- Home
- All products
Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA general-purpose hydraulic hose. used for installation o lower pressures. It is characterised by high flexibility and lightness. standards: EN 854 2TE. Inner layer: black, oil-resistant synthetic rubber. Reinforcement: a single textile braid. Outer layer: black, oil-resistant synthetic rubber. Working pressure: from 40 bar to 80 bar (depending on the diameter hose). Operating temperature: od -40°C up to +100°C. For water and air, the maximum working temperature is +70°C. For air above 17 bar, microperforation of the outer layer is required.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight, flexible hose intended for air, water and other media. resistant to chemicals, safe physiologically, free of taste. Meets BGA and FDA requirements. Available in colour natural, black and blue. Hose material: polyethylene LDPE. Working pressure: from 5 bar to 17 bar, depending on the diameter hose. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLine - hose spiral polyamide intended for all kinds equipment pneumatic, systems control, etc. terminated on both sides section simple o length 100 mm and fitting with thread external BSPT. The stated total length is the maximum hose length after stretching. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on the diameter hose). Operating temperature: od -40°C up to +80°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible hose delivery intended for conveying LPG (molten and gas) and gas natural. Layer outer resistant to action ozone and conditions atmospheric. antistatic (R 6 Ω/m). It has a copper wire ensuring electrical continuity between the hose ends. made in accordance with the standard EN 1762:2018, type D. Inner layer: black synthetic rubber. Reinforcement: a synthetic braid. Outer layer: black micro-perforated synthetic rubber. Working pressure: 25 bar. Operating temperature: od -30°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe highest quality hose suction-delivery intended for conveying wine, beer, juices fruit etc. substances food free of fats, demanding use rubber free of odour and taste. Contains no phthalates or bisphenol A. Designed for high-class wines and alcohols, for use in breweries and distilleries. Widely used in industry spirits for conveying strong alcohols o a concentration up to 96%. has copper cable ensuring continuity electrical between fitting hose, co increases safety conveying high-proof, flammable alcohol (at mounting should ensure contact cable with fitting). Layer outer resistant to abrasion, aging and conditions atmospheric. standards and requirements : industry food, contact with food 1935/2004/EC, 2023/2006/EC (GMP). Layer inner compliant with FDA 21 CFR 177.2600, BfR XXI kat.2, D.M. 21/03/73. Inner layer: white rubber butyl (IIR). Reinforcement: cord synthetic, steel spiral. Outer layer: red rubber butyl (IIR). Working pressure: 10 bar. Vacuum: 0.9 bar. Operating temperature: od -40°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery light and flexible hose suction-delivery for agriculture, industry food and applications universal. intended water, light chemicals, sludge and sewage, agents protection plants, other liquids (without fat, oils and hydrocarbons). also for air, vacuum conveying dusts, powders, granulates and other lightly abrasive substances bulk (non-greasy). In that case the abrasiveness and the possible problem of static electricity must be taken into account. W industry food It can be used for conveying food hydrated, acidic, alcohols up to 20% e.g. juices, drinks, beer, wine, (simulants A, B, C; up to +40°C). Not recommended for milk and dairy products or food substances containing fats and oils. Reinforcement spiral with hard PVC, resistant on impact, ensures good strength on vacuum and kinking hose. The outer surface is corrugated, smooth inside. hose AGROFLEX LD complies with the European requirements 1935/2004/EC, 10/2011/EU (simulants A, B, C), 2023/2006/EC (GMP). Suitable for temporary contact with food when conveying food substances - under the conditions specified in the manufacturer's declaration of conformity (available at Tubes International). Hose material: green transparent PVC. Reinforcement: white rigid-PVC spiral. Working pressure at a temperature of 20°C: from 2 bar to 6 bar. As the working temperature rises, the hose's working pressure value decreases. Operating temperature: od -10°C up to +60°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose made is with smooth, seamless tube with PTFE. PTFE tube hose extruded is in strictly defined and controlled conditions, co ensures jej highest quality, minimal porosity and maximum possible for obtaining for hose smooth with PTFE flexible and flexibility. braid made is with annealed wire of steel stainless AISI 304 o high strength on stretching 1700 N/mm 2, o strictly controlled angle arrangement and voltage bundles wire braid, co results minimal changes length hose under high pressure. Due to unique properties PTFE (large range temperatures use, resistance to most substances and compounds chemical, negligible adhesion surface) hose SMOOTHBORE perfectly is suitable for conveying substances