0

Our products

    Filters
      Product categories
      Working pressure [bar]
      Minimum operating temperature [°C]

      Minimum operating temperature [°C]: -273 — 260

      Maximum operating temperature [°C]

      Maximum operating temperature [°C]: 30 — 1100

      Material
      Vacuum resistance
      Standard length [m]
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Cap Intended for socket lever coupling FERRARI, type F.6B, used between other in farm agricultural, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. Operating temperature: od -20°C up to +50°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Automatic Gun filling type 227 with aluminum o flow capacity 60 l/min. intended for oil drive. standard equipped is in Connection swivel 1" BSP female, which prevents tightening hose. has system automatic cut-off fuels. is adapted for use with of all dispensers on stations fuels. Not is intended for AdBlue® and gasoline unleaded. Diameter outlet: 24 mm. Material: aluminum coated rubber. color: black. Flow rate: 60 l/min. connection swivel: tak.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Hose high quality resistant to most demanding conditions use. exceptionally flexible, light and convenient in use. suitable Wall thickness and braid ensures retention shape cross-section hose. antistatic Layer inner guarantees safety at use in zones hazardous. intended for gases medical in accordance with the standard EN ISO 5359. Inner layer: black, antistatic PVC R 6 Ω/m. Reinforcement: a polyester braid. Outer layer: PVC in various colors for markings purpose hose for defined kinds medium – blue (nitrous oxide nitrogen), white (oxygen), yellow (vacuum), black-white (air). Working pressure: 15 bar. Operating temperature: od -15°C up to +60°C.

        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bender for pipes 8 ÷ 22 mm, type M 22

          All products | Hydraulic pipe processing devices
          0 €
          Hand, light device for bending pipes o diameter od 8 for 22 mm. set contains roll bending and sheet-metal, strength case. Dla increasing precision bending roll equipped in scale value angles. greater roll applied are on smaller thanks to this set is lighter. device adapted for mounting in vice. weight: 14 kg.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling for mounting bulkhead with fitting for hose, with valve and without valve shut-off, intended for installation water, chemical, pneumatic, etc. W comparison for massive fittings traditional with balls and sleeve protecting has very low weight. ergonomic shape and large button release consists of o convenience handling and ease use. very efficient valve allows obtain large flow rates and minimal leakage. coupling to also allows on light rotation connected hose, co prevents its twisting and accidental disconnection coupling. use: chemical processes photographic, installations filling batteries and accumulators, sprayers, installations pneumatic and liquids non-freezing, etc. length L - length total. Material: polypropylene. sealing: O-ring EPDM. Working pressure: for 4.2 bar. Operating temperature: od 0°C up to +71°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling CEJN 115 with thread internal and with valve intended for installation hydraulic o very high pressures. used in presses hydraulic, equipment rescue, jacks hydraulic, cutters, etc. optionally socket can be equipped in ring securing against accidental disconnection. supplied standard with a cap in order to protection against contaminants. Material: hardened steel, galvanized. sealing: NBR. Flow rate: 6 l/min (Δp = 4 bar). Diameter nominal: 2.5 mm. Working pressure: 1000 bar (coupling connected). pressure bursting: 2600 bar. Operating temperature: od -30°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket quick coupling DN11.8 with thread external facilitating fast connection gun for water with a hose or with other accessories for washing. Material: steel AISI 303/304L. Material balls: steel AISI 316. sealing: Viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          High quality socket water quick coupling NiTO 1/2" with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. sealing: NBR (not is suitable for gasolines and oils).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Socket quick coupling with fitting for hose, HANSEN BEVERAGE

