All products
          0 €
          Set FR + L series SKILLAIR® o high degree reliability consists with filter air and valve reducing and lubricator. for the purpose set is cleaning air supplied through compressor, reduction and stable maintaining pressure set at fluctuations pressure supply and lubrication mist oil. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: 5 µm, 20 µm, 50 µm. range pressure output: 0÷8, 0÷12 bar. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Flow rate nominal: od 800 for 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Set FRL series SKILLAIR® o high degree reliability consists with filter air, valve reducing and lubricator. for the purpose set is cleaning air supplied through compressor, reduction and stable maintaining pressure set at fluctuations pressure supply and lubrication mist oil. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and kinds trigger. Filtration grade: 5 µm, 20 µm, 50 µm. range pressure output: 0÷8, 0÷12 bar. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Flow rate nominal: od 800 for 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FRL series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Assembly preparation compressed air FRL, with reducer type piston o high degree reliability, intended for series NEW DEAL, is characterized resistance on heavy conditions use. basic advantages: 1) stability pressure set at variable pressure supply. 2) metal tank with external preview level condensate. 3) dose lubrication proportional for flow air. 4) micrometric regulation doses lubrication. 5) guaranteed work at low values flow. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for trigger RA up to 10 bar. Filtration grade: 4 µm, 20 µm, 50 µm. Operating temperature: up to +50°C. Connection: 1/4" BSP female, 3/8", 1/2", 3/4", 1". Connection pressure-gauge: 1/8" BSP female for valve for 1/2", above - 1/4" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 400 l/min - 1/4", 2000 l/min - 3/8", 1/2", 3600 l/min - 3/4", 3700 l/min - 1" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air FRL, series BIT

          Air preparation elements (FRL) | All products
          0 €
          Complete unit mini-FRL series BIT with diaphragm shaped. is characterized high value flow at reduced a drop pressure, high degree separation condensate, dose lubrication proportional for flow air, the possibility use at low values flow. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration grade: 5 µm, 20 µm, 50 µm. Connection: 1/8" BSP female, 1/4". Pressure gauge connection: 1/8" BSP female. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 280 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Assembly preparation compressed air VFR+L, series SKILLAIR®

          Air preparation elements (FRL) | All products
          0 €
          Set VFR + L series SKILLAIR® o high degree reliability consists with valve shut-off, filter air, valve reducing and lubricator. for the purpose set is cleaning air supplied through compressor, reduction and stable maintaining pressure set at fluctuations pressure supply and lubrication mist oil. task valve shut-off is separation the system working od air supply, co occurs in position closed, simultaneously venting configuration. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size. range pressure output: 0÷8, 0÷12 bar. Filtration grade: 20 µm. Connection: 1/4" BSP female ÷ 1". Condensate drain: manual / semi-automatic (RMSA). Operating temperature: up to +50°C. Flow rate nominal: od 800 for 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling with pressure gauge MAN L in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). pressure gauge built-in in metal cover ensures accurate reading despite small sizes. can be directed in any direction through hand turning. Working pressure: 12 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on angled 90° with thread external type C5/C intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in "T" adjustable with thread external, type R 20/A, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality coupling angled 90°, made entirely of steel AISI 316L, series 60130. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Electrically conductive pneumatic hose for potentially explosive atmospheres PA12 TACO
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Lightweight, flexible pneumatic hose made of electrically conductive polyamide PA 12 (surface resistance R 6 Ω/cm). A hose with antielectrostatic properties – it allows dissipation and discharge of electric charges generated during the flow of a substance through the hose or when the hose is rubbed from outside (the hose should be earthed to discharge the charges). It can be used for industrial pneumatic installations, vehicle braking systems, as well as for the flow of paints, varnishes, solvents, chemicals, petrochemical substances – also in explosion-hazard zones (in accordance with the ATEX directive, category 2GD, zones 1.21, 2.22). Use in an explosion-hazard zone (ATEX) should be preceded by a risk analysis carried out by a specialist. The calibrated outer diameter allows connection to the installation by means of push-in fittings (the use of metal fittings and earthing is recommended in order to discharge charges from the installation). Fittings with a crimp ring and push-on fittings can also be used. Standards and requirements: DIN 74324 and DIN 73378 for polyamide hoses used in road vehicles and in the braking systems of these vehicles, ATEX requirements (2014/34/EU) for explosion-hazard zones. Hose material: polyamide PA12 (nylon 12). Hardness: 65 Shore (D). Working pressure: from 15 bar to 51 bar (depending on hose diameter and wall thickness). Operating temperature: from -20°C to +60°C (working pressure depends on temperature).
