0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -55 — 0

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 50 — 150

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF N/C for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob adjustment and/or a screwdriver; possibility securing setting a lock nut. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF/C for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Body material: brass nickel-plated. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF/V for mounting in connections valves directional, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle check type MRF PTC series PUSH-LOCK for direct mounting in connections actuator, used in systems pneumatic for regulation level flowing stream compressed air and direction flow. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting using a knob with a lock PUSH-LOCK. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +50°C. Material: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle type MRF OMB series COMPACT "O" used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver, with the possibility mounting cover protective. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve throttle pneumatic brass MRF/B

          All products | Pneumatic valves
          0 €
          Valve throttle type MRF/B used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Body material: brass nickel-plated.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve throttle type MRF T/B used for simultaneous regulation flow in both directions - during filling and venting, used in systems pneumatic for regulation level flowing stream compressed. equipped in coupling push-in ensuring easy disassembly lines pneumatic. change setting at use a screwdriver. stated Flow rate nominal at pressure 6.3 bar (in direction throttled). Working pressure: up to 10 bar. Operating temperature: od -10°C up to +70°C. Material body: plastic plastic.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve gentle start serves for filling the system working compressed air, o action two-stage. supply signal control causes opening valve shut-off and Flow rate air through valve throttle. Po obtaining through pressure output ok. 40 ÷ 60% value pressure supply occurs switching valve and Flow rate air full cross-section od the connection inlet for output. removal signal control causes shut-off valve supply and venting the system working. valve gentle start found use in installations, in which occurs the need securing powered element actuating against sudden aeration, which can generate loads impact acting on element structural machine. excessive draw air with the connection output in during preliminary aeration the system working can disturb operation valve preventing its solid opening. Size: SY1, SY2. Connection: 1/8" BSP female ÷ 1". Supply pressure: 3 - 10 bar. additional Connection output: 1/8" BSP female for size SY1, 1/4" BSP female for size SY2, with the front and with the back.Operating temperature: od -10°C up to +50°C. Flow rate nominal: depending on size od 1250 l/min for 4800 l/min (at pressure 6.3 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve gentle start, serves for safe introduction air for the system pneumatic, securing element actuating against sudden increase pressure. W version with control electric, without pressure pilot, air flows with the connection inlet for output through valve needle. Po applying external signal control, electric, occurs switching valve and Flow rate air through full cross-section valve. valve not vents the system pneumatic. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow rate: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve gentle start, serves for safe introduction air for the system pneumatic, securing element actuating against sudden increase pressure. valve STD: opens automatically when pressure outlet reaches about 50% value pressure inlet. valve with control pneumatic: without pressure pilot, air flows with the connection inlet for output through valve needle. Po applying external signal control, pneumatic, occurs switching valve and Flow rate air through full cross-section valve. valve not vents the system pneumatic. Size: 100. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Flow rate: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Straight, monostable valve foot without cover protective with sockets in plane face. valve this type serves for control foot through the operator, devices in systems pneumatics. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C up to +60°C. Flow rate nominal: 95 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve shut-off for compressed air V3V, series NEW DEAL