          All products | Quick couplings for the food industry
          0 €
          Socket quick coupling Hansen Beverage with fitting for hose. coupling available in two versions: for gases type 2HG and for liquids type 2HL. versions te not are interchangeable of each other (different Diameter plug), co allows on avoiding mistakes in connection. Recognizing version is very easy. Dla fittings for gases ring identification on in the socket is white, a hexagon on plug has a notch. Dla fittings for liquids ring identification on in the socket is black, a hexagon on plug not has a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket with a shut-off valve quick coupling diagnostic, with thread internal NPT, used for measuring pressure in systems hydraulics power. made according to standards ISO 15171-1 and SAE J1502, interchangeable of couplings other manufacturers. plugs quick coupling with hardened steel are standard mounted on fixed in system hydraulic, a socket quick coupling connected are line with pressure gauge. connection socket with a plug should take place only at non-operating system, at the absence pressure or very low pressure a few bar. socket and plug equipped are in valves ensuring Leak-free connection and disconnection and tightness. Ich flat surfaces limit for minimum residual leakage oil and inclusion air for the system (leakage ok. 0.1 ml at disconnection, inclusion air ok. 0.02 ml at connecting). Dla correct operation important is retention purity surface valves. Working pressure: 400 bar. pressure bursting: 1300 bar. Vacuum: for 0.9 bar. Flow rate oil hydraulic at Δp = 3 bar: 4.2. Material: steel galvanized. sealing: NBR. Operating temperature: od -40°C up to +120°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Socket coupling CAMLOCK C with a serrated hose fitting made in accordance with the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer coupling, especially in the petrochemical industry. Working pressure: up to 10 bar - in depending od size coupling. Material: steel AISI 316. Levers: steel AISI 304. Sealing: NBR.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A PERROT lever coupling socket with fitting rolled for hose with wide application, between other in agricultural holdings, horticulture, industry, construction, construction ways and tunnels, dewatering waters ground, treatment plants, discharge sewage, protection environment. Material: steel carbon, galvanized. sealing: SBR. Working pressure: up to 10 bar (up to 8 bar – for size 216 mm).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting for hose with thread external BSPT, steel stainless, type VT123

          All products | Fittings (pipes, fittings and connectors)
          0 €
          A fitting for hose with thread external BSPT. Material: steel AISI 316. Working pressure: 10 bar. given dimensions are indicative and can slightly differ depending on the manufacturer.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A fitting with thread external BSPT, steel carbon, type CNP

          All products | Low-pressure fittings and adapters
          0 €
          A fitting type CNP terminated thread external tapered BSPT of galvanized steel with "tail" for hose. Intended for hoses rubber and plastic hoses industrial. assembly using bands, straps or special sheet-metal ferrule clamping type CNFL. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Plug for cleaning hoses and pipes intended for equipment ULTRACLEAN. removes fine particles contaminants bulk with surface internal hoses and pipes. cleaning consists in on perforating plug using compressed air. Available the scope diameters 2 ÷ 95 mm. possibility sale in packaging collective (amount pcs in packaging collective dependent is od diameter outer plug).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Light hose ducting for conveying dusts P2PU, P2PUAS

          All products | Ducting and ventilation hoses
          0 €
          Very Light, flexible hose intended for discharge air, vapours oil and fuels, dust, dusts, very fine sawdust, chips and light bulk materials. Dla all types industry, in particular often used for dedusting and discharge vapours and fine particles solid in industry wood, furniture, ceramic, plastics. very pliable and very compressible axially, flexible also in low temperatures. O sound resistance to abrasion, in version AS with polyether resistant also on microbes and hydrolysis. non-toxic, Contains no halogen compounds or plasticisers. Resistant to oils and petrol. Assembly on connectors with bridge clamps (prawo-handed). Other diameters may be available on special order. hose Available is in following versions: P2 PU – version with polyester - polyurethane, o very sound resistance to abrasion; P2 PU AS – version antistatic (R ≤10 8 Ω, compliant with TRBS 2153, for extraction also with TRGS 727), made with polyether - polyurethane, o sound resistance to abrasion, resistant to microbes and hydrolysis. Hose material: transparent polyester-polyurethane (P2 PU), polyether – polyurethane (P2 PU AS). Wall thickness measured between the spiral: 0.4 mm. Reinforcement: spiral with wire steel. Operating temperature: od -40°C up to +100°C (momentarily for + 125°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Pressure gauge 63 mm glycerine with connection lower, FM 631