        • Flame-retardant pneumatic hose for railway applications EN 45545-2, KKS-NEO
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Special hose made of polyurethane meeting high fire protection requirements for rail vehicles, in particular the railway standard EN 45545-2. Flame retardant (UL 94 V2 to V0), halogen-free, self-extinguishing. Compliant with EN 45545-2:2016 - the hose meets hazard levels HL1, HL2, HL3 for R24 requirements - provided that the weight of a single hose section does not exceed 0.5 kg and they are adequately spaced apart from each other. Depending on requirements, the hose's flame-retardant properties can be used in other applications: in construction, industry, machine and vehicle manufacturing. The hose is resistant to hydrolysis, microorganisms, abrasion and UV radiation. Can be used for air, water and other liquids and gases. Characterized by good chemical resistance to fuels, solvents, detergents. Small bend radius facilitates hose assembly installation. Calibrated outer diameter allows connection using push-in fittings. Hoses with an outer diameter of 4, 14 and 16 mm are available on special order. Note: when used for vacuum, the minimum bend radius should be increased by approximately 20%. Available colors: blue, black. Hose material: polyurethane PUR (polyether-based). Hardness: 56 Shore (D). Working pressure: from 8 bar to 13 bar, depending on hose diameter. Operating temperature: from -35°C to +100°C (working pressure depends on temperature).
        • Inch-size pneumatic hose for brake installations PA12 S40 - SAE J844
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          General-purpose pneumatic hose in inch sizes. Made of polyamide PA12 (PA12 S40 PHL). Resistant to water and oily air. Designed and used for pneumatic air brake installations of trucks in accordance with SAE J844 type A standard. Used for industrial pneumatic installations; it can also be used for hydraulic, oil, fuel, lubrication installations as well as for varnishes and solvents. The calibrated outer diameter allows connection to the installation using push-in fittings of inch sizes. The standard colour of the hose is black, which, due to its high UV resistance, is also recommended for outdoor applications. Other sizes and colours of the hose may be available on special order. Standards and requirements: SAE J844:2004 (type A) - Nonmetallic Air Brake System Tubing. According to this standard, unreinforced hoses are marked as "type A", and braid-reinforced hoses as "type B". Hose material: polyamide PA12. Hardness: 65 Shore (D). Working pressure: from 22 bar to 32 bar, depending on hose diameter and wall thickness. Operating temperature: from -40°C to +100°C (momentarily up to +110°C; for water-based liquids up to +70°C).
        • Polyethylene hose for utility water and drinking water LLDPE
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          A light and flexible LLDPE (linear low-density polyethylene) hose designed for cold and periodically hot domestic water as well as for drinking water. LLDPE is stronger than traditional low- or medium-density polyethylene and is recommended for use with water. Typical applications include water purification and filtration systems, water treatment installations, ice-making machines, misting installations in catering and industry. May be used for drinking water in accordance with the relevant certificates. Not recommended for mineral oil, fuels and gases, or for compressed air installations at a pressure higher than 10 bar (20°C). For water, the maximum chlorine content is 4 ppm; higher values may shorten the service life of the hoses. The calibrated outer diameter allows connection to the installation using push-in fittings. Standards and requirements: Food industry, food contact: meets European food contact requirements 1935/2004/EC and 10/2011/EU (simulant liquids A, C and D1), 2023/2006/EC (GMP), as well as American NSF-51 hygiene requirements. Drinking water approvals: PZH (no. B.BK.60110.1534.2023, certificate valid until 16.11.2026), KTW, UBA, BfR (German requirements), as well as WRAS, NSF 4.1 (British) and NSF-61 (American). Hose material: polyethylene (LLDPE). Hardness: 55 ÷ 60 Shore (D). Working pressure: from 10 bar to 16 bar, depending on hose diameter. Operating temperature: from 0°C to +65°C (working pressure depends on temperature).
        • Reducing valve with a lock, REG series SKILLAIR®, with end plates
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          REG pressure reducer, SKILLAIR® series, with lock and end plates, used to maintain working pressure at a specified constant level, ensuring correct equipment operation. Size: 100, 200, 300. Outlet pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - series 300). Working temperature: up to +50°C. Connection: BSP female thread 1/4" ÷ 1". Pressure gauge connection: BSP female thread 1/8". Flow rate: 1600 l/min - series 100, 3500 l/min - series 200, 7000 l/min - series 300 (at inlet pressure 6 bar Δp = 1 bar).
        • Straight push-in coupling with BSP male thread, HP type 40020
          Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight push-in fitting with BSP male thread for connecting plastic hoses (polyurethane hoses require a minimum Shore (A) hardness of 98°). Material: nickel-plated brass. Working temperature: from -15°C to +130°C. Working pressure: 30 bar. Vacuum: 0.99 bar. Seal: Viton.
        Go to Top