          Air preparation elements (FRL) | All products
          0 €
          Valve shut-off Controlled manually V3V, series NEW DEAL, separates configuration working od air supply. has possibility triple lock, opening valve occurs through pressing button. used system poppet, ensures high value flow. Connection: 1/4" BSP female ÷ 1/2". Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Flow rate nominal: 1500 l/min - for the connection 1/4", 2900 l/min - for the connection 3/8" and 1/2" (at an inlet pressure of 6 bar and Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off V3V electric, series SKILLAIR®, with plates end, serves for separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 3/8". Flow rate: 1650 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V2V L two-position two-way in version ended on both sides couplings push-in (line - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version with connection threaded with an O-ring on one side and coupling push-in on the other side (thread - line). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off type V3V L two-position three-way, with venting the system pneumatic, in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread). version closed on a padlock, secures against opening through unauthorised persons. supplied in set with padlock and two wrenches. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve shut-off V3V manual with a lock, series SKILLAIR®, with plates end. task its is separation the system working od air supply. is to valve normally closed, three-way. W position closed cuts off air supply simultaneously venting configuration, co makes go especially useful during work service. W position rest (closed) can be closed on a padlock co secures valve against switching on through unauthorised persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Flow rate nominal: depending on size for 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger type VSR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), trigger discharged through coupling push-in. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger with regulation throttling type VSRR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), with the possibility regulation flow air outlet, co allows increase speed use actuator. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve fast trigger type VSR L in version of coupling push-in on one side and with connection threaded with an O-ring on the other side (line - thread), trigger silenced at use built-in silencer. Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Precision valve reducing series GS with quick venting, serves for maintaining set pressure on fixed level and fast discharge with the system pneumatic possible surplus pressure. intended for applications demanding high accuracy, e.g. for use with with actuator with reduced a coefficient friction used usually as spring pneumatic o constant characteristics. high Flow rate through valve during aeration and venting the system and high precision settings ensure two identical and opposing valves regulating, separate for the connection supply and output. assembly in installation takes place using brackets assembly or directly, at use holes assembly placed in body valve. range pressure output: 0÷2, 0÷4, 0÷8 bar. Supply pressure: up to 10 bar. medium working: filtered 10 µm compressed air, non-oiled. sensitivity valve trigger: 30 mbar. Operating temperature: od -10°C up to +50°C. Connection: 1/8" BSP female and 1/4". additional Connection for pressure gauge: 1/8" BSP female. Flow rate: 1200 l/min - 1/8", 1380 l/min - 1/4" (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing RP type piston, is characterized resistance on heavy conditions use, Controlled remotely pressure external (pilot), intended for series NEW DEAL. Possibility of wall mounting via holes in the body. Size: 3/8", 1/2". range pressure output: dependent od the pilot control reducer. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 3/8" BSP female, 1/2". Pressure gauge connection: 1/8" BSP female. Flow rate: 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing high-pressure type piston with pressure gauge, serves for regulation pressure working and ensures correct operation in connected za nim installation, independently od changing wear medium. Size: DN12. Material housing: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: od -10°C up to +90°C. Connection: 1/4" BSP female, 3/8". Diameter disc pressure gauge: Ø63. Flow rate: 2000 l/min - 1/4", 2500 l/min - 3/8" (at an inlet pressure of 20 bar Δp = 4 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing REG, series SKILLAIR®, without plates end, serves for regulation pressure working, ensuring correct operation devices. Size: 100, 200, 300. range pressure output: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: 1/4" BSP female ÷ 1". Pressure gauge connection: 1/8" BSP female. Flow rate: 1600 l/min - series 100, 3500 l/min - series 200, 7000 l/min - series 300 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing with a lock REG type piston, is characterized resistance on heavy conditions use, intended for series NEW DEAL. Possibility of wall mounting via holes in the body. has stem with a hole, which is placed in upper parts a knob adjustment. when knob found in position locked exists possibility placement padlock in the bore, co prevents change settings regulator. W set with reducer found padlock and 2 keys. Size: 3/8", 1/2". Output pressure range: 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: 3/8" BSP female, 1/2". Pressure gauge connection: 1/8" BSP female. Flow rate: 2500 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Valve reducing pneumatic cartridge RMS

          All products | Functional fittings
          0 €
          Valve reducing in version insert for direct mounting in device or for mounting block with common supply and various settings pressure air output. range pressure output: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: od -20°C for +60° C. medium: filtered compressed air, oiled or not oiled.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Valve reducing serial REG, series SYNTESI®, without end connections, serves for regulation pressure working and maintaining go on fixed level, ensuring correct operation, in connected za nim installation, independently od changing sie wear medium. W a valve used instead of diaphragm flat, diaphragm shaped, which ensures greater value flow nominal thanks to greater surge diaphragm, as well as greater sensitivity and speed reaction on change setting, through reduction friction static and kinetic components and greater accuracy in maintaining set pressure output at change value flow and pressure supply. mechanism type „push-lock” allows on locking a knob in any position through its pressing. Plate locking allows mounting padlock protective against unauthorised change setting pressure output. are adapted for sampling air with connections with the front and with the back body, which can be used for connection pressure gauge, relay pneumo-electric or fittings push-in, at immediate connection connections input and output. allows to installation any quantity valves reducing one at second, powered with one source, set independently od each other. Size: SY1, SY2. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: od -10°C up to +50°C. Additional connection for a pressure gauge or fittings: 1/8" BSP female for size SY1, 1/4" BSP female for size SY2. Flow rate: 500 l/min - size SY1, 1000 l/min - size SY2 (at an inlet pressure of 6 bar Δp = 1 bar).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control electric (solenoid valve), without a coil control, used most often for control operation actuators. can be mounted in lines, for a wall, directly for actuators or on block connection. Function 3/2 - three-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control electric (solenoid valve), with a coil control, for mounting plate. assembly plate reduces amount necessary lines, silencers and fittings, co lowers costs and increases reliability. is to ideal solution everywhere tam, where occurs the need replacement valve without the ability disconnection lines. Connection input, output and venting is found on a plate connection. Function 5/2 - five-way, two-position. Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a tilting roller, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a tilting roller, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a lever with a roller of assist, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger of assist, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger of assist, used most often for control operation actuators. can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal valve directional o control mechanical, a plunger, used most often for control operation actuators. can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: body valve - aluminum, spool - aluminum nickel-plated, sealing - NBR, Cover end - plastic plastic. Working pressure: up to 10 bar. Operating temperature: -10°C up to +60°C.
        Go to Top