chemical, food, fuels, oils, paints, solvents, adhesives, dyes, detergents, steam water etc. - as well as for classic installation high-pressure oil hydraulic. W case when identified is hazard electricity static (danger formation and accumulation charges electric), should use hoses SMOOTHBORE made with PTFE antistatic – version antistatic AS. antistatic teflon version AS is black (contains appropriate distributed in PTFE carbon) and has resistance R 8 Ω (in accordance with the standard ISO 8031 anex A). ensures to discharge and dissipation (dissipation) charges electric. Safety factor 3:1, if required is factor 4:1 (e.g. acc. to EN 16643) should multiply value through 0.75. at temperature use above +130°C maximum pressure working given in parameters should reduced o 0.75% on each 1°C above tej temperatures. for example at temperature 170ºC maximum pressure working for hose AF-SWSB-06 is: 240 bar – (170°C-130°C) x 0.75 = 240 bar – 30% = 168 bar. The value "Wall thickness" given in the Technical data refers to the PTFE layer. Hose material: smooth PTFE (teflon). Reinforcement: single braid of steel AISI 304. Working pressure: from 55 bar to 240 bar - depending on the diameter hose. Operating temperature: od -70°C up to +260°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass insert reinforcing used for hoses flexible for connector type AI 13000. Material: brass.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA connector electrical for coils 22 mm, Diameter cable: PG9. color: black or transparent.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA PERROT lever coupling plug with thread external BSP with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Working pressure: up to 10 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap coupling CAMLOCK DC made in accordance with the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality three-way ball valve type "L" with threads internal BSP and holes mounting in body, intended for high-pressure installation hydraulic. Material: steel (body, ball, stem). seal: POM (ball), NBR (stem). Operating temperature: od -40°C up to +100°C (POM); od -20°C up to +100°C (NBR).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve shut-off type V2V L two-position two-way in version ended on both sides couplings push-in (line - line). Working pressure: 10 bar. Operating temperature: od -20°C up to +60°C. medium: filtered compressed air, oiled or not oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve overflow VM80 limiting maximum pressure oil in systems hydraulic. allows free Flow rate liquids between connections P. W moment rise pressure over set value, occurs opening ways T and outflow excess oil for bowl. value pressure opening sets using screws (setting a wrench Allen, lock a lock nut). valve equipped in holes assembly. Material body: aluminum. Material valve: steel galvanized. sealing: NBR. maximum Working pressure: 260 bar. Operating temperature: od -20°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValve FPS allows free Flow rate liquids hydraulic in one direction (A → A1) and opening flow liquids in direction opposite (A1 → A) under a condition supply pressure signal control "X". standard pressure opening flow free (A → A1) 0.5 bar. required pressure signal control "X" for opening flow in direction opposite (A1 → A) determined is through product coefficient actuation and pressure po side A1. Material: steel galvanized (body), hardened steel (stem). sealing: NBR. Operating temperature: od -20°C up to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread external and spring protective intended for hoses with soft plastics. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling push-on straight type C3 intended for connecting hoses with soft plastics. connection occurs through fitting hose on fitting and clamping through tightening a nut. Material: brass nickel-plated. Working pressure: 18 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting angled 90° with thread external BSP, series S, type PLM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C. sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnection straight with thread external tapered BSPT, series F type R 1C NSF. intended for industry food (e.g. for cold or hot water potable). no element plastic, coated coating nickel in special process chemical and seal made of Viton ensure high resistance to action detergents and other agents chemical. is suitable also for many applications in industry chemical, pharmaceutical, electronic and in medicine. Operating temperature: od -20°C up to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: brass nickel-plated. sealing: Viton (approved for contact with food through FDA). standards: NSF/ANSI 51, NSF/ANSI 61.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoupling with thread external for system SPEEDFIT used in installations compressed air. The installation can be made with use pipes with plastic or metal (copper, brass, aluminum). Material: plastic plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: od -20°C up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with thread internal metric and a plug type CAMLOCK A, with gasket, for use e.g. in tankers railway. Material: aluminum. sealing: NBR. Working pressure: 6 bar. Operating temperature: od -20°C up to +30°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBalancer with automatic a lock designed is for relief tools hand, power tools etc. in order to improvement comfort use. through load capacity spring offset weight suspended tools, improving safety and ergonomics, a also helping prevents accidental bleeding, co protects against potential damage. load capacity spring adjustable is using flat wrench. should adjust load capacity balancer for mass suspended tools. Material housing: aluminum cast. Material cable: steel stainless. length cable: 2500 mm. thickness cable: 2.5 mm. Operating temperature: up to +70°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle comb 16 channel, flat-jet, terminated thread external 1/4" BSP. ideal for cleaning and cooling. Bez adapter. Material: blue polyamide. pressure maximum: 6 bar. Operating temperature: od -10°C up to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle HYDROJET for lances. Material: steel stainless. Connection: 1/4" NPT male. Working pressure: up to 280 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling with fitting for hose, with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. ergonomic shape and large button release consists of o convenience handling and ease use. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: od 0°C up to +71°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh quality socket water quick coupling NiTO 1/2" with thread internal and a shut-off valve. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils). For the valve, an EPDM O-ring.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket quick coupling Hansen Beverage with thread internal NPT. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket coupling CAMLOCK B with a BSPT male thread or NPT, made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA LAUX 42 lever coupling socket with "tail" for hose with wide application e.g.: for conveying and unloading bulk materials (grain, flour, feed, granulates, cement, minerals), for pumps pressure and vacuum, for construction temporary installation water and aircraft in construction, mining, agriculture, for systems irrigation. When selecting coupling for medium other than water should pay attention attention on correct selection material the gasket. The standard seal is an EPDM gasket. Material: steel carbon, galvanized. maximum Working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness. Operating temperature: od -50°C up to +120°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsValves check type VNRO / VNROHP intended for closing flow liquids hydraulic in one direction and opening free flow liquids in direction opposite. standard pressure opening 1 bar (available also with other pressure opening from 0.2 bar to 6 bar). permissible direction flow: A → A1. valves type VNROHP equipped are in additional ring sealing allowing on operation at maintaining higher coefficient safety. Material body and stem: steel carbon with coating zinc - nickel, steel stainless AISI 316Ti. sealing: NBR - steel carbon, Viton (FPM) - steel stainless. Operating temperature: od -35°C up to +100°C (NBR); od -20°C up to +200°C (Viton).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° with thread internal and thread external NPT, type 116H, intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow 90° of steel stainless type 62520 with thread internal BSP and thread external BSPT. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow thread external BSPT and thread internal BSP type A10 intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting banjo Intended for mounting using soldering on tubes metric made of carbon steel. A fitting has hole D matched for diameter outer tubes. version with a hole banjo F matched for screws with thread metric. Material ends: steel carbon raw (without galvanizing). in order to selection material soldering and technology soldering please o contact with Tubes International.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial A fitting integrated with a clamping ferrule o finish hygienic Intended for flexible hose THERMOCLEAN®. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting type CNW for welding-in of steel AISI 304 with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel AISI 304.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting flange straight INTERLOCK SUPERCAT, sealing O-ring or different gasket in groove flange, for hose type 4SH, R13 and R15. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting straight NON SKIVE with a thread external metric, with seal on cone 24°, O-ring (CES), series heavy, Intended for crimping in hoses type 4SP, 4SH, R13 and R15 using ferrule crimping TI-N.... assembly: without skiving rubber hose. Material: steel carbon, galvanized.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA fitting with thread external BSP, cone internal 45°. Material: brass. Working pressure: 40 bar. Operating temperature: od -10°C up to +90°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpigot for welding, type WRS, for flange EN 1092-1 PN16 for mounting clamp shell RS or for crimping ferrule TI-LR, TI-LDR. Material: steel AISI 304.



















































