0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal pressure gauge mounted for regulators type SYNTESI, BIT, SKILLAIR and NEW DEAL. range measuring should be selected appropriate for pressure use tak, to not exceed ono 75% maximum range. The scale is expressed in bars and PSI. Size: 1/8" or 1/4". Operating temperature: up to +50°C. range measuring: 0 ÷ 4 or 0 ÷ 12 bar. Material housing: plastic. Material disc: aluminum. filling: no (pressure gauge dry).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A socket brass nickel-plated, type A3

          All products | Threaded pneumatic fittings
          0 €
          A socket type A3 Intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nipple of steel stainless type 62000 with thread external BSPT. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pipe polyamide and aluminum used is in installations compressed air. Recommended for the SPEEDFIT system. Material: polyamide, aluminum. color: blue, black. length standard tubes (one section): 3 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt BANJO with washers, type D7

          All products | Banjo fittings
          0 €
          Bolt BANJO with washers type D7 for coupling type R13, R14, D12, D17, D5, D6. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer MWSE with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer MWSE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 28 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic polyurethane PUR E

          All products | Pneumatic hoses
          0 €
          Light, very flexible hose used in systems pneumatic, hydraulic, lines tool, robots industrial, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Retains flexibility at low temperatures. Hardness per Shore (A): 95°. Available in natural and blue. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on the diameter hose). Operating temperature: od -40°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Very flexible, resistant to abrasion, breaking and kinking spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides straight sections o length 100 mm and 500 mm and fitting with thread external BSPT. The stated total length is the maximum hose length after stretching. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on the diameter hose). Operating temperature: od -40°C up to +75°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check RFL L type U (coupling push-in on inlet and the outlet valve) regulates stream flowing air in one direction. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connection with thread external BSPT type B1 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on with thread external BSPT type C1 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality Connection angled 90° with thread external BSPT, made entirely of steel AISI 316L, series 60110. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Elbow swivel, screw with thread external cylindrical, series F type R 31 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in angled adjustable with thread external, type R31, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Body angled coupling BANJO of coupling socket type D5, intended for hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. body angled coupling BANJO allows setting coupling in desired position. screws through-flow for body: D7, D8, D9, D10. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal pressure gauge mounted for regulators type SYNTESI, BIT, SKILLAIR and NEW DEAL with dial square. range measuring should be selected appropriate for pressure use tak, to not exceed ono 75% maximum range. The scale is expressed in bars and PSI. Size: 1/8". Operating temperature: up to +50°C. Diameter disc: 40x40 mm. range measuring: 0 ÷ 4 or 0 ÷ 12 bar. Material housing: plastic. Material disc: aluminum. filling: no (pressure gauge dry).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A socket of steel stainless type 62300 with thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Produced with high quality raw based on ether, retaining through long period time flexibility, hose spiral, giving for use in difficult conditions industrial. has memory shape, thanks to which po many years use Diameter coil remains unchanged. excellent for applications in applications, which require use hoses resistant to abrasion, brittleness and unfavourable conditions atmospheric. equipped in coupling swivel allowing on elimination stresses longitudinal hoses, during ich use. terminated on both sides straight sections o length 100 mm and 500 mm and fitting fitted in quick coupling and plug type 26KA, of spring reinforcing. length working is 80-90% total length line. Hose material: light-blue polyurethane PUR. Working pressure: up to 12 bar (depending on the diameter hose). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Button alloy with a lock VRM-065 R

          All products | Equipment for pneumatic valves
          0 €
          Button alloy with a lock VRM-065 R for valve VME. color: red. Do mounting required is Adapter VME1-000.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Tee "T" thread internal BSP type A11 intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Flexible and at the same time light hose polyamide, intended for installation pneumatic, oil, fuel, hydraulic, resistant to chemicals and greases. It has a calibrated outer diameter, allowing the use of push-in fittings, which significantly shortens and simplifies its assembly. compliant with the standard DIN 73378. Available in colours: yellow, orange, red, blue, green, natural and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness wall hose. Operating temperature: od -55°C up to +100°C (for media based on water +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger type VSR L in version ended on both sides couplings push-in (line - line), trigger silenced at use built-in silencer. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Coupling elbow SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Coupling elbow for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connection angled 90° with thread external BSPT type B5 with a ring cutting intended for connecting pipes copper and hoses with plastics. W case connecting with hoses recommended is use ferrule reinforcing (B12). Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on with thread external type C1/Z intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality Connection angled 90° with thread external parallel (BSP or M5), made entirely of steel AISI 316L, series 60115. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Connection straight with thread external cylindrical, series F type R 1 NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Material: brass nickel-plated. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-in straight with thread external, type R1, Intended for connections lines and other element in systems pneumatic. easy and fast in use for repeated mounting without loss tightness po side mechanical and pneumatic. Material: brass nickel-plated. Working pressure: 16 bar. medium working: vacuum, air. Operating temperature: od -20°C up to +80°C. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Adapter reducing of steel stainless type 62040 with thread external BSPT and thread internal BSP. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A coil 22 mm for valves series 70 of size 1/8" and 1/4", stem Ø8. Insulation class: F155. Voltage tolerance: -10% for +15%. Protection degree: IP65 DIN 40050 with a connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket connection, system SYNTESI

          Accessories for FRL | All products
          0 €
          Do connecting individual element on inlet/the outlet (modules) system Syntesi® type SY1 or SY2 (of each other as and with installations pneumatic) serves hexagonal Adapter made with brass nickel-plated, which easily can remove using two bolts. Material adapter: brass nickel-plated. sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A fitting for hose with thread external type A19, Intended for connecting element pneumatics. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Body angled coupling BANJO with thread internal BSP type D12. screws through-flow for body: D7, D8, D9, D10. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Tee SPEEDFIT, plastic plastic

          All products | Pneumatic piping systems
          0 €
          Coupling - Tee for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Sleeve reinforcing type B12 recommended at connecting hoses with plastics for couplings with a ring cutting series B. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Light and flexible hose o calibrated diameter outer, intended for installation pneumatic, hydraulic, oil, fuel, lubrication and chemicals. resistant to action water and oiled air. hose o elevated resistance, acc. to standards DIN 73378 (P-plasticised, H-stable thermally, L-resistant to action radii UV). standards and requirements: compliant with standards DIN 74324, concerning pneumatic systems brake vehicles road and with DIN 73378, concerning hoses polyamide used in vehicles road. When working at an elevated temperature, the pressure drop with temperature must be taken into account. Available in colours: natural, black, blue, green, red and yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 12 bar to 44 bar (depending on the diameter and wall thickness wall hose). working pressure depends on temperature. Operating temperature: od -40°C up to +80°C (for media based on water +70°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose pneumatic spiral polyamide AC E

          All products | Pneumatic hoses
          0 €
          Spiral hose intended for pneumatic systems control, tools hand, robots industrial, etc. terminated on both sides section simple o length 100 mm and fitting with thread external BSPT. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness wall hose). Operating temperature: od -40°C up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check RFL L type U (Connection threaded with an O-ring on inlet and coupling push-in at the outlet, for actuator) regulates stream flowing air in one direction. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Coupling push-on angled 90° with a male BSP threadT type C5 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting push-in straight with thread external BSP, series S, type PCM. economical solution for connecting flexible hoses pneumatic o metric and inch calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
        Go to Top