          All products | Manometers reducers and valves
          0 €
          A universal pressure gauge industrial 63 mm with connection lower FM 631, produced in accordance with the standard EN 837-1 in housing of steel stainless with filling glycerine. pressure gauge resistant is on shocks, vibration, moisture, o elevated resistance to sudden rises pressure, intended for straight measurements pressure liquids o low viscosity, vapours and gases, not operating corrosion on alloys copper and not crystallising. filling pressure gauge glycerine promotes reduction fluctuations indicator and reduction wear parts moving mechanism at pulsations pressure and vibration. also prevents condensation and formation atmosphere corrosion inside pressure gauge, which could damage parts internal. range measuring should select appropriate for pressure use, tak to pressure fixed or slowly changing not exceed 75% range; pressure pulsating not exceed 60% range and pulses pressure not exceeded maximum range. Diameter disc: 63 mm. Material: housing - steel AISI304, sight glass - plexiglas, Connection - brass, mechanism - brass and alloys copper, filling - glycerine. Class accuracy: 1.6. temperature ambient: od -40°C up to +65°C. temperature medium: maximum +60°C. Connection bottom: 1/4" BSP male (G 1/4 B, EN ISO 228-1, B means tolerance thread).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal pressure gauge mounted for regulators type SYNTESI, BIT, SKILLAIR and NEW DEAL. range measuring should be selected appropriate for pressure use tak, to not exceed ono 75% maximum range. The scale is expressed in bars and PSI. Size: 1/8" or 1/4". Operating temperature: up to +50°C. range measuring: 0 ÷ 4 or 0 ÷ 12 bar. Material housing: plastic. Material disc: aluminum. filling: no (pressure gauge dry).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Strong industrial hose delivery for water and for compressed air, intended for use in heavy conditions in industry, construction ways, a even in quarries. Layer inner resistant to mist oil. resistant to abrasion and conditions atmospheric. commonly used and proven in various use industrial. hose Available in colour black and yellow. Standard length: 60 m (or 120 m - contact Tubes International). Inner layer: black rubber SBR. Reinforcement: cord synthetic. Outer layer: black or yellow EPDM rubber. Working pressure: 20 bar. Operating temperature: od -30°C up to +70°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A socket brass nickel-plated, type A3

          All products | Threaded pneumatic fittings
          0 €
          A socket type A3 Intended for connecting element pneumatics (in this hoses) of each other. tightness connections requires with rules use additional seals. W case thread tapered tape PTFE or sealant, in case thread parallel washers aluminum or copper. Material: brass nickel-plated. Working pressure: 60 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Mini Grease nipple Intended for direct connection for tools pneumatic, such as keys pneumatic, grinders etc. in order to lubrication tools mist oil. thanks to short way od lubricator for tools, ensured is fixed supply oil. level filling is always visible. such solution protects element internal against corrosion and reduces wear cooperating element. mist oil formed is through flowing stream air. dosing oil is already set factory and is ok. 50 mm 3 on 1m 3 flow. one dose is enough on ok. 10 hours at flow capacity 109 l/min. oil (index: EW-583) should order separately. maximum Working pressure: 8 bar (recommended 6.2 bar). Operating temperature: od -5°C up to +60°C. Material: NBR (sealing), aluminum (housing), acetal (reservoir).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Nipple of steel stainless type 62000 with thread external BSPT. Material: steel AISI 316L. Operating temperature: od -20°C up to +225°C. Working pressure: 140 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp shell RS (EN 14420-3/DIN 2817), steel stainless

          All products | Clamps and ferrules for fittings and hoses
          0 €
          A clamp shell Intended for fastening hoses on standard ends (smooth) with a flange securing. Material: steel AISI 316. pressure working 25 bar (at appropriate selected hose and the tip EN 14420-3).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A clamp crimping for hose, two-part with loose tongue, DIN 20039 A, cast iron

          All products | Clamps and ferrules for fittings and hoses
          0 €
          A clamp two-part, made compliant (for diameter hose 38 mm) or close (od diameter hose 50 mm) for standards DIN 20039 A, with separate inserts - "tongues" pressure. Intended for mounting ends and fittings with part hose („tail”) without lock (flange securing), made with high quality cast iron ductile galvanized (with yellow passivation free od chromium hexavalent). indexes od LU-SL-400 for LU-SL-988, are additional reinforced and intended for large diameters. Material: malleable cast iron galvanized. at appropriate mounting, appropriate selected hose and the tip pressure working up to 16 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A guard spiral PROTECTOR Intended for securing hoses (cables) against abrasion, impacts and crushing. serves also for holding group hoses (cables) in the molds beam. improves visibility covered hoses. resistant to acids, oils, solvents and radiation UV. Dla diameters external od 75 mm for 140 mm sections have hole facilitating connection in greater length (not refers to coils). easy in installation both against, as and po mounting hose. Available in color black, yellow and red. Material: polyethylene (HDPE). Operating temperature: od -50°C up to +100°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Thermal A guard hoses, cables and lin in the molds sleeve. resistant to flame, abrasion, oils and most industrial chemicals. used in steelworks, smelters metals and glass, foundries - splashes molten metal, glass not adhere for cover. used also for cover installation steam and hot oil - protects against burns and losses energy. very good resistance to moisture makes, that can be used also on outside. on request Available in other colors. Available on request version VCO with flame-retardant hook-and-loop (velcro) in the scope diameters od 22 mm for 140 mm, in lengths for 30 meters. assembly hook-and-loop causes, that A guard can be easily installed without disconnecting lines, cables czy pipes. Material: fiber glass coated silicone in color rust. Operating temperature: od -54°C up to +260°C (up to +1093°C through 15 ÷ 20 minutes), (up to +1650°C through 15 ÷ 30 seconds).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Ring sealing API, steel carbon, type BX

          All products | Oil and gas industry couplings
          0 €
          Steel ring sealing type BX intended for connecting and sealing specially machined flanges with groove. has hole enabling equalisation pressure. ring this type It can be used only and only for flanges and grooves API BX. used in connections for high pressures and temperatures. detailed information on about dimensions ring found in switching on. Material: steel carbon. Working pressure: up to 1500 bar. Operating temperature: od -40°C up to +500°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          A universal Gun intended for removing with surface all contaminants: liquids, fine chips, filings etc. light The design and ergonomic shape ensure easy and convenient use. Do liquids and media aggressive recommended Gun with nozzle of steel stainless AISI 316. mechanism lever allows precision dosing flowing medium. Available model with regulation flow. compliant of the standard OSHA 1910.95 (b) and the directive 2003/10/EC. Material body: acetal. Material nozzle: steel galvanized or steel AISI 316. Diameter nozzle: 8 mm. sealing: NBR. Working pressure: 16 bar. Operating temperature: od -10°C up to +80°C. Flow rate: 380 l/m (at a pressure of 8 bar). level sound: 85 dB (at a pressure of 8 bar). force air blowing: 3.92 N.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Water gun brass, NiTO HEAVY DUTY

          All products | Low-pressure water spray guns
          0 €
          Industrial Water gun resistant to heavy conditions use with adjustable nozzle outlet, regulation flow and a lock trigger. housing: EPDM rubber. Working pressure: up to 25 bar. Flow rate: 25 l/min - narrow stream, 42 l/min - wide stream (5 bar). Operating temperature: up to +80°C.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Crimping press FINN-POWER P16 AP

          All products | Hose and tube assembling machines
          0 €
          Press P16 AP o pneumatic drive pump hydraulic Intended for workshops repair, points service, etc. adapted is for use with interchangeable sets jaws (ordered separately). has An electric (battery) indicator of reaching the crimping diameter. Np. for range diameters crimp od 10 for 45 mm should order 8 sets jaws standard od FP-16-10 for FP-16-31, where largest diameter crimp obtained on jaws main, which range is 38 ÷ 45 mm.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ready line made with hose SUPER HYDRO WASH 1SC or with hose SUPER HYDRO WASH 2SC with restrictors deflection intended for equipment for cleaning hot or cold water under pressure. resistant to conditions atmospheric, agents cleaning, oils. length line: 10 m. Inner layer: black synthetic rubber. Reinforcement: a single steel braid or a double steel braid. Outer layer: micro-perforated polyurethane. Working pressure: 230 bar (1SC) or 400 bar (2SC), depending on type hose. Operating temperature: od -40°C up to +120°C (momentarily up to +155°C).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Fitting straight PUSH-IN for hose terminated thread external BSPT or metric. Do use in technology lubrication. recommended material joined hoses is polyamide. Body material: brass nickel-plated. Material seal: O-ring (HNBR). Operating temperature: od -30°C up to +150°C. maximum Working pressure: 150 bar (for liquids), 30 bar (for air).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Fitting straight with thread external BSPT, brass, type AI 13480

          All products | Low-pressure fittings and adapters
          0 €
          Fitting straight with thread external BSPT type AI 13480 Intended for connecting pipes copper, brass, steel, aluminum etc. and pipes and hoses with plastic (e.g. polyamide). range diameters external joined pipes od 4 for 22 mm. tightness connections obtained is through clamping ring on joined pipe and simultaneous pressing tubes with a ring for socket using a nut. standard: EN 1254-2. Material: brass.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Pipe hydraulic precision HPZ, HPC

          All products | Hydraulic pipes
          0 €
          Seamless pipe of steel improved drawn on cold. given pressure working is pressure theoretical acc. to DIN 2413-93. Material: E235+N according with EN 10305-4. St (HPC1). 37.4 NBK acc. to DIN 1630 (HPZ1). coating tubes galvanized free od Cr VI. length standard tubes (one section): 6 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Pipe polyamide and aluminum used is in installations compressed air. Recommended for the SPEEDFIT system. Material: polyamide, aluminum. color: blue, black. length standard tubes (one section): 3 m (shipping in sections 1 m, 2 m or longer po agreement costs transport).
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Bolt BANJO with washers, type D7

          All products | Banjo fittings
          0 €
          Bolt BANJO with washers type D7 for coupling type R13, R14, D12, D17, D5, D6. Material: brass nickel-plated. Working pressure: 18 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          A rail for clamp DIN 3015 standard and double

          All products | Clamps for hydraulic pipes
          0 €
          A rail Intended for mounting clamp DIN 3015 standard type 100/101 and clamp DIN 3015 double type 301 using a nut ADES or ADESD. shipping in sections 2 m. Material: steel carbon or steel AISI 304.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details

          Silencer MWSE with male thread, brass

          All products | Equipment for pneumatic valves
          0 €
          Silencer MWSE with thread external used in systems compressed air in order to reducing level noise. reducer noise that can obtain through assembly silencer, measured at pressure supply 5 bar, in distance 1m and under angle 45° od axis silencer, is average depending on size 28 dB. Material: brass nickel-plated, bronze sintered nickel-plated. Operating temperature: od -10°C up to +80°C. Working pressure: 12 bar.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule sheet-metal type H used for crimping hoses on ends not having lock connecting sleeve with fitting. can be also used on ends NiTO and on ends quick couplings. Do crimp ferrules sheet-metal can be used hoses low-pressure for ok. 30 bar (depending on the diameter), made with various materials, under a condition, that Material hose is sufficiently soft for this kinds crimp. primarily hoses rubber of reinforcement textile and hoses, PVC. exists also possibility crimping hoses with a steel braid (e.g. hose type PZ). diameter inner ferrule should select appropriate for diameter outer hose, returning simultaneously attention, to Diameter hole in front parts ferrule fit for used fittings. Diameter D2 - Diameter inner. Diameter D3 - Diameter hole. Material: steel carbon, galvanized.
        • Select options This product has multiple variants. The options may be chosen on the product page / Details
          Ferrule IL4 for hoses hydraulic rubber with a braid spiral type 4SH, R13 and R15. Use only with fitting hydraulic INTERLOCK od this the same supplier. assembly - skiving external and internal. Diameter D1 - Diameter outer. Diameter D2 - Diameter inner. Diameter D3 - Diameter lock. Material: steel carbon, galvanized.
        Go